Sekretessbelagd.

The project deals with the evaluation and testing of speaker and microphone elements as well as microphone cavity.The first part of the report comprises a comprehensive theoretical part about drivers, microphone elements, and to some extent microphone cavity.The goal was to , on the behalf of the company Limes Audio AB, develop proposals on microphone element and cavity as well as drivers for a speakerphone application, based on specific factors. The main factors were performance, price and form factor.The aim was to create the best possible conditions for Limes Audio's software developers to implement the company's audio-enhancing software, mainly adaptive echo cancellation.The testing was carried out using Adobe Audition and MatLab. The test methods were developed in conjunction with Limes Audio and are described below.The project will result in suggestions for a speaker, a microphone and a cavity. The cavity were removed from the product because the results indicated that the cavity matter little for the end result.The report concludes with a discussion on how the measurements could have been enhanced to simplify the interpretation of the results and making the testing more efficient..

There are several methods and models within the areas of software engineering on how to proceed during a software development process. For each of these methods and models there are benefits and drawbacks, depending on how you choose to look at them. A difference of principle between the different models is that they either advocate iterative development or not. In parts of software engineering one makes use of different methods depending on which is most fitting in a specific situation. There are several methods on how to recieve more qualitative data from the end-users during the requirement collection, but the reappearing pattern is still user centric participation, which means that the user participates more actively in part of or the entire development process.

At Flight and Systems test Saab AB, a post-processing software is used to process GPS data. A new software by the name GrafNav has been purchased and the purpose of this master thesis therefore became, partly to make a judgment regarding GrafNav?s ability to estimate position, velocity and accuracy, partly to if needed improve the estimate and finally find one or several methods to estimate the position and velocity accuracy. The judgment of GrafNav was performed partly by a comparison to the former post-processing software (PNAV) and partly by a comparison to the airplane?s inertial navigation system (INS).

The legal situation of companies costs for investing in computer software in an income tax law perspective is described by a tax law guidance that generelly acount these costs according the principles of research and development. If there is any reason to classify the costs differently, it could mean that immediate deduction not will be allowed. For this reason it is important to establish what the legal situation would be in a more nuanced tax law classification. The tax law categories that will be analysed in the thesis are research and development, inventories, intangible assets, stocks and ongoing projects. The purpose of this thesis is mainly to give examples of what such an income tax law classification can look like.While dealing with the problems of classifying the costs some situations of competition will occure.

Today there are a big need for a system that delivers overview of all available units for different municipalities and shipping- and security companies due to the increasing requirements for efficiency. The purpose with this graduation thesis is to find out which systems that is suitable to use while developing cost-effective software for positioning and to produce a prototype for such solution.This assignment has been done at the request of PocketMobile Communications AB. PocketMobile is a company that are specialized on delivering modern mobile software solutions and systems to companies with their own vehicle fleet or mobile workers.This master thesis can be split into two separate parts, the theoretic- and the practical part.The theoretic part includes producing a number of functional requirements in cooperation with PocketMobile and comparing the available systems against the function requirements.The practical part deal with the development of a prototype that demonstrates the software recommended. The development tools that best matched the functionality requirements when the selection was made in May 2007 were Map24 and OpenLayers. The system that was selected to use while developing the prototype was Map24, because this product matches all of the requirements and it is also suited for professional usage regarding support, scalability and reliability.

As changes occur more frequently in IT- and software development, it is important for the companies to meet the demands and needs of its customer. The companies have to be able to adapt themselves continuously in order till fulfill its customers changing needs in an effective way, which results in big changes of the companies? structures. The more traditional way of working is often replaced with more alternative approaches as a response to the reputable deficiencies of its predecessors. As an effect of the rapid change and development some companies now see big potential in switching to more Agile and flexible methods and some companies have no choice but to change their way of working.

Webbaserat Tidrapporteringsystem.

