The aim of the study was to compare productivity in first thinning of birch stands, when either energy- or pulpwood was harvested. The systems total profitability was also compared by including forwarding and chipping costs. A Gremo 950 HPVR harvester was used and the same driver was used under the entire study. During the pulpwood harvest a Logmax 4000b harvester head was used and a feller buncher head made by Silvatec was used during the energy wood harvest. Six study unit pairs were located in a birch dominated stand outside Ängelholm in Skåne.

The purpose of this study was to examine how small-scale private forest ownersmake decisions regarding pre-commercial thinning. In 2015 it is ten years agosince the storm Gudrun hit the southern parts of Sweden and now large areas arein need of pre-commercial thinning. This study is built upon qualitativeinterviews with seven small-scale private forest owners with forest properties inthe county Kronoberg. The respondents were chosen by the modelSKOGSÄGARPROFILENTM (forest owner profile).The results of the interviews showed that five categories: ownership, the stormGudrun´s impact, silviculture, forestry contacts and driving force was important.How will their purpose and aim affect the pre-commercial thinning? Personalinterests, and expectations of the next generation to take over, are purposes thisstudy has found.

This is a study on the outcome of the Swedish Forest Agency´s mission to provide individual advice to private land owners about precommercial thinning. The study was conducted in Sala municipality and included forest owners that had received private individual advice from a Swedish Forest Agency consultant as well as forest owners that had not received individual advice. One of the central issues was to make comparisons between these two groups. The survey was carried out by telephone interviews combined with a smaller field study. The questions were designed to provide information about to what degree the forest owners had been affected by the advice and if there had been a change in the way in which precommercial thinning was performed. In terms of the amount of precommercial thinning that had been carried out, no statistically significant differences were found between the two groups.

Earlier attempts at mechanising pre-commercial thinning have been met with varying degrees of success. Most attempts have been based on techniques where residual stems are straddled. Early treatment is essential to limit damage on residual trees. One part of the present study is an evaluation of mechanised pre-commercial thinning using the new Vimek 404R. Vimek 404R is a fairly small machine that permits selective removal of stems, making it potentially suitable also for areas overdue for pre-commercial thinning. The study established the level of performance for the machine, as well as the improvement needed to make it an economically viable option.

The purpose of this study is to compare the economic differences between withdraw of forest fuel and withdraw of pulpwood in first thinning, to see which method gives the maximum profitability (income - cost). Another purpose is to investigate the economic impact of the thicket cleaning. The study compares four different methods: i) pulpwood output with thicket cleaning, ii) pulpwood output without thicket cleaning, iii) forest fuel output with thicket cleaning and iv) forest fuel output without thicket cleaning. The study was conducted in a 30-years old stand, dominated by spruce, outside Harg in Uppland. The method that generated the best economic net income was pulpwood without thicket cleaning. It generated a positive net of 1,383 SEK per hectare. Forest fuel output without thicket cleaning also generated a positive net in 720 kronor per hectare.

Stora Enso Skog has a long term contract regarding felling rights and silvicultural activities on forest owned by Bergvik Skog. In the autumn 2006, Bergvik Skog proposed a new thinning program, ?Bergvikgallring?. The new program implied an increased focus on extraction of smaller trees compared to the present thinning program, Stora Enso Skog?s ?Kvalitetsgallring?.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioEnergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip cutting head during the bioEnergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.

Energy is today a very common topic, not only in Sweden but in the whole Europe. In EU they have given out a directive 2002/91/EG about buildings energy use and throw this they have forced their members to show how much energy their buildings use. In Sweden has the gouvernment established a law (SFS 2006:985) about energy declaration for buildings which demands that the building owner needs to show how much their buildings energy consumption are. Important to know is that this law doesn´t applies for industrial buildings.The report will show what the new law about energy declaration for buildings and appurtenant directions will mean for Riksbyggen. Also energy calculations will be done to be able to compare Riksbyggen buildings with the new law and directions.

The brown bear population in Alberta, Canada has been decreasing, while the Swedish has been increasing and all the affecting parameters are not known. This study examined the difference in these populations to see if an explanation could be found in differences between the forest management. The aim of the paper was to see if stand treatments had an influence of brown bears habitat selection in autumn in Sweden and how the results can be used in Alberta. This was done by analyzing bear positions in Sweden with forest data, and comparing forest management data for the study area in Sweden with forest management data for Alberta. The results displayed that mature forests over 60 years that have been commercially thinned are selected by bears rather than forests over 60 years that have not been commercially thinned in.

Stands where pre commercial thinning has been ignored or inadequate often tend to have high stem density and low average diameter when they reach heights of thinning. In such stands, it can often be expensive to do a conventional pulpwood harvest as a first thinning. This study investigates the development of the stands and the economic outcome of forest fuel extraction, or a combined harvest as alternatives to the ordinary pulpwood harvest. Simulations in Heureka StandWise were performed for two thin and dense stands, which were constructed by data from the Swedish National Forest Inventory. The simulations show that the extraction of forest fuel in first thinning at an early stage can provide higher net revenue compared to conventional pulpwood harvest at the same time or later.

Increased energy consumption in the world has created an increased supply of various fuels, especially fossil fuels. The Swedish government has set up various energy targets for 2020. To reach these goals it?s important to increase the energy efficiency in local buildings such as schools. This work illustrates the breakdown between energy supply and energy losses over the school.

Forest ebeaver is, equipped as a bio-energy harvester, approximately four and a half meter long and weigh just over two tons. The main purpose of this report is to find out whether a small machine like Forest ebeaver can be profitable used in early thinning. To find this out a study has been made using the machine to thin in a young pine stand..

The aim of this study was to quantify the productivity and the costs of different harvesting systems (teams), containing harvesters equipped with accumulating harvester heads and forwarders, in first commercial thinnings were an integrated harvest of pulpwood and energy wood were performed. In the beginning the plan was to study and measure 20 sites before and after harvest. Due to storms during the summer of 2010, complete data could only be obtained from 8 of these 20 sites. Seven of these sites were privately owned and one was owned by UPM, all of the sites had been pre-commercially thinned. The mean stem density before harvest was 2578 stems per ha and the mean stem volume was 0.074 m3solid over bark.On average 1518 stems/ha was harvested.

The purpose with this report is to examine how the implemented energy efficiency measures on Bokelundskolan in Växjö have had impact on the energy use. The measures which have been implemented are, new ventilation system, new heating system, optimized adjustment of the heating system, new windows with U-value 1.2 and lower window height, insulation under windows and in the crawl space. The school's energy use before and after rebuilding has been calculated with the calculation program, Vip-Energy 1.5.5.Calculations of energy use for the school with windows on U-value, 0.9 and 0.7 have also been done. The replacement of windows has been studied from a cost perspective. The conclusion is that the exchange of heat and ventilation system was the biggest contributor to reduced energy use on Bokelundskolan.

In today?s society there is an increasing demand for renewable energy sources such as sun and wind power. These sources are intermittent, and energy storage is therefore needed to ensure a constant power supply. This report compares pumped hydro energy storage (PHES), compressed air energy storage (CAES), flywheels, batteries, super magnetic energy storage (SMES) and hydrogen energy storage.The opportunities for further development are limited for PHES and CAES in comparison with the other technologies. Lithium-ion batteries and hydrogen energy storage are considered to have the most potential in the future.