This report is the result of a thesis conducted at the consulting firm Bjerking AB andis the final part of the Bachelor Programme in Construction Engineering at Universityof Uppsala. The work aims to investigate the costs and how the choice of ventilationsystem affects building projects during a long-term period. This report covers costssuch as investment, maintenance and energy but also how they affect residents andbuilders. Building regulations for energy consumption are expected to be tougher;therefore a comparison of two different heat recovery ventilation systems(HRV-system) was made. One system is based on a centrally placed unit that coversthe whole buildings ventilation through vertical shafts.

Life Cycle Cost, often abbreviated as LCC, is a common tool for comparing the total cost of different alternatives, such as heating and cooling methods. Common heating and cooling methods in Sweden are geothermal energy, district heating and district cooling. This report aims to evaluate how different heating and cooling methods differ from each other while being applied on three different types of buildings, using selected LCC-models. Information about the selected LCC-models wasretrieved from each separate model and its website. Reports and agencies were used as sources for information about the heating and cooling methods.

Fire has historically been of great ecological importance in the boreal forests of Sweden. The forest fire regime has, however, varied between different parts of the country. The objective of this thesis is therefore to investigate the fire history in Fulufjället National Park and, on this basis, give suggestions for future fire management. The reconstruction of fire history was done by cross-dating fire scars in samples taken from living and dead Scots pine (Pinus sylvestris). Local fire chronologies were established at 17 points in the forests in and around Fulufjället National Park by cross-dating fire scars on 54 samples. The oldest year-ring dated from year 968.

Abstract Background: In 1997 the Kyoto Protocol was signed, it?s an international agreement which is aimed to reduce greenhouse gas emissions. Sweden's goal is to reduce energy using in buildings with 20 percent by 2020 and 50 percent by 2050. This is a comparison with levels from 1995 (Glad, 2006). For Sweden to be able to reach its goals, they need to construct more low-energy buildings (Åhman, Wahlström & Lundblad, 2010).

The Island of Öland has one of the best wind climates for land based wind power in Sweden. An objective for the Island is to become self sufficient using electricity from renewable source of energy such as wind. There is currently 55 MW capacity installed on the Island and it is estimated that grid congestion will occasionally occur if more than 135 MW was installed.The aim of this thesis is to investigate he possibilities for load management by smart charging of electric vehicles, EV. The definition of smart charging is that the charging is done to some extent with an ICT-system, (information and communication technology) that correlates wind electricity generation to the charging of electric vehicles. The purpose is to avoid grid congestions on the sub-sea cable that connects Öland to the mainland because that in turn would curtail wind energy production.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

In cooperate with Asko Cylinda we have developed a new heat system too short the processtime and reduce the energy consume in a dishwasher and still have it too be a class AAA.The environment and quality is important for the company too still be the number one onthe market, If they want too keep that position the product developed of new innovations willbe very important. The systems we have developed are more effective and reduce energy uptoo 25 %. The process time is reduced too less than two hours, from the today two andhalf-hour. The solutions are too heat up the rinse water and the dishwater at the same time,with a new heating system and it make are solutions unique and effective. Its good for thedish and the environment.

According to the Swedish strategy for forest protection, additionally 40 000 ha productive forestland will be protected in the county of Västerbotten, between 1999 and 2010. A national project was carried out to distinguish the proportion of forest with a high biological value, in all counties. The project resulted in demarcation of small landscape areas or small ?biological value regions? (bvr), with higher concentrations of forests with conservation values and red listed species than the surroundings. In Västerbotten, 26 such bvr?s were identified and the Counties Agency and Forest Agency in Västerbotten developed a regional strategy for forest conservation to standardize the forest protection process.

Fuel pellets are a refined bio fuel mostly consisting of residues from sawmills and wood industry. At Rindi Västerdala AB's combined bio energy plant in Vansbro fuel pellets are produced, while the waste heat from the process is used for district heating. The pellets are produced from sawdust, wood shavings and dry wood chips that is dried, milled and pressed into small cylindrical rods. The advantage of refining the wood material in this manner is that the energy value is greater per unit volume and unit weight, thereby the cost of transportation per energy unit is reduced. Also, less storage space is needed.Pellet manufacturing is a complex process since many parameters affects the final results.

To fulfill the climate target that EU and the Swedish government have decided to apply, it becomes increasingly important that the energy efficiency of existing buildings and making new buildings energy efficient as possible. Of Sweden?s total energy consumption in 2011 was 40% used by residential and service. Of the 40% of the energy consumption was 60% used for heating and domestic hot water. A report from year 2012 shows that one reason why the heating volume is so great could be due to underestimating on the energy consumption for the heating in the planning of the building.

Since the 1950s, the development of modern rotation forestry in boreal Fennoscandia has resulted in a severe reduction of older forests, and a high degree of fragmentation among the small patches that remains of old forest. In Sweden, when performing conservation value assessments in order to identify and preserve the remaining forest habitats, the government authorities use to a significant extent a set of indicator species that indicate habitats of high biological conservation value. One species considered to indicate high conservation values in pine-heath forests is the red-listed ectomycorrhizal (EM) macrofungi Sarcodon scabrosus (Fr.) P. Karst. In the present study, the validity of using S.

Nature conservation has for a long time been founded on the assumption that high ecological values depend on low human impact. In Sweden this has led to forests with these characteristics being strictly protected from human influences. However, it is also known that historical land-use can enhance ecological values in forests. Mountainous forests in Sweden, which have not been affected by modern forestry, have for a long time been considered as untouched by people. However, forest history research has in recent years shown that even these areas have been used by people for a long period of time.

The global biodiversity loss is mainly due to human activities such as an intensification of forestry. Boreal forest ecosystems in Fennoscandia are characterized by disturbances such as forest fires, storms and floods. However, industrial forestry practices suppress forest fires and change the landscape, leading to a loss of habitats and associated species. Particularly lichen species with slow adaptation abilities and a strong substrate specificity face an extinction debt in boreal forests since their substrates are long-lived but no longer created. In this study the species-substrate relationship of two red-listed forest-fire dependent lichen species Carbon-icola anthracophila and C.

This thesis is the result of the investigation and solution of a mechanicalproblem regarding flywheel malfunctions. A flywheel is, in short, a devicethat relies on a rotating object?s moment of inertia to store energy overshort time spans. This project is part of the development of a fourthflywheel prototype at the division for electricity at Uppsala university,which uses magnetic levitation to keep a hollow cylinder rotating at veryhigh speeds inside a vacuum chamber. Should the magnets fail however, orsome other error occur that leads to an uncontrolled state of rotation, thecylinder needs to be stabilized mechanically by a device usually referredto as ?back-up bearing?.

Emission of nitrogen oxides as well as carbon monoxides is an inevitable result of combustion. A Swedish law "Law of environmental fee for emissions of nitrogen oxides as a result of energy production" (lagen om miljöavgift på utsläpp av kväveoxider vid energiproduktion (SFS 1990:613)) controls the emission of NOx from energy production by a system of fees. The system has resulted in a strong approach toward less emissions of NOx among the energy production plants. High emission levels, today exceeding 52 mg/MJsupplied fuel, leads to costs for energy production companies. This paper examines possibilities to reduce the emissions of NOx by optimization of the SNCR-technique in a biofuel fired heat and power plant.