This diploma work has been conducted for the consulting company Ramböll inUppsala, Sweden with the purpose to perform a study with the calculation programFEM Design 9.0 made by Strusoft. The aim has been to find out if it is possible to gainadvantage by utilizing more advanced 3D software for design calculations, instead ofthe traditional methods currently used in construction works.The method of approach has been to model an existing warehouse building with theprogram FEM Design, and then compare the results with those attained with FrameAnalysis and hand calculations. These results are then analyzed. An evaluation is maderegarding to what benefits can be achieved using a more advanced 3D-model.The results of the study show that the differences between the methods are not ofany significance with regard to the design of the steel frame. However in morecomplex materials such as reinforced concrete, the differences become more notable.The conclusions drawn by the authors of this study into FEM Design are that theeducation requirements of the program are higher than for simpler programs, whosepurpose are solving predetermined problems.

The Swedish field of digital X-ray imaging has since several years relied heavily on distributed information systems and digital storage containers. To ensure accurate and safe radiological reporting, Swedish software-firm eCare AB delivers a system called Feedback?the first and only quality assurance IT support product of its kind. This thesis covers several aspects of the design and implementation of future versions of this software platform. The focus lies on distributed directory services and models for secure and robust data propagation in TCP/IP networks.

In order to facilitate design and maintenance of such a large and complex site as a nuclear power plant, all system functions must be described in a stringent way. In the past, these descriptions consisted of text documents and logical diagrams, but today there are an increasing number of object-oriented programs available on the market which might be used for this purpose. This Master Thesis has made a closer study of one of these programs named Rational Rose. The principal of the program is to facilitate software design and development, not to create models of plants. However, using the program the same way as developing software, specifying actors then gradually extend the model with use cases, use cases diagrams etc, the same methods can be used when modelling plants.

Studien avser att beskriva om och hur faktorernakärnkompetens, osäkerhet, nyttoaspekter och kontroll/flexibilitet påverkat besluten vid inköp av cloud-tjänsten SaaS. Uppsatsen är en kvalitativ studie som är baserad på semistruktuerade intervjuer med nyckelpersoner på två små IT-företag samt vetenskapliga artiklar och litteratur inom ämnesområdet. Studiens slutsats är att de båda företagen påverkats av några eller alla faktorer vid inköpen av cloud-tjänsten. Faktorn nyttoaspekter påverkade båda företagens inköpsbeslut i hög grad. Faktorerna osäkerhet och kontroll/flexibilitet påverkade inte alls inköpsbeslutet hos det ena företaget medan de till stor del påverkade inköpsbeslutet hos det andra företaget. Faktorn kärnverksamhet påverkade det ena företagets inköpsbeslut till en viss del och det andra företaget till en stor del..

”Fan fiction writing”, or the writing of stories based upon a popular entertainment franchise, has become a topic of academic discussion. Fan fiction writers have waked the ire of movie producers, since they often write fiction that is in direct contradiction to the movie’s plot or spirit. While most academic studies on fan fiction have concentrated on his confrontational aspect of the writers’ psyches, we have found that the writers actually have a much more nuanced approach to their work, and are not necessarily hostile towards the directors and producers. Even more surprising is the fact that the internet, beyond giving the writers a forum to post their writings, has potentially had a transformative impact on how the writers interact with each other and with the outside world. .

Rising complexity in the development of real-time systems has made it crucial to have reusable components and a more flexible way of configuring these components into a coherent system. Aspect-oriented system development (AOSD) is a technique that allows one to put a system?s crosscutting concerns into"modules"that are called aspects. Applying AOSD in real-time and embedded system development one can expect reductions in the complexity of the system design and development. A problem with AOSD in its current form is that it does not support predictability in the time domain.

Sveriges Radio stores their data in large archives which makes it hard to retrieve specific information. The sheer size of the archives makes retrieving information about a specific event difficult and causes a big problem. To solve this problem a more consistent use of metadata is needed. This resulted in an investigation about metadata and keyword genera-tion.The appointed task was to automatically generate keywords from transcribed radio shows. This included an investigation of which systems and algorithms that can be used to generate keywords, based on previous works.