The aim of this study was to, using previously collected data from self-declared antisocial behaviour questionnaires, examine if the crime frequency has been different between adolescents that have either been referred to two different forms of open care in social service, child and youth psychiatric inpatient care or have been sent to Homes for Specialised Supervision. The criminality frequency and the most common crimes committed were compared between the study groups and further between genders in each particular study group. Statistical significance testing was used and the results of the survey revealed that juvenile delinquents that had committed severe criminal acts were represented in all four groups. The study group with adolescents in national care was the most different from other groups. These youths seemed to have had a lower crime frequency than the other groups with the exception assault and robbery.

The thesis was performed at Forsmarks Kraftgrupp AB in the department ofmechanical engineering, FTCM. Forsmark nuclear power plant has had problems with cracks in some of the controlrods which are placed in the reactor at Forsmark 3. To investigate the cause of this,material samples were taken from five of the damaged control rods. This sampling ofthe rods resulted too short rods to be transported in the shipping container to theinterim storage facility for used nuclear fuel in Oskarshamn. Control rods are crucial components in a nuclear reactor, regulating the reactoreffect by blocking or unblocking fuel rods. Control rods which have been in thereactor are always handled under water in order to protect against the radiation theyemit. The task was to design a control rod adapter that extends the control rod sotransport can be performed from Forsmark. The goal of the work was a complete setof blueprints so the control rod adapter can be manufactured and mounted on theshort control rods and then be transported to the interim storage facility. The work began with mapping of how control rods normally being handled from thereactor to the interim storage facility.

BAE Systems Hägglunds has a long history of producing high performance terrain tracked vehicles (mostly for military applications), and they are now aiming at developing a tracked forwarder with similar techniques.The forwarder will be of series hybrid type where a diesel engine via a generator will power the motors (one for each drive wheel). Thanks to individually controlled motors and the gentle rubber tracks, this forwarder is calculated to have a considerably higher average speed in the terrain and to be more gentle to the soil. The forwarder with a weight of 11 metric tons and a load capacity of 15 metric tons is specified to have an average working speed of 7-10 km/h, a top speed in terrain of 15 km/h and a top speed on roads of 40 km/h.This master?s thesis aims at developing a conceptual design of the forwarder?s drive module which includes electric motor, gear unit, brake and drive wheel.To investigate if the requirements can be fulfilled a study of the dimensioning loading scenarios has been carried out. The resulting needs regarding the torque has been considered in order to determine the required gear ratios for different motor options.

Flamskyddande kemikalier används idag inom en hel del olika områden. Ett stort område är textil, där hemtextil är dominerande. Det finns en mängd olika typer av flamskydd på marknaden. Alla har till uppgift att sakta ner brandförloppet eller helt förhindra att en brand uppstår. De halogenerade flamskydden är de mest effektiva men har många kopplingar till miljöproblem.

Question:"Does the market possess perfect information as the efficient market hypothesis says?""Is there any significant relationship between the abnormal stock return on the ex ? day and the dividend?" Purpose: The purpose of this study is to enlighten and find understanding about stock return versus dividend on the ex ? day and try to figure out if abnormal returns occur on the portfolio during dividends.Methodology:The study was based in a quantitative nature and was derived with an event study and a hypothesis testing. The authors investigated the thirty most traded shares on the Stockholm stock exchange during a period of five years (2005 ? 2009). They were analyzed during a total of nine days; the estimation window was set to sixty days.

There is no standardized test to control the appropriate physical ability in the Swedish ambulance service. The county in question does not perform annual physical tests. A project has been going to develop science-based physical tests, designed for the ambulance service. The research has resulted in the Aasa-test.Objective: The aims of this study were to examine the ambulance staff perception of the Aasa-test relevance, introduction of annual tests and the importance of their own physical training in relation to ambulance work.Method: A quasi-experimental study with a comparative design has been conducted. Aasa-tests were conducted in 41 randomly selected staff at an ambulance station in central Sweden.

In view of the difficulty of recruiting staff to care profession and in terms of the increasing need to find ways of ensuring a good language level in the profession, have an interest in language tests been revealed. The purpose of this paper is therefore to highlight the use of language tests for admission to the care courses for adults in Värmland. What provided This is a survey of the prevalence and an examination of the validity of the test. The issue that this study assumed is: How is language test in connection with admission to the certified health and social care courses for adults in Värmland? How well correlates intent of the use of the language test with the test's validity and reliability?The methods used to seek answers to these questions has been a combination of questionnaires and experiments.

