Scandinavian Biogas is involved in the planning of a combined ethanol and biogas factory in Karlskoga, Sweden. Besides biogas and ethanol large amounts of digester residues will be produced, about 450 000 liquid tonnes residue (~7,3 % Dry Substance( DS)). The objective of this thesis was to investigate possible uses of the residue from the biogas production process ScandgasEthanol developed by Scandinavian Biogas, and to derive a methodological approach how to evaluate and compare handling systems. Three systems where proposed and compared in this thesis; spreading of the untreated residue as fertilizer (system 1), dewatering to a higher DS content to reduce transportation before spreading as fertilizer (system 2) and production of a solid fuel by dewatering and drying the residue (system 3). The general conditions for the proposed systems were investigated in terms of practical viability, economical aspects, environmental impact and energy inputs/outputs.

Hammarkullen tillkom under slutet av 1960- talet och början av 1970. Området har formats av den tidens ideal med breda vägar och uppdelade funktioner. I Hammarkullen har få förändringar och förbättringar gjorts sedan det blev till. Genom att studera området, hur det ser ut idag, kvaliteter och brister, samt genom analyser har jag valt att främst fokuserat mitt arbete på: ? komplettering av bebyggelse ? utveckling av den yttre miljön ? utveckling av torget Huvuddelen i mitt examensarbete ligger i planförslaget.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

Test bench for air bearingsThis thesis work consisted of bringing forward and defining the test parameters relevant for a test bench and constructing a test bench that can test and verify the largest existing air bearings that are of use in Micronic Laser Systems AB machines. Because the knowledge about air bearings is limited it is thought that with the help of the test bench the knowledge would increase and in that way improve the air bearings.After learning more about air bearings and their purpose at Micronic Laser Systems AB, I started the concept phase for the test bench. For each part in the test bench I consulted my two tutors, Torbjörn Hedevärn and Johan Bergqvist, at Micronic Laser Systems AB. The final concepts where documented as 3D-modells in Solidworks and some of them have been tested in Solidworks FEM-program.The test bench is designed so that, with the help of a pneumatic cylinder, 25 kilo weights are placed on the air bearing to test its stiffness, damping and the pressure performance under its surface area. To test these parameters the test bench has to have a pressure meter, accelerometer and a microcator.

Ett samhälle där en hög andel av transporterna sker på cykel har många fördelar för miljön, hälsan och ekonomin. Inom staden har cykeln även fördelen att den tar lite utrymme i anspråk och kan bidra till en attraktivare stadsmiljö. Syftet med detta arbete är att presentera åtgärder som ger förutsättning för en ökad och säker cykeltrafik. Baserat på svenska och utländska riktlinjer samt exempel från städer med en hög cykelandel ges en överblick över olika sätt att främja cykling i staden. Det handlar om att inkludera cykelplanering i övriga stadsplaneprocesser, att skapa strategier för stadens utveckling av cykling, att satsa på fysisk infrastruktur anpassad efter cyklisters behov och att informera och följa upp de mål som sätts.

This paper treats the differences in terms of insurance between optional and compulsory third party liability insurances. It also treats the purpose of the compulsory third party liability insurances and their accordance with that purpose. The primary purpose of the optional third party liability insurance is to ensure the policyholder financial resources to cover possible claims for damages. The primary purpose of the compulsory third party liability insurance is to render possible the compensation of a third party for damage done. The policyholders financial ability to pay damages is of subordinate interest, and the purpose of compulsory third party liability insurances is thus twofold.

The aim of this study is to investigate which management control mechanisms evolve in companies that receive funding from Venture Capital companies and why the management control systems evolve in the way that they do. A case study was performed on three Swedish high technology companies, that all received funding from Venture Capital companies for the first time in 2006. Merchant?s framework, defining all management control mechanisms as either, results control, action control or personnel control, was used to structure the study. Results show that the companies that received Venture Capital all increased the use of management control mechanisms within results control, action control and personnel control.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

I planeringssammanhang är det vanligt att tala om en attraktiv stad, men begreppet är svårdefinierat. Dels därför att det är starkt kopplat till individens egna värderingar, men också därför att begreppet består av många faktorer. Det är därför praktiskt omöjligt att utforma en attraktiv stad om inte begreppet attraktiv stad definieras. Det finns många teoretiker som forskat inom området, genom olika tidsepoker och med olika infallsvinklar. Trots den allomfattande forskningen finns det idag ingen enskild teori eller definition på vad som utgör en attraktiv stad. Examensarbetet har lett fram till en undersökning av begreppet attraktiv stad, som sedermera lett fram till olika faktorer och beståndsdelar som bygger upp definitionen attraktiv stad.

