Today all buildings contain some form of home automation. It might be heating controlled by athermostat or motion detectors controlling outdoor lighting.This paper,The Intelligent House, deals with the planning of a house in Kiruna, in the north ofSweden and further immerses itself in home automation or intelligent control in single-familyhomes. The house has been entirely planned, from layout to structural design and plumbing.The purpose of the paper has been to investigate the possibilities in home automation in singlefamilyhomes and to choose a suitable home automation system for the house being planned.The system has been designed and the costs and energy savings have been calculated.The system chosen for the house is called KNX and is the largest system for home automation inSweden. It is used to control heating, ventilation, lighting and alarm systems in the house. Is hasbeen found that KNX is very expensive and that the amount of energy, possible to save in thehouse, using the system, is relatively small.

Genom att studera olika kommunikationsprotokoll kunna svara på vad det är som gör att ett visst protokoll är bäst anpassat för att användas mellan mobila enheter och IoT-enheter.I arbetet användes en kvalitativ litteraturstudie för att ge en grundlig teoretisk bakgrund samt en experimentell studie där ett par teorier undersökts ifall de stämmer med resultaten ifrån verkligheten. De fem faktorerna kompatibilitet, batteritid, frekvens, räckvidd och tillförlitlighet undersöktes hos kommunikationsprotokollen Bluetooth Low Energy (BLE), Närfältskommunikation (NFC) och Wi-Fi. Dessa tre valdes eftersom de stöds av nyare mobila plattformar idag. Kommunikations-protokollen analyserades sedan gentemot olika användningsområden inom IoT, eftersom påståendet vad som är bäst anpassat beror på vad situationen kräver för egenskaper.En systemutvecklare som ska välja kommunikationsprotokoll till en IoT-tillämpning och läser denna rapport bör själv jämföra de olika protokollen mot varandra inom de fem faktorerna för att kunna avgöra vilket protokoll som passar bäst inom dennes situation. I arbetet utfördes endast experimentella studier på BLE på grund av begränsningar inom utrustningen.

Background: Low Price-Earnings ratio, low Book-to market ratio and low stock prices can give the impression that a stock is ?cheap?. Is it through systematic use of these portfolio strategies possible to beat the market index ? in other words does financial illusions exist? Purpose: To examine if the Stockholm Stock Exchange is an efficient market. Limitations: The efficiency is tested solely through the chosen portfolio strategies: low Price-Earnings ratio, low Book-to-market ratio and low stock prices.

In this paper we have theoretically built a house designed for people with impaired mobility. Theessay begins with an introduction in which the purpose of the work, the methodology and thedepth-research part is presented. Then the layout that explains how we intend to adapt the housefor the demands detailed in the depth-research part is presented. In the same chapter variousstructural components, such as different floors and walls, are specified.In the selection of materials we have taken into account the criteria of our specialization andadaptation to the aesthetic aspects, where we evaluate materials based upon our wishes regardingtechnique and form. There are also other aspects that are important in the selection of materials,including that these are adapted to technical traits of the construction elements and installations.In a later chapter the technical installations such as ventilation systems, heating systems,electricity and sanitation are presented, where both technical and financial aspects are describedin detail.

Constantly growing demands from the costumers in the Automotive industry forces the subcontractors to seek alternative ways to compete. One parameter of quality is the components tolerance against NVH(Noise, Vibraion & Harshness) aspects. Kongsbergs Automotive has developed a new gear shifter platform (Shift-by-Wire) that is sold to Alfa Romeo and used in of their car models. However, the company is not pleased with the components sound quality, therefore the main purpose of this thesis is to develope a number of concepts that is supposed to enhance these NVH-aspects.To get an understanding of the problem an analysis of the causes of the emitted sound has been done parallell to a product decomposition, function decomposition and a Ishikawa-diagram. Together with these methods has a litterature study been performed to get familiar with the physics of an impact and especially the emittment of noise.

Considering that the current technology is constantly improving, it becomes increasingly important to have an efficient logistics in a company to maintain profitability while achieving a competitive business. Efficient logistics may be accomplished by improving the internal materials handling. In this thesis the internal material handling of steel frames has been studied at a factory in Vaggeryd. The goal of this study is to investigate the problems that exist with the current production flow of products and provide suggestions on how it can be developed to reduce unnecessary handling and movement.The study has a deductive approach where the authors has been using literature studies parallel with empirical analyzes conducted at a company to achieve the purpose of the study. Documentation from the company and interviews with staff and observations form the basis for the data collection carried out.