The consultancy firm Knowit sought a smartphone application for communication between schools and pupils. Together with the students, it was decided to create the app both for Android and for iPhone. The project would produce a prototype app with limited functionality usable as a proof-of-concept in communication with potential customers.The questions that have characterized the work are; what features would be demanded in a school app, how to program user-friendly functionality and how to use object-orientation to design such an app. A question has also mentioned the differences between development for iOS and Android. The work was done in an iterative process in which the students worked together with planning, programming and testing.

Larvae of Lepidopteran Manduca sexta and Spodoptera littoralis are pests of economical importance in several horticultural and agricultural crops. Knowledge of insect feeding preferences and behavior is crucial in order to find economically and ecologically sustainable solutions to the problems caused by these herbivores. The aim of this thesis was to study the behavior and the induced feeding preferences in larvae of M. sexta and S. littoralis when reared on certain host plants. The hypothesis was that larvae of M. sexta would have an innate preference for plants of the Solanaceae family and therefore discriminate the previously experienced nonhost when faced with the choice between a true host and the previous food source.

The work thesis was performed at Assalub a company which is situated in Åtvidaberg. The company works with developing, manufacturing and marketing equipment for handling of lubricants for light and heavier industry. The work thesis it is based on a inquiry Assalub got from MacGregor which is a company within cargo solution, from port to offshore system.For unloading grain and other material from the ship cargo it is used combined inlet feeder and screw conveyor, there the inlet feeder is drilling down through the cargo and feed the screw conveyer with material to further destination. At the bottom of the screw conveyer and the inlet feeder there is a bearing that keep the parts together. However the lubrication of the bearing must be made manually.

This thesis investigates how recipient countries' domestic type of democracy affects its inclusive ownership in international development cooperation. This is done by examining Swedish development cooperation with Rwanda and Tanzania during the period from 2010 to 2014, a time when ownership - a concept which emphasizes recipient countries' leadership over its own development - was a central part of the international development agenda. The two cases were selected through a most similar case design where the value of potential explanatory variables was similar, except for the recipient countries' types of democracy. Furthermore, the case study uses a comparative analysis to analyze strategies and reports done by SIDA and the Swedish Ministry of Foreign Affairs. Previous research focuses on the exclusion that national ownership can result in, in undemocratic national contexts. The main argument for this should be seen as the fact that ownership can not be representative if the power of the recipient's development agenda is limited to a decision-making elite.

So- called ?Network Based Defense? (NBD) was introduced in Sweden in connection with the transformation of the Swedish Armed Forces in 1999. NBD is based on the U.S. variant Network Centric Warfare (NCW), which in turn is derived from research on the concept of Revolution in Military Affairs (RMA). In Sweden the concept was introduced and included not only the Armed Forces but was intended to also support the Swedish civilian agencies in order to create networks and hence share the available information and thus more effective crisis management and to provide more "bang for the buck." In developing the concept of NBD the Swedish Armed Forces used both economic and human resources, in the form of research, new technologies, new organization and new methods.Between year 2004 and 2006 the Armed Forces once again entered the process of reorganization.

This project has as main goal to study the influence of the coating thickness, deposited by arc-PVD- technology, on the wear resistance of coated cemented carbide inserts in three different turning operations. An additional effort has also been made to develop a new test method for evaluating flank wear resistance. Three different coating types (Coating A, Coating B and Coating C) have been studied in three distinctive thicknesses (2, 4 and 6 µm) for each type. For two of the coating types (Coating A and B) special studies has been done with the thickest coating, creating two additional coating versions of the thickest coating, by changing various deposition parameters, with the aim to enhance the cohesive properties of the coating and lower the residual stresses at the cutting edge. The results show increased crater wear resistance with increased coating thickness for all coating types, but the amount of increase changes with coating type (Coating A>B>C).

In view of the difficulty of recruiting staff to care profession and in terms of the increasing need to find ways of ensuring a good language level in the profession, have an interest in language tests been revealed. The purpose of this paper is therefore to highlight the use of language tests for admission to the care courses for adults in Värmland. What provided This is a survey of the prevalence and an examination of the validity of the test. The issue that this study assumed is: How is language test in connection with admission to the certified health and social care courses for adults in Värmland? How well correlates intent of the use of the language test with the test's validity and reliability?The methods used to seek answers to these questions has been a combination of questionnaires and experiments.

Thiswork is about the parents ' perception of their children's schooling and schoolsituation. It also addresses the important and fundamental conditions when itcomes to parenting and caring of children, which is an essential andcontributory basis for children's school situation. The work also deals withthe importance of good cooperation between school and home for the children tocome to the school grounds and with the desire to learn and develop. The aim ofthis work is that through a survey get a picture of how parents feel abouttheir child's school situation. But also look at how important interplaybetween school, parents and children to the school situation to be good.