This study aims to investigate how small scale manufacturing companies reason around an implementation of a PLM-system, as well as the suitability of these systems compared to larger companies. The study is built on a qualitative method. Initially, secondary data was gathered through books, articles and reports. Primary data was gathered through four interviews. Two interviews were performed with PLM resellers, one interview was performed with a PLM developer, and one interview was performed with a small scale manufacturing company that opted to not implement a PLM-system.The results imply that overall differences between larger and smaller companies exist in regard to the need of PLM systems.

Begreppet hållbar utveckling har växt fram kring orsaker och lösningar för globala försörjnings- och deponeringskriser. Begreppet är mycket brett och diskuteras runt om i världen. Diskussionen om hur samhället ska uppnå en hållbar utveckling har påverkat fysisk planering och trafikplanering. Grunden till en hållbar utveckling ligger i en samordnad och miljöanpassad bebyggele- och trafikplanering. Det är bland annat viktigt att det finns förutsättningar för en effektiv och miljöanpassad kollektivtrafik och ett effektivt gång- och cykeltrafiknät.

This paper describes the development of a simulation model for the ambulance flow in the Västra Götalands-region of Sweden, and an analysis tool for the output of the simulation model. The aim of the simulation model was to be able to evaluate the outcome from changes in the ambulance operations, such as a reorganization of ambulances or an increase in intensity of the ambulance calls. This evaluation is meant to serve as decision support for the strategic planning of the ambulance operations. The analysis tool was developed to visualize the abundant geographical data produced by the simulation model in a meaningful way. The simulation model was validated against historical data which showed that the dispatch time for the highest prioritized ambulance calls corresponds well with historical data.

Detta examensarbete på kandidatnivå i Fysisk Planering på Blekinge Tekniska Högskola är en studie av översiktsplanering över kustzonen. Syftet med uppsatsen att identifiera svårigheter och möjligheter med kustzonsplanering inom översiktsplaneringen genom att utifrån teorin analysera hur ett antal valda kommuner arbetar med kustzonsplaneringen och dess frågor i respektive översiktsplan med utgångspunkt i frågeställningen som lyder följande: ? Hur behandlas kustzonsplanering i översiktsplaneringen hos kommunerna? ? På vilket sätt tillvaratas relevanta miljömål, riksintressen och lagstiftning i kommunernas kustzonsplanering enligt översiktsplanerna? ? Vilka planeringsfrågor hanteras på översiktlig nivå inom kustzonsplanering? Fallstudien består av en analys av Blekinge Läns fyra kustkommuner Karlskrona kommun, Ronneby kommun, Karlshamns kommun och Sölvesborgs kommun. Analysen utgår från forskningsfrågorna. För att få en bakgrund och ett stöd till fallstudien har ett teorikapitel utarbetats.

Sveaverken is a company who manufactures products and equipment for the modern farm enterprise within grain, pork and horse businesses. A large share of Sveaverken's turnover depends on the role as a subcontractor for Delaval within the areas ventilation, manure handling and feeding systems. Sveaverken wants to investigate the possibility to increase sales by establishing new sales channels, for example e-commerce This thesis is an analysis of the Swedish farmers use of internet, attitudes towards e-commerce and Sveaverken's interest within this area. There is also a minor economic analysis of the cost of establishing the e-commerce site. The study focuses on farmers who are potential customers to Sveaverken within Sweden. To examine the farmers opinions about internet and e-commerce a questionnaire was developed and sent out in November 2006, to 500 farmers of which 45% answered. The results show that the average age of the farmers was 42,5 years.

Today most ice rinks in Sweden use secondary refrigeration systems with a solution of calcium chloride and water as secondary refrigerant. Due to the large amount of energy such a system uses more efficient systems would be desired.An earlier study concluded in the possibilities of using carbon dioxide as secondary refrigerant with copper tubes as the loops in the ice rink. Since then 3 ice rink refrigeration systems has been built with carbon dioxide in copper tubes. Excluding the ones being direct involved in those projects there is still very little knowledge about how these system works. This study has been made primarily with the aim of adding to the knowledge concerning availability and cost and secondary to look at possibilities for improvement.A comparison between systems with carbon dioxide, calcium chloride respective ammonium solved in water has been made by using Decision Matrix.