Wind power is an energy source that is becoming increasingly popular in Sweden and around the world. The establishment of large wind farms supply and contributes to energy production within grid in search of a more sustainable energy production. Wind power is becoming more popular and opens up new areas of implementation. More cities are starting to use small-scale urban wind power, everything from full-scale work for a little less work adapted to the villas. Sweden has high goals regarding the production of green electricity and the work which deals with the conditions Sweden plays in achieving those goals.

Abstract The IT- business is a fast growing business trade. This expansive line of business continuously demands flexibility both economically and legally. It is, today, of great importance to have knowledge about your own trade especially when it comes to new agreements. Laws and regulations are seldom flexible and adaptable tools, this is due to the fact it takes time to create new laws and, above all, it takes time to create laws with the right effect. This is where standard agreements enter the scene.

BIOGAS POTENTIAL IN GRASSES FROM WETLANDSMarvin MartinsThe purpose of this study has been to survey wetlands that are suitable for mowing and to analyze the biogas potential in the harvested grasses. A preformed investigation showed that there are suitable wetlands, which can be harvestable, namely those mowed formerly in traditional haymaking. The practice of traditional haymaking is dying out in Sweden today but there are several good reasons why it should to be reconsidered. Nature- and cultural values are obvious, also the unutilized energy in the grass.The suitable types of wetland that were specifically studied were the productive wetlands; meadow marshes and wet meadows. These wetlands are represented in the Swedish meadow- and pasture inventory database; (TUVA) and the Swedish national wetland inventory (VMI).

The purpose of this thesis is to investigate the possibility to make small, cheap and ultra low power sensor platforms, connected in wireless networks for monitoring of home and industrial environments. The concept is based on ideas from our supervisor, Jerry Lindblom. The developed system consists of a generic platform for different sensors, a receiver and software. A GPRS module from RO Rollytech AB and a database from Gema Industri AB have been modified and used to demonstrate an example of a complete system. To the platform, it is possible to connect any resistive sensor and any sensor that can act as a switch.

Background: Evaluation of lameness in horses is traditionally performed by a veterinarian who subjectively evaluates the movements of the horse. Accordingly, lameness diagnosis varies with the veterinarian and circumstances for which the horse is examined. Research within the area has long tried to establish an objective and standardized method for lamenessevaluation in horses. Several methods have been shown to be reliable and are used regularly within research, for example measurement of forces between the hoof and ground, and measurement of movements with high speed cameras or accelerometers. However these methods require considerable preparation, standardization, and expensive equipment as well as produce large amounts of data that are incomprehensible for the clinician.

The purpose of this thesis is to investigate the degree of influence of holes in the web of steel beams with long spanson weakening of their bearing capacity. Making holes in the web of the beam generally reduces the bearing capacity of the beam. However, it might be necessary seen from both an architectural perspective as well as from a building services perspective by creating an opportunity for building installations.The objective of this thesis is to examine how much an I-beam can be weakened without sacrificing safety and functionality. The investigation has been done by using Finite Element Method through commercial software.The regulation for structural design of building structures in Sweden used to be specified in the document known as BKR. But this was replaced by the European norm Eurocode back in May 2011.

Glass has sophisticated front properties and are used as facades in high buildings. During cold periods, these glass facades could cause thermal discomfort, due to cold downdraught. Cold downdraught can be countered by placing heaters under glass surfaces. Nowadays technology offers highly insulating windows, which is why there is an interest to investigate the indoor climate with only underfloor heating. The research in this area is limited, and few empirical methods are available.

Bakgrunden till rapporten var att det företag som medverkat i studien ville utveckla ett grundmönster för damkappor. Syftet med arbetet blev därför att utarbeta ett grundmönster med två ärmtyper som graderas mellan storlek 32-50, samt konstruera en kappmodell från samma grund. Utöver detta skulle även detaljkonstruktioner och specifikationer utformas. Frågeställningarna som styrde arbetet kretsade därför kring hur man på bästa sätt tar fram detta.All konstruktion utfördes i Lectra´s Modaris. För att ta fram grundmönstret jämfördes två arbetssätt för att sedan välja en av de grunder som konstruerats.