In this thesis, the Train Power System Simulator (TPSS) has been compared and verified with the commercial simulator TracFeed® Simulation (TracFeed). The basis for the comparison was a given part of the Swedish railway system, with steel transportation trains. Primarily, emphasis was placed on running time and energy consumption in simulation results. Two transformer systems were analyzed, booster and auto transformers. The high voltage transmission line, parallel to the railroad track, was disconnected in some simulations.

The purpose of this thesis is to describe what Building Information Modeling, BIM, could mean for landscape architects, and also hopefully to make sense of the possibilities and problems of the system. BIM is about virtual design and is based on all consultancy groups in the design team modeling in 3D. Intelligent objects and metadata, such as price and material, are used. The project group has a common interchange format for simple sharing of information. To get an idea of how the situation with BIM for landscape architects looks like today, I collected information mostly through interviews.

The guest harbor on Utö, Utö Gästhamn, is currently using electricity for heating all of the water used in the showers and taps. Because of the large amount of visitors, especially during the summer months, the hot water usage gets very high and that is also the case for the electrical bills. During the year of 2011 the cost of electricity for Utö Gästhamn reached a total of 257 500 kr. Out of these 257 500 kr approximately 142 000 kr, 55 % of the total cost, were because of the water heating.The report is the result of a cooperation with Skärgårdsstiftelsen, the Green Islands-project and Utö Gästhamn where the mutual goal is to dimension a solar energy system, to promote the sustainable development.Initially the different techniques for the solar energy system are researched. The techniques are plane solar collectors, evacuated tube collectors, pool collectors and photovoltaic cells.

This bachelor thesis addresses the problem of appeals against house building in Gothenburg. The thesis investigates whether there is a statistically significant relationship between demographic factors and the occurrence of approved, appealed and revoked permits for new construction of residential buildings in the ten districts of Gothenburg. This is done with a correlation analysis. The report also investigates whether there is a statistically significant regression in the same demographic factors and how these individually affect the average processing time for appeals in the districts. This study is done with a multiple regression analysis.

This paper describes a method for wireless energy transfer via near-field electromagnetic inductionthat is inexpensive, simple and can be applied to almost any type of system, regardless of size andenergy demands.The method uses a primary unit consisting of an oscillator, amplifier and inductive coil thattransfers energy to a secondary unit consisting of a coil, rectifier and voltage regulator. Two typesof oscillators and several amplifier designs were realized and evaluated together with a multitudeof flat coils of both monofilar and bifilar type.The results show that it is important to use an oscillator whose frequency is dependent on theinductance of the connected transmission coil, such as the Colpitts oscillator. This is preferable toan oscillator with a preset frequency, such as a Schmitt-trigger oscillator..

The so called ?ByggaF-method? is a relatively new Swedish method to stop moisture from being built into a building. The method should prevent damages on buildings as a result of mould growth and moisture. The purpose of the method is to include moisture control in the entire constructionprocess, from the projecting phase and all the way to the management phase. Up until now, there is no proof if the method is profitable or not and no studies have been made on the topic.

The thesis aims to study how rainbows families are being treated by the authorities and the surroundings. It focuses on how homosexual parents are met in society. Although, homosexuals have the legal right to have a family and enter into marriage, the social norms are still far behind and rainbows families are seen as ?the others? and abnormal.  Earlier researches have been studding how the authorities still assumes that every family are living in a heterosexual family constellation. By this assumption they exclude families who are not living in a heterosexual family.

Det här är resultatet av ett examensarbete utfört vid Mälardalens högskola i samarbete med Iggesund Paperboard AB. Syftet med examensarbetet var att se om det är viktigt för ett företag att ha tillgången till en gästgård men även till hur de är utformade för att fungera för den typen av verksamhet.En gästgård kan ses vara viktig för ett företags representation. Gården används främst som ett tillvägagångssätt för att sälja företagets varor och tjänster men ger också en god möjlighet till att knyta starkare band mellan kunder såväl som mellan företagets egna arbetstagare.Anledningen till att det här examensarbetet utfördes var för att företaget såg det som ett behov att se över om dessa gästgårdar var värda att bevara och utveckla i framtiden. En utredning gjordes därför genom besök och jämförelse av tre olika gästgårdars verksamhet och utformning för att se hur viktig en sådan gård kan anses vara för ett företag. Som ett resultat av denna utredning har därefter ett förslag till en utformning av en bättre fungerande arbetsmiljö vid Hedvigsfors Herrgård tagits fram.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.