Denna uppsats analyserar och prövar den ledningsteori som är framlagd av Martin vanCreveld i boken ?Ledning i krig?. Prövningen tar sin utgångspunkt i Poppers metod omteoriprövning. Van Crevelds slutsatser testas först internt och sen överses teoribilningenslogiska form. Slutligen jämförs slutsatserna med andra teorier om ledning ochorganisation.

This is a final thesis done at BT, considering one of their forklift truck models called Reflex. The first part of this report is about a preliminary investigation investigating what kind of diagnostic systems BTwants to use, and also which demands there are to meet all expectations on such system. Secondly a diagnostic system, which will show if the drive wheel is worn out, will be presented. In the preliminary investigation, two kinds of diagnostic systems were mentioned. These were Model based diagnosis and Predictive analysis.

The aim with this report is to investigate what influence the way playgrounds are used throw the case study in Vänersborg, and also to find methods for municipalities to collect information about how playgrounds are used. The methods were observations, interviews with parents and children, a questionary with questions about what playgrounds they used, how often and why they used them and what the children used to do there. There was also a demographic investigation and documentary research. The most popular playground, Skräcklan, gets visitors from all parts of the municipality. It is located in a park with a view over the lake Vänern, there is a parking place and a café and it has furthermore a large area and many play equipments. Many of the families make shorter trips and picnics to this place. In exception of this playground, the families almost always go to the playground in their neighborhood and their part of the town.

Volvo in Arvika produces wheel loaders, and the production is based on forecasts. When a machine is ordered, the customer can choose what type of equipment he or she wants, and these equipments are also made forecasts on. This is made by giving each equipment an estimated procentual usage that shows how many of the machines that will use this option. Today two people are working with the forecasts, planer A in Eskilstuna and planer B in Arvika. Planer A makes a forecast based on the historical outcome and planer B then makes adjustments of this based on how many options that are ordered.

Researchers today anticipate that in the near future, the majority of the owners of a smartphone will use it as a wallet, i.e. for contactless payment. The technology that enables contactless payment today is ?Near Field Communication? (NFC), which is increasingly embedded in smartphones. Applications like mobile payment between a phone and a terminal use NFC.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

Denna rapport tar upp grunderna inom programmering mot Windows Outlook 2007. Den är tänkt att ge en inblick i hur man kan gå till väga och vilka verktyg man kan välja för sitt projekt. Den innefattar en jämförelse mellan användning av det inbyggda Visual Basic for Applications och att skapa ett insticksprogram med Visual Basic. Rapporten innefattar även en textuell beskrivning hur man kan skapa ett enkelt ärendehanteringssystem i Outlook 2007 med möjlighet till registrering av ett nytt ärende via en webbapplikation..

In my work as speech and language pathologist I often meet people emerging from coma andtheir experiences intrigue me. Coma is an eluding human condition that offers a challenge formodern science and our view on body and mind. In my Master project in Creative Writing Iwanted to try to enter this zone that is so hard for a clinician to reach: the personal experienceof being in a coma. By writing HUSK MIDAS I have tried to create a realistic fiction based onresearch on coma state and real-life stories of people waking up from coma.In my exploration of the coma state I found that lucid dreaming is common apart fromdreaming, many patients experience sensory inputs like sound and touch which aremisinterpreted and woven into dreams and creating a feeling of confusion and fear.Coma is a frequent theme in literature and film but is often depicted unrealistically andmisleadingly. A few works like Artur Lundkvist?s Journeys in Dream and Imagination andthe film The Descendents by Alexander Payne show a more reality based fiction.

The purpose of this project is to analyze earthing systems for houses. By practical measurements and theoretical analyzes consequences of possible faults, that can occur within the facility and in the low-voltage distribution network, is illustrated.  The reason for this project is that nowadays one has to arrange with a main equipotential bonding system for buildings. Apart from that, if necessary, bathrooms must be provided with a supplementary equipotential bonding system.The practical measurements verify that potential differences in facilities may be due to voltage drops in the PEN conductor between the origin of the electrical installation and the power transformer.Based on the theoretical analyzes of possible faults, it is considered that the requirement for  supplementary equipotential bonding systems for bathrooms in most cases can be questioned, when basic insulation, fault protection, residual current devise and main equipotential bonding system already provides an adequate level of protection.A PEN conductor loss may result in a situation where metallic parts attached to the equipotential bonding system starts working as earth electrodes. Equipotential bonding system may also increase the incidence of stray currents. If TN-C-S systems is provided with a local connection to earth a redundant system against PEN conductor loss is obtained.

This report contains CFD-simulations of cable tray fires in nuclear power plant applications with the CFD-code SMAFS. Furthermore the report evaluates the use of CFD-codes within this kind of problems. The assessment of this report is that there is a tendency towards the good use of CFD-codes but before using it solely more research has to be done on the subject..

This thesis processes the work of developing CPU code and GPU code for Thomas Kaijsers algorithm for calculating the kantorovich distance and the performance between the two is compared. Initially there is a rundown of the algorithm which calculates the kantorovich distance between two images. Thereafter we go through the CPU implementation followed by GPGPU written in CUDA. Then the results are presented. Lastly, an analysis about the results and a discussion with possible improvements is presented for possible future applications..

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The idea with constructions made out of prefabricated elements is that it should be quick and easy to build as the demands for lower production costs, increased profitability and shorter production times are constantly increasing. High accuracy in measurements and well-balanced tolerances is required to achieve this. The fact that the concrete-elements doesn?t fit and that damage occurs during assembly is a highly topical issue even though we now have methods and systems that make this high-intensity construction possible. Through this report we want to highlight the problems that cause the dimensional and tolerance problems and give suggestions on how to come to terms with these.

The Multispectral Canopy Reflectance Model (MCRM) by Kuusk (1995) has beenused to simulate the reflectance of a sugarbeet canopy. The simulated reflectancevalues show high absorptance in the VIS area, compared to field measurements, andhigh reflectance values in the NIR area. The errors may be due to overestimation ofclorophyll content in the sugarbeet leaves and scattered light during fieldmeasurements. The estimation of the clorophyll content where carried out using thePROSPECT-model by Jacquemoud & Baret (1990).During the vegetation period, the state of the canopy moves towards a closed canopy,with sparse vegetation in spring. The MCRM-model was used to perform a ?spring?simulation, which was compared to the original simulation.

This report describes an investigation of the indoor climate in two different workspaces. Since we a big part of our lives are staying indoors in artificial environments, and more particularly in our workplaces, we think it would be interesting to do this investigation. The technical solutions for air treatment systems began with simple natural systems without fans and where the thermal rise of the air applied. In modern time is technical air treating systems used to take care of the fresh air supply. This type of units can supply filtered air with the right temperature to the building. Well-functioning ventilation is essential to bring clean fresh air to the room and effectively remove impurities without sound- or draught problems. The indoor climate is relevant for the output capacity.