CASE är en förkortning för Computer Aided Software Engineering. Syftet med CASE-verktyg är att öka produktiviteten för dem som utvecklar mjukvarusystem genom att datorisera processer i deras arbete.Det finns dock problem med CASE-verktyg. Tidigare forskning pekar på att dessa ofta är komplexa i sitt utförande, att de lätt ifrågasätts om de visar sig ha buggar och att inlärnings-tröskeln är ofta hög till följd av den höga komplexiteten. Man frågar sig också hur komponenter ska vara utformade i verktygen för att fler ska använda dem. Vidare saknas nyare undersökningar med fokusering på användbarhet för CASE-verktyg och framförallt där man utgår från användaren.Vad gäller CASE-verktyg har det skett en del begreppsbyten inom området.

This report examines the industrialization of a newly developed household machine on behalf of Technogarden Engineering Resources in Karlstad, Sweden. The report is a part of the final course in the Bachelor Program in Mechanical Engineering at Karlstad University and takes place in spring 2014.An innovator, an investor and a engineering consultant firm have through collaboration developed a new type of gruel machine. The product is in its final stage of construction and is planned to be manufactured in a production located in Sweden, autumn of 2014.To compete against today?s trend in outsourcing manufacturing to low cost countries for better profitability, the industrialization of the gruel machine must be done with a minimum amount of resources in order to become successful, which also describes the problem of this study. Using pre-study material in form of Lean production literature, visiting a successful production site and gathering data from involved engineers a specification was developed which describes what this industrialization must achieve and which requests can be accomplished.

Dagens teknik har bidragit till att mobiltelefonens användningsområden har expanderat avsevärt de senaste åren. Detta har lett till att alltfler mobila tjänster har dykt upp på marknaden. Uppgiften i detta examensarbete består i att utveckla en version anpassad för mobiltelefoner av den existerande produkten TelMe, som är en webbtjänst för vikarietillsättning inom olika verksamheter. Den mobilanpassade versionen kommer att gå under namnet TelMe Mobile. Problemställningen var att implementera de väsentliga funktionerna i produkten med avsikt för att göra dessa tillgängliga för mobiltelefoner.

The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest.Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage.

This report is the result of an investigation of the possibility to use RFID-technology in a producing company. The investigation is focused on a flow between the company?s producing subsidiary company in Lithuania and its main facility in Sweden.RFID is the abbreviation for radiofrequency identification. The RFID-technology forms the base of a system with wireless information transmission between an object to which a transponder, also called tag, has been attached and a reader. The information is transmitted by radio waves and the system is equipped with software that can digitalise the radio waves.

Sammanfattning Systemutveckling är ett av de områden som snabbt har etablerat sig på marknaden. Trots detta faktum har inte själva utvecklingsprocessen förändrats nämnvärt under åren som gått. Samma problem som fanns beskrivet i böcker från början av 90-talet cirkulerar fortfarande inom detta område. Många av de problem som uppstår inom systemutveckling kan leda till system som inte fungerar på rätt sätt. Det kan även leda till högre kostnader och missnöjda kunder som i sin tur leder till lägre inkomster.

Ett av de mest omtalade fenomenen de senaste åren har varit den snabba utvecklingen av digitala medier och sociala nätverk. Teknologin har utvecklats från att ha varit något som användes ibland och var till för arbete och underhållning, till att vara en stor del av livet och för vissa en nödvändighet. De nya medierna och sociala nätverken är idag en stor del av mångas vardag och påverkar hur vi tar in information, kommunicerar och utrycker våra tankar och idéer. Under de senaste åren har allt fler organisationer valt att ta in sociala medier i sin marknadsföringsstrategi och organisationerna har företagsprofiler på bland annat Facebook och YouTube för att kommunicera med kunderna. Yngre generationer har växt upp med tekniken och sociala medier vilket är en resa som äldre inte har följt med på och därför är en vanlig uppfattning idag att endast yngre generationer använder sig av de nya mediekanalerna.