The purpose of this study was to increase the level of knowledge in the field of Environmental Impact Assessment (EIA) for wind power. The study includes six wind power farms in the County of Västerbotten in northern Sweden. The main questions were: What are the real dimensions of roadways and land claims for both roads and wind power turbines? How do those dimensions correlate with the dimensions stated in the EIA? Are there any differences in values of the dimensions between the wind power farms that are included in this study? The width of the roadways and the land claims for both roads and wind turbines in wind power farms were examined on site. The results from the examinations were compared with the dimensions available in the EIA for each wind power farm.

The Yara N-Tester is a handheld chlorophyll meter which can be used in several different crops as an aid to determine if there is a need of complementary fertilization with nitrogen (N) or not. If the crop requires more N the N-Tester will recommend an amount in kg per ha. The possibility to assess the need of N depends on the strong relation that exists between chlorophyll- and N-concentration in the leaves of plants. In the multiannual trial series ?Nitrogen to winter wheat at different soil conditions? measurements with the N-Tester was carried out at flag leaf emergence (GS 37). In this work the result of measurements, the NTesters ability to estimate the need of N in winter wheat, will be presented for the years 2008-2011.

When harvesting ley you hope to get a fast drying and a faster harvest. If there is a system with round bales, you need to have a dry matter close to 45 %. To make this as fast as possible, there is made a machine which pick up the grass with an pick-up. It turn the grass over and put it behind the machine (figure 2 and 4). There are few tests to prove the efficiency of this machine.

Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

Choosing the right user experience evaluation method can be difficult, choosing the right one for mobile user experience can be even more so. One major cause is that mobile usage is context dependent. Another contributing factor is that there is not one widely adopted theory or framework for user experience due to its complexity.The purpose of this study was to evaluate an existing method artifact in its feasibility for evaluating mobile applications. The chosen method, AttrakDiff2 is a self-reporting semantic differential questionnaire to evaluate the user experience of an interactive product, based on its hedonic and pragmatic qualities.A study was conducted where the participants assessed one mobile and one web application, which were later rated with AttrakDiff2. The completion of the questionnaire was conducted as a think-aloud session subsequently followed by an interview.The results suggest that the participants experience was affected more by the evaluated application style than the different platforms.

This bachelor thesis aims to investigate how social workers in Uppsala describe their procedure when investigating applications for housing assistance (i.e. boendestöd). Boendestöd is a specific type of services for people with disabilities, which aim to assist them in their lives. This welfare service is one of many regulated by the framework legislation that is the social services act (SoL 2001:453). Previous research indicates that civil servants who make decisions based on goal-oriented framework legislations like SoL, have a great freedom to act when they make judgments and decisions.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

Among the Indigenous cattle breeds in Indonesia, the Bali cattle is the most preferred by small farmers. The Bali cattle is a beef breed, and is considered to have several advantageous characteristics and to be well adapted to the country?s harsh environmental tropical conditions with drought and rain. The main aim of this project was to phenotype of Bali cattle from different locations in order to identify and document diversity within the Bali cattle breed based on their observable characteristics, to compare cattle from different areas and production systems to see the effect of management on phenotype. In this study, 107 cows and bulls of the breed Bali cattle, from Kalimantan, Sumatra, Lombok and Bali were phenotyped.

In an attempt to develop a more cost-efficient material for solar   energy applications, nano-particles of nickel oxide composite in a silikatmatris manufactured with solar gelmethod and studied structurally by electron microscopy. Furthermore, the thin film optical properties characterized by Variable. Angel Spectroscopic Ellipsometry. Sol gelfilms suitability as a selective absorber surface is also analyzed by optical modeling..

I denna rapport presenteras ett sätt att detektera handskrivna ordobjekt i inskannade dokument. Rapporten belyser också några av de problem som förekommer vid detektion av handskrivna ordobjekt. Detektionen görs med hjälp av en indelning av bilden i rektangulära regioner. Därefter används enmaskininlärningsalgoritm för att klassificera regionerna som antingen handskriven text eller övrigt.För att klassificera en region behövs mätvärden för en region, såsom area, som en algoritm kan använda. De flesta som testas och används i denna rapport har använts tidigare för att detektera handskriven text.

The horse has been domesticated for several thousand years. It has gone from being used primarily for food and transportation, to become one of the most popular pets in Sweden. With over 150,000 practitioners, horseback riding is one of the biggest sports in Sweden and there is a variety of specializations to choose from. One orientation is western riding which is a broad sport with several disciplines where most originate in cattle work and other ranch tasks. Western riding is a growing sport in Sweden with an increasing number of practitioners and with many different organizations and associations, it is important that the correct knowledge of the equipment used is disseminated. Artificial aids are available in a variety of designs and the most common variants used by western riders in Sweden is draw reins or some forms of martingale.

When a disaster occurs the main focus is on the loss of human lives. Here the environmental effects have been in the centre of attention. This work has had two main purposes. The first one was to formulate attributes, variables that together present a complete picture of the consequences that an event has had on the environment. The other main purpose was to investigate how people value the impact that a disaster can have on the environment.

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

 We have chosen to write our thesis within a transport company. The work was carried out at DHL activities in Uppsala. DHL is one of the leading transport companies worldwide. Our interest lies in more efficient and advanced transportation and terminals, as globalization and new trends require effective solutions.The aim of our work is to explain the need for information technology applications in road haulage and associated terminal operations. Furthermore, we analyses terminal and applied information technology.

A method for measuring the total impulse from a multi hole diesel injector, introduced inprevious thesis work, ?Development of a method and a device for measuring the momentumrate of fuel sprays?, by Mikael Lindström, has been further developed and tested. The conceptis to simultaneously deflect all sprays from a multi hole diesel injector by using a bell shapeddeflector. The fuel sprays are deflected straight down from their initial umbrella angle, andthe resulting deflection force is measured in a thin strained section of the load cell. The strainis given by three strain gauges, with quarter-bridge circuitry for each gauge.