This report was written by Lisa Bengtson and Hanna Paradis and describes the degree thesis "Environmental impacts of solid waste treatment in the Metropolitan Region, Santiago, Chile ? a comparison between current system and incineration with energy recovery". The purpose of this thesis was to investigate if incineration with energy recovery could be motivated through an environmental perspective as an alternative to landfilling of solid waste in Santiago, Chile. The study was performed with Life Cycle Analysis as a theoretical base. In Santiago, situated in the thirteenth region of Chile, Región Metropolitana, lives 6,5 million inhabitants. The major part of the solid waste produced in the region is landfilled on three different sanitary controlled landfills situated outside the city center.

Biological pest management is defined as control of pests using their natural enemies. This method has been used in Sweden since the 1970´s and it has been developed ever since. Biological pest management is today relatively common among commercial growers but there are good possibilities to apply this method in the home gardens as well. The aim with this thesis is to compile a report from both the companies that are marketing the products and the home gardener´s point of view. This should give a better understanding of the market and how it could be improved. We will give examples of products that represent the different kinds of organisms that are being used in biological pest management. Our hope is that this will be an introduction to all interested in biological pest management. The legislations regarding registration of organisms are still a matter of discussion and are causing problems to producers, distributors and the market in general. Why isn´t biological pest management more common in the home garden? The main reason appears to be the lack of knowledge in the subject. What are the benefits using biological pest management when it requires so much knowledge and it´s more expensive than conventional pest management? With the environmental problems we face today, we hope that every single gardener has an interest in developing an environment as clean as possible, even if only in one's own backyard..

The EU Council adopted in 2007, environmental and energy goals with the aim of them must be met by 2050. This, in combination with those of the Swedish government 15 enacted environmental goals is supposed to lead the way for the Swedish environmental work.This report has examined measures in properties in the Swedish Cooperative Housing Society (SKB) stocks.The report discusses a range of measures that might be appropriate to apply on the properties to make them more energy efficient.One of the measures discussed, the vent whose primary purpose is to create a good indoor environment for the residents but is also where the most energy is lost.Another measure discussed is insulation of the building envelope on the estate to make it more energy efficient. To put extra insulation on the building envelope is important because of the large amount of energy that is lost through the walls, ceilings and floors.Future actions that may be implemented is individual billing of heating and hot water. This system has been used in European countries since the 70's and today the EU wants to increase the own individuals control over their electricity costs. This has led to a discussion whether to implement the system in Sweden or not.However, there are a number of equitable measures to be sorted out before the system can be used in any great scale.Finally, it is important to remember that environmental measures should be the primary and the pursuit of cost reductions the secondary otherwise you risk the environmental work to be counterproductive..

The aim of this report is to improve the fire safety at Hallsta Paper Mill in Hallstavik, Sweden. In order to do so large parts of a fire-protection management system for the paper mill has been created. The report begins with giving a general description of management structures and fire-protection management systems. An account is given for how management structures are designed, and how they should be implemented, maintained and updated. Thereafter follows a description of what routines and instructions should be included in a fire-protection management system..

This thesis aims to investigate what requirements companies have in order to achieve a successful legislative compliance control. The implementation of an environmental management system can help the company to structure their business and succeed with their environmental legislative compliance.Both small and medium sized businesses perceive that it is difficult and time consuming because the legislation can be difficult to interpret if you do not have the required knowledge. There are many companies that hire help in the form of consultants who audit their compliance, but this leads to a risk that the company will be exposed when the knowledge does not remain in the company if the consultant would cancel the cooperation. There are not so many tools today for businesses to obtain good legal compliance. The methods used are usually checklists included in the control program, and it costs a lot of resources to do everything needed.This study strives to deliver the expressed needs of the businesses.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

To reach an Ecological Sustainable Development, Sweden has established environmental quality objectives. Green spaces are attractive for exploitation and in Sweden the access to large jointly green spaces has decreased, which has impact on humans recreation and the biodiversity. The economic aspect has great impact on the planning process which gives indications that the environmental objective may collide with other sector goals within the municipality. The thesis overall aim is to see how the management by objectives for the green spaces implements and how the green spaces is handled in the planning process in a specific case. The thesis builds on a content analysis, strategic interviews and a case study.

The demand for environmental assessments on buildings and energy consumption is increasing as well as the energy performance requirements for buildings. At the same time it is increasingly common with self-producers of heat and electricity generation.The main purpose with this master thesis is to investigate how time resolution affects the environmental assessment of energy consumption in office buildings connected to district heating (DH). Environmental assessments were done with both attributional LCA and consequential LCA with system expansion.Fortum´s DH system in Stockholm was analyzed and district heating production was simulated in a Matlab-model. Greenhouse gas (GHG) emissions for the production were calculated. The heat demand of the office Gångaren 16 in Stockholm was simulated in IDA ICE.

In the construction industry today there is a significant technological revolution goingon. New methods for automated processes and information management are developedcontinuously. Intense studies are currently taking place to ensure ways and means toembrace the new technology of BIM.At the present, environmental certification systems are considered cumbersome andchallenging. However, the increasing demands of sustainable development in the constructionindustry imply that the environmental certifications will not disappear. ThisMaster Thesis examines the possibilities to apply BIM technology within the field ofenvironmental certifications to streamline the processes.The applications that provide the best opportunities are:- To use BIM to be able to, during the design stage, dynamically evaluate the resultor score a certain building will achieve.- To avoid unnecessary work through collection of data for calculations directlyfrom a BIM-model.- To be able to automate certain time consuming calculations that are currentlyperformed manually.- To automatically examine the completed model to ensure that the demands arefulfilled.The possibilities to use BIM within these areas are however limited by the technologyitself.

The purpose of this literature review was to describe the paths of exposure and accumulation of organic pollutants into the tissues of farm animals. Organic pollutants can be spread in the environment by air and rainwater. Farm animals can be exposed to these pollutants for example by eating soil or contaminated plants. Many of the pollutants can then accumulate in the fat tissues of the body because of their lipophilic character. Brominated flame retardants and perfluorolated compounds are both pollutants of current interest.

This report that is written in cooperation with Peab Sverige AB, studies the information and knowledge management from the production support to the production management. The conclusion of this report is that to have a good and functional information and knowledge management it is necessary that the company has a good way of regain and handling experiences from its projects. The way to do this is to develop the managing system on the production management?s terms. It is also critical to find an easy way for the production management to use the system..

Uppsatsen är baserad på en fallstudie gjord på Tetra Pak. Syftet med fallstudien var att utforma en lista med faktorer att som bör beaktas för att ett införande av ett Competence Management-system ska bli framgångsrikt. Tillvägagångssättet i fallstudien har varit en dokumentstudie och ett antal intervjuer. Använda teorier är hämtade från områdena Change Management, Knowledge Management, Competence Management och Human Resource Management. Undersökning resulterade i ett antal intressanta faktorer som bör beaktas.

This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

For the company to work well, it is necessary with a good economy, a high qualitative production and a well working system concerning the environment: the whole cycle on the farm needs to be working. At the same time, debaters about the environmental impacts are also requiring higher demands for the dairy farmers and therefore also the management programs. Management programs for feed evaluation calculations have been more developed over the years. Big amounts have been invested in the new feeding system with NorFor, but no one seems to have asked the dairy farmers what they themselves want to spend their money on, and what they need help with. For the dairy farmers it is necessary that the whole company is controlled in the right way, and much more than just feed evaluation is included in this.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.