Chemical substances are spread diffusely and uncontrollably as a result of the increased consumption of goods. REVAQ is a certification system that works to reduce the flow of hazardous substances to Swedish treatment plants and to create a sustainable nutrient recycling. According to REVAQ, the yearly accumulating rate of metals should not exceed 0.2% in soil per year. Silver and bismuth are two metals that do not fulfill this requirement. The silver concentration in sludge decreased during the last decade, however the last few years, it has leveled off.

The purpose of the project is to determine the impact of solar cells and electrical vehicles on the future electricity grid and distribution network. Future electricity grids will be affected differently than it does today. Therefore, it is important to determine the impacts so that the current electricity distribution system can be developed and redesign to achieve the future demand. In Sweden, government has changed rules and laws in order to make it easier for private sector to invest in renewable energy sources. Our project focused on the impact of the solar cells and electric vehicles on the low voltage electricity distribution.

Climate change is an increasingly widely known concept. In the EU the construction sector is responsible for more than a third of the carbon dioxide emissions and 40 % of the total energy use. In Sweden, measures have been taken to prevent this climate change. By 16 targets, three of which can be linked to the construction sector, Sweden will reduce the negative trend. None of the three goals with relation to the construction sector will however be achieved before 2020.

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

This study investigates if, and in that case, how design theory is applied in practice in the web development field. Prior research has focused on methods used in the web development field. We wanted to study the designers role in a web design process by comparing existing designer roles with design theory literature. We did qualitative interviews with two practitioners at two different communication agencies in northern Sweden. Based on our qualitative data and literature review we have concluded that a designer has to devote a lot of energy on requirements engineering in order to develop a clear understanding of the design situation..

This study was done regarding whether sealing or ventilation is the best solution to prevent moisture on cold attics. The authors of this report addressed the problem with moisture in attics when they started their cooperation with Peab.The methods included interviews with people, database research, and calculations of a project in Akersberga north of Stockholm. The conclusion is based on interviews and other information as they are analyzed in relation to the house of reference. The focus of this report is on problems with moisture in the attics known as cold attics.The background of the problem with moisture is that today?s slabs are usually insulated to save energy and that the attics nearly gives the climate as the outdoor climate.

Syftet med mitt arbete var att undersöka sexåringars miljömedvetenhet, samt hur de har tillförskaffat sig denna kunskap. Jag har genomfört kvalitativa intervjuer med samtliga 13 elever i en förskoleklass. Genom att diskutera kring 7 saker glasburk, läskedrycksburk, löv, papptallrik, plastmugg, tidning och äppelskrutt som vi lade ut i skogen under en månad fick jag kunskap om vad barnen trodde skulle ske med sakerna under tiden i skogen, var barnen skulle ha slängt sakerna samt hur de hade erhållit denna kunskap.Barnen trodde att det var vädret som påverkade processen med sakerna i skogen. De utgår från vad de har sett och sätter in det i ett sammanhang. Det har lärt mig att utgå från barnens vardag när det gäller naturvetenskapliga fenomen.När det gäller återvinning var kunskapen större om glasåtervinning än om plaståtervinning hos sexåringarna.

The dog is unique in the way that the adult weight can vary 100 folds between the different breeds. Despite this, most of the breeds reach adult size before two years of age. For the large-breed dogs this means a very rapid growth when some of them can have a weight gain of up to 150 times their birth weight. The most rapid growth occurs when the puppies are between three to six months old and that kind of rapid growth during such a short period of time makes these large-breed puppies very sensitive to deficits and excesses of energy, nutrients and minerals. Some examples can be excess of energy, excess or deficit of minerals such as calcium and phosphorus or deficits of protein. The rapid growth can also make the large-breed puppies predisposed to some diseases affecting the skeletal and joints.

The development within the textile industry is always ongoing with development of new andbetter textiles, which often mean the use of non-natural materials like polyester. This doesn?t lineup with the work shared around the world against an improved environment, so the idea came touse a form of linen fibers instead of polyester as the reinforcing material together with cotton.The idea was to use flax, linen of low quality, which is seen as a waste product and garbage inthe production of high quality linen and flax seed oil. This flax of low quality needs to beseparated before it can be used in cotton spinning machines. Fireball 2 is just that, a process toseparate flax fibers through the treatment of a technique called electrohydraulic discharge.The thesis works goal is to evaluate the Fireball 2 process ability to separate flax fiber.

Ethanol for automotive purposes is an issue much debated and researchers disagree about the benefits of bioethanol. Converting energy-rich crops into ethanol suitable as motor fuel is a complex process and continuous development and improvements of processes and material used are important steps in the work of developing environmental friendly fuels. Grain is usually preserved by drying which consumes a lot of energy. Alternative storage of high-moisture grain in airtight storage systems reduce the energy required to produce bioethanol and studies have also shown that ethanol yields are increased more than 10% in ethanol fermentations of moist grain compared to dry. Airtight storage is often not perfectly airtight so biocontrol agents are necessary in order to preserve the grain.

This study was carried out at the request of the bio energy company Naturbränsle. The company handles annually 750 000 m3 of chips from logging residues from a large area, from Östergötland in the south to Härjedalen in the north. In that area, about 50 bio fuel plants are customers. When Naturbränsle deliver chips from logging residues to their customers, the moisture content varies from 30 % to 60 %. The aim of the study was to sort out the affecting factors on the moisture content in the chips during handling and storage processes.

In this thesis a number of energy saving methods for a multiplier on algorithmic level are investigated. For the investigation a multiplier is constructed in VHDL, after which the circuit's performance is investigated. A number of techniques for reduced power consumption are introduced in the circuit and are then evaluated. The conclusions are that all investigated methods, pipelining, interleaving and voltage scaling, should be maximally made use of in order to minimize the power consumption..

Europaparlamentet antog i december 2002 ett direktiv om byggnaders energiprestanda.Direktivet kräver att byggnader skall energideklareras, alltså undersökas och dokumenteras urett energiprestandaperspektiv. Direktivet har hittills resulterat i två svenska delbetänkandensamt ett slutbetänkande. Dessa tre skrifter kommer att ligga till grund för den svenska lagenom energideklarationer. Enligt SOU 2005:67 skall energiprestandan beräknas för samtligasmåhus och nybyggda hus. För flerbostadshus och byggnader med lokaler skallenergiprestandan beräknas då det inte finns några uppgifter på byggnadens energianvändning.Eftersom byggnaders energiprestanda är en central del av energideklarationerna ägnas det enutförlig analys av olika energiflöden ut ur och in i en byggnad.

Detta examensarbete har genomförts i samarbete med Värmex AB där vi har haft Anders Ericsson som handledare, och Peter Hansson (Sweco) som handledare från skolan, Kungliga tekniska högskolan i Haninge.Idag är energianvändningen i flerbostadshus en stor fråga att ta itu med, och för varje byggnadsprojekt skall en energideklaration som visar mängd köpt energi göras. Vi strävar idag efter att minska energianvändningen i flerbostadshus med 50 % till 2050. I denna analys beskriver vi vilka åtgärder man kan ta an för att minska just energianvändningen i ett specifikt flerbostadshus belägen i kommunen Nacka i Stockholm.Då denna byggnad stått från år 1949 utan större underhållning har det visat sig att byggnaden står över BBRs krav gällande energianvändning (90 kWh/m2), och stor anledning är klimatskalet. Källor visar även att delar av klimatskalet så som fasad etc. bör ändras inom 30 år efter det att det byggts, vilket inte har gjorts.Vi har genom en programvara, VIP-Energy valt att utföra denna analys.