Den här rapporten har skrivits som en del av ett examensarbete på energiingenjörsprogrammet på Högskolan i Halmstad under våren 2014. Examensarbetet har genomförts i samarbete med AB Färdig Betong samt ÅF Infrastructure AB i Göteborg.Syftet med projektet är att undersöka energibesparingspotentialen hos AB Färdig Betongs produktionsanläggning på Ringön i Göteborg.Projektet har inneburit en energikartläggning av en industriell produktionsanläggning för lösbetong. Utgångspunkt för energikartläggningen har varit energiledningssystemet ISO 50001, med målsättningen att ta fram en teknisk energikartläggningsrapport i enlighet med standarden.Anläggningen har analyserats ur ett energibesparingsperspektiv. Data- och informationsinsamling samt mätningar har genomförts för att ta fram indata som beräkningsunderlag. Genom beräkningar har sedan möjliga energibesparingspotentialer och åtgärdsförslag tagits fram.Den totala energibesparingspotentialen för anläggningen innebär en besparing på 223 MWh av anläggningens totala energianvändning på 857 MWh år 2013, vilket motsvarar en minskning med omkring 26 %.Allmänna slutsatser är bland annat att all produktionsutrustning bör placeras inom klimatskalet, att all uppvärmning bör vara temperaturreglerad samt att ett mer långsiktigt energiperspektiv behövs i anläggningen.Energibesparingsmöjligheterna för anläggningen är mycket goda och investeringskostnaderna är i allmänhet låga..

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

ABSTRACT The purpose of this medical record research was to study 30 patients with chronic subdural hematoma on a neurosurgical clinic, mapping documented nutritional status, preoperative fasting and hydration and energy supply before surgery. In addition peroperative administration of fluid and vasoactive drugs, as well as postoperative complications and length of hospital stay were studied. The mean age of the patients was 71 years. Nutritional status was evaluated in 12 patients, out of these seven were judged to be at risk for under nutrition. Fifteen patients had surgery day 1 (total fasting time on average m 11 h), eleven had surgery day 2(29 h), three had surgery day 3 (35 h).

The prevailing food and energy crisis of the world, due to the declining reserves of fossil energy and a never ending rise of consumption, forces us to look into new fields to supply our energy demand. The boom of bio energy is criticized, as food crops are used to provide biodiesel and ethanol and the volumes are ridiculously small to supply world demand. Algae are one of the world?s oldest life forms and exist in many different phyla, providing a great variety to choose from, for different purposes. Cultivating microalgae offer a way to produce energy at great volumes without competing with food production and at the same time the algae offer a way to use our expensive nutrients in a more efficient way, besides this the algae are carbon dioxide neutral since their carbon source can be supplied by the atmosphere and the additional energy required can be supplied by algal oil or other renewable sources.

Most of the portable electronic devices use a battery as a primary power source. Nowadays, when the applications are becoming smaller and smaller and more power efficient, the designer needs to concentrate more on reducing power consumption, using secondary power sources and introducing power storage devices. Multiple power source availability and a power storage device on the board will make the applications much more useful and efficient in everyday use. This thesis proposes a power supply unit (PSU) for wireless sensor platforms which is capable of supplying a sensor node with energy from multiple sources, as well as status information from the PSU. Present power storage devices, like electric double-layer capacitors (EDLCs) and batteries, have become more and more common as their characteristics have developed.

The goal of this paper is to provide a model for a sustainable electricity system to an island, in the Pacific Ocean near the equator.The method which has been used is to model supply and demand of electricity in the computer program Stella, through the creation of a dynamic system that balances them against each other. The result from the model will then be used to calculate the electricity price per kWh for the island.The result of the work is that electricity from solar energy is comparable with electricity produced from oil, if the oil pays for all its external costs, and the potential for pumped hydro storage plants is located. It also requires that consumers of electricity can be their own producers to avoid the expenditure of tax and reducing the cost of distribution. But since oil is a finite resource and has had a rising cost in recent years, while solar energy has had a declining cost, perhaps this will be a more competitive solution in the future.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

Background The usage of Nutrition supplement in the elderly care is commonly occurring and plays an important role in the intake of nutrition for the elderly. The usage of nutrition supplement is to reduce malnutrition within elderly care. For the elderly it is crucial to keep a healthy diet and to never lose weight. The loss of weight can be very dangerous it could even be fatal for the aged and should therefore be avoided. To have a diet that is rich in energy such as enriched meals prevents the elderly from receiving a shortage of calories since the diet is rich in fat, protein and thus also rich in energy.

Development of a vacuum cleaner nozzle for energy efficient dust pick-up.

The interest for power and energy measurement has greatly raised with todays increasing electricity prices and enviromental awareness. In the search for energy efficient solutions, the measurements are more complex due to increasing of non linear components. Harmonics and non sinusoidal voltages put high demands on sampling and filtering. Meanwhile, the price must be controlled so the customer still will find it interesting to invest in smaller plants. ITT W&WW asks for a robust, heat resistant power meter with compact dimensions to allow mounting inside the casing of a pump.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

Abstract Background: In 1997 the Kyoto Protocol was signed, it?s an international agreement which is aimed to reduce greenhouse gas emissions. Sweden's goal is to reduce energy using in buildings with 20 percent by 2020 and 50 percent by 2050. This is a comparison with levels from 1995 (Glad, 2006). For Sweden to be able to reach its goals, they need to construct more low-energy buildings (Åhman, Wahlström & Lundblad, 2010).

The Island of Öland has one of the best wind climates for land based wind power in Sweden. An objective for the Island is to become self sufficient using electricity from renewable source of energy such as wind. There is currently 55 MW capacity installed on the Island and it is estimated that grid congestion will occasionally occur if more than 135 MW was installed.The aim of this thesis is to investigate he possibilities for load management by smart charging of electric vehicles, EV. The definition of smart charging is that the charging is done to some extent with an ICT-system, (information and communication technology) that correlates wind electricity generation to the charging of electric vehicles. The purpose is to avoid grid congestions on the sub-sea cable that connects Öland to the mainland because that in turn would curtail wind energy production.