Sök:

Sökresultat:

2394 Uppsatser om Energy efficient - Sida 42 av 160

AI i verksamheter: Ett effektiviserings- och riskhanteringsperspektiv. En studie om till?mpningen av AI i organisationer

The purpose of this work was to investigate and provide understanding regarding how AI can be used to make organizations more efficient, where risk management is also discussed. The basic model for the study is the Resource-based view, which is about making use of one's resources which are described through many different perspectives. The method used for this study was a qualitative analysis, which was applied through interviews with several people with high positions within companies and relevant skills, based on insight and experiential knowledge.These people work in different industries, therefore a large part of the work was intended to carry out a comparative analysis between a line of different businesses. The results showed that AI is in a developing phase, and based on the respective industry, it has developed in different ways. Finally, it turned out that AI can make businesses more efficient by, among other things, managing data and automating various work processes faster compared to humans.

Utredning av primärluftförvärmning till två avfallseldade pannor

The purpose of this degree-project was to investigate the possibilities for primary air preheating into the two smallest waste incineration boilers of Halmstad Energy and Environment. The investigation is a pre-study which has the primary goal to evaluate technical and financial offers from companies that manufacture primary air preheater, and investigate if it is technically and financially profitable to do a purchase on primary air preheaters in the future.In the pre-study it is proposed that it is most efficient to have individual primary air preheater, one for each incineration boiler and the primary air are also proposed to be preheated by hot water in the pre-study. Further in the pre-study it is proposed that the heat-exchanger should have plain tubes instead of finned tubes, to avoid getting dirty fast. The space in the boiler-room is limited, and therefore the major problem was to fit in the primary air preheaters into the boiler-room. By comparing the different offers from the companies, the result in the pre-study shows that the offer from the company C.A.

Val av komplementmaterial för våtkompostering av klosettvatten

Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

Turbinkretspump system - Kraftvärmeverket i Borås

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

MKB för vindkraft : En granskning av fyra miljökonsekvensbeskrivningar

Today's unsustainable resource use is influenced by many factors. One key factor isproduction methods and patterns. Trough change of production patterns enterprises can bepart of the solution to a more sustainable society. This case study has analyzed environmentalperformance of the printer company Edita Västra Aros Ltd (EVA), who has gained awards forits environmental work, and what driving forces they have had during this work. The survey isbased on a qualitative method and the collected data consists of documents and staffinterviews, which have been analyzed with content analysis.

Torrefaction of biomass : a comparative and kinetic study of thermal decomposition for Norway spruce stump, poplar and fuel tree chips

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

Utvärdering av laddningskoncept för lastbilsbatterier

When drivers overnight in the truck lots of electric energy is consumed by heaters, fans, lights and other extra equipment. If the engine is not running, this energy is taken from the lead/acid batteries of the truck which then needs to be recharged during operating hours. The fact that the charge acceptance of the lead/acid batteries is dependent on the temperature makes it hard to fully recharge the batteries at lower temperatures. A negative charge balance can lead to starting problems within a few days use in cold climate.In this thesis work, the effects of different battery charging concept are evaluated on the most common Scania battery (175Ah). A battery model is implemented in Matlab and some simulations of charging are made.

From a rough to a fair way of organizing : En analys av genomförandeorganisationen i Svenska Golfförbundet

AimThe aim of this study has been to inquire into how the Swedish Golf Federation can make their implementation organization more efficient. The intention with the essay has also been to conclude with a proposal for organization structure for the Swedish Golf Federation. The questions of issue have been: How does today?s implementation organization look like? At which level and within which areas do the interviewees consider that the major problems are found today? How do the interviewees consider that the implementation organization should look like?MethodThrough a strategic selection in cooperation with the assigner the Swedish Golf Federation 15 interviewees have been chosen. The data collection has been executed in form of semi structured interviews.ResultsToday?s organization for implementation consists of one central function in Golfens hus with approximately 75 salaried employees, 21 district federations and 485 clubs.

Utvärdering av möjligheten att tillvarata energi ur processvatten : En undersökning gjort vid Olofsfors AB på uppdrag av UMIA AB.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

Distribution och försäljning av kvalitetsfuru : en fallstudie

The purpose of this study is to analyse how a distribution and sale-network for quality softwood lumber should be designed to fit sawmilling companies? business concepts, and at the same time satisfy customer needs regarding delivery time and quality aspects. This thesis work is a case study based on a sawmilling and retail company in Sweden. AB Karl Hedin is a private owned sawmilling company with 500 employees. The company?s turnover is 1500 million SEK, it includes 4 sawmills, 16 builders merchants stores and a packaging company.

Analytisk dimensionering av räddningstjänst : fördjupad analys av insatsförmåga och täckningsgrad inom Räddningstjänsten Syd

In order to reduce the number of casualties and injured from accidents the rescue service must become more efficient and flexible. It is noted that far more people is injured and killed in traffic accidents than from fires. During the daytime the number of accidents in about three times higher than during the night, even so today the number of fire fighters on duty is the same day and night.Two computer models for simulation of different locations of the rescue services are used to determine the best options for placement of the rescue services. A cost-benefit analysis is also used to determine if today's fire stations are efficient for the society from an economical point of view.The results of the different models are that the fire station in Lund is misplaced. The number of ladders in Malmö can be reduced.

Byggnadsintegrerade solcellssystem : Solceller som byggnadsmaterial

This thesis aims to identify the building integrated photovoltaic solutions available in the market with respect to general pros and cons of different systems and a technical description of there attachment system. Investigate and provide examples of various building integrated photovoltaic solutions in Sweden and describe the experiences and results of these projects.The methods used to obtain relevant information are interviews with individuals involved in significant projects and a thorough search of different solutions from solar suppliers.The conclusion is that solar energy is needed for a sustainable society. There are endless opportunities regarding BIPV, with many companies with different products and individual solutions. But so far it?s not so customary in Sweden.

Löpmagsförskjutning hos mjölkkor : en besättningsutredning för att identifiera riskfaktorer för metaboliska störningar

The purpose of this study was to find possible explanations to why the studied herd had an increased incidence of abomasal displacements. The incidence of abomasal displacement in the herd was three times higher than the incidence of an average Swedish herd. The cows in this study were fed a total mixed ration. The different parameters studied were: energy content in food, nutritional content in food, body condition scoring, concomitant other diseases, and blood parameters of glucose, fructosamine, cholesterol, insulin, betahydroxybutyrat and free fatty acids. The author?s suggestions to decrease the problems are to decrease the energy content in the TMR to lower the cows? body condition scores in the dry period and changing the content in the TMR to increase the amount of NDF and adding structure in the form of chopped straw.

Kombinerat system för ventilation och rumsuppvärmning : Parameterundersökning i simuleringsmodell för takvärmesystem

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.

Spårtaxisystem i Uppsala

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

<- Föregående sida 42 Nästa sida ->