Design of a house requires knowledge of both technology and economics. Heating and ventilation shall be designed, costs are calculated and estimated and requirements must be fulfilled. Which heating system is to be elected is also a difficult choice, especially with rising energy prices as a factor.The choice of energy system is not always given, because it depends on several factors. Below is a comparison between district heating, geothermal heat pump and electric boiler from an economic standpoint. In a previous report appears district heating and geothermal heat pump as the best options.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

TitleEnergy-efficiency ? of slab blocks built in the sixtiesAuthorsRichard Sandahl and Kim SöderbergEducationHalmstad University, Section for economy and technique Construction Engineering 180 ECTSSupervisorMargaretha Borgström, Universitylector construction physics, Halmstad UniversityContact person at HFABUlf Johansson Heating, sanitation and energy co-ordinatorReportExamination paper at the construction engineering program is performed in cooperation with HFAB (Halmstad real estate concern Inc.)AimThis examinations work is done in cooperation with HFAB and there project on the block around the street Maratonvägen. HFAB:s dwelling stock on this area are going through a bigger renovation and in relation to this they are looking on the possibilities to make this building more Energy efficient. That is why this examination paper has as purpose to answer the question if it is possible to make slab blocks built in the sixties more Energy efficient. This is done by calculate Energy efficient measures on a chosen apartment block at Maratonvägen in Halmstad, in an energy and expense perspective.MethodThe examination paper is based on different methods, mainly calculation but also qualitative conversation studies, economic calculations and literature studies.

More efficient energy consumption is essential to secure a sustainable future, not least within the building and real estate sector which answers for approximately 40 % of the EU countries total energy consumption. One part of EU: s work to reduce the energy consumption is the directive on energy performance of buildings which among other things have lead to stricter demands on energy performance in new and renovated buildings.One of the difficulties with making buildings more energy effective is that it often demands big investments and although it results in lower operating costs the extent of these savings and therefore also the repayment time can be difficult to decide beforehand. To make it interesting for property owners and also tenants to invest in Energy efficient buildings powerful incentives are needed. Favorable loans to energy efficiency projects are one example of governmental instruments that have been tested in other European countries with good results.Reduced operating costs appear to be the main incentive for property owners to make their buildings more Energy efficient. The best result of an energy efficiency project is usually achieved by cooperation between property owners and tenants but in order to make that interesting it is important that both parts can profit from the savings.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

The amount of electricity is limited in Namibia and the large distance between towns andvillages complicates the energy supply in the country. Therefore an alternative way to provideaccess to appropriate energy technologies is needed. The Government of the Republic ofNamibia (GRN) has adopted an approach of helping off-grid households by establishing EnergyShops in each region in Namibia and these shops are going to sell basic renewable energy andEnergy efficient products. The Renewable Energy Efficiency Institute in Namibia (REEEI), theinitiator of this thesis, is coordinating the establishment of these Energy Shops.The main purpose of this thesis was to examine the needs of energy products for the Namibianpopulation and develop an assessment method for the Energy Shop in how to select appropriateenergy products already on the world market. The purpose was also to develop a method forchoosing an Energy Shop.

In Sweden the residential and commercial sector is a major user of energy, why the Swedish government has set a specific goal to half the energy usage in buildings by 2050, compared to 1995. The Swedish Energy Agency has therefore started the campaign ?Halvera Mera? to encourage demonstration projects that will show how to renovate in an Energy efficient way, and in doing so prove that it is possible to reduce a building?s energy usage by half and still make a profit. These projects are intended to serve as good examples and give inspiration to residential owners to perform Energy efficient renovations. To make sure that these projects serve their purpose, it is important to know what will inspire and what will impede a residential owner to invest in energy efficiency improvements.

The housing sector of today represents for almost 40% of the energy consumption, an energy consumption of which the major part consists of non-renewable energy sources. This is not sustainable and utilization of new energy-efficient technologies in buildings can be a step in the right direction, towards a sustainable energy society.This report has been made on behalf of and in cooperation with Älvstranden Utveckling AB in Gothenburg to examine how future energy-efficient technologies can affect the energy demand in energy-efficient multi-dwelling buildings.The report is based on Älvstrandens passive house, Hamnhuset, a house whose energy consumption is far below the BBR's requirements. The report looks at the opportunities for improvement within windows, insulation, solar energy technologies, as well as white goods. Computer simulations are then made to apply the selected technologies into a reference building. Technologies are selected from an Energy efficient perspective and no account has been taken of other aspects such as the economy.

Energy efficiency has become a very topical issue that has been discussed throughout the European Union for preventing negative environmental impacts that have been associated with the consumption of energy. In the residential sector have mainly municipalities set strict requirements for the reduction of energy consumption while the renewable energy has been asked. Different concepts of low-energy buildings have been developed to reduce the cost of operation and maintenance in existing buildings such as in new ones.This thesis has aimed to minimize the energy cost of a large building which has had low energy consumption features originally. Energy reviews has been initiated in order to be able for showing how the house electricity could be carried out even more efficiently.The work was initiated through a literature study to clearly increase the reliability on the energy subject. Different concepts of low-energy buildings have been treated in connection with its specifications, afterward those have been compared with the obtained results.

The EU Council adopted in 2007, environmental and energy goals with the aim of them must be met by 2050. This, in combination with those of the Swedish government 15 enacted environmental goals is supposed to lead the way for the Swedish environmental work.This report has examined measures in properties in the Swedish Cooperative Housing Society (SKB) stocks.The report discusses a range of measures that might be appropriate to apply on the properties to make them more Energy efficient.One of the measures discussed, the vent whose primary purpose is to create a good indoor environment for the residents but is also where the most energy is lost.Another measure discussed is insulation of the building envelope on the estate to make it more Energy efficient. To put extra insulation on the building envelope is important because of the large amount of energy that is lost through the walls, ceilings and floors.Future actions that may be implemented is individual billing of heating and hot water. This system has been used in European countries since the 70's and today the EU wants to increase the own individuals control over their electricity costs. This has led to a discussion whether to implement the system in Sweden or not.However, there are a number of equitable measures to be sorted out before the system can be used in any great scale.Finally, it is important to remember that environmental measures should be the primary and the pursuit of cost reductions the secondary otherwise you risk the environmental work to be counterproductive..

In Uppsala, Sweden, Vattenfall has a combined heat and power plant. On the premises there is an engineering workshop with old fluorescent and mercury lamps that need to be replaced. This provides a great opportunity to save energy and money by installing more efficient lighting. The main purpose of this study was to present two functional and Energy efficient lighting systems including control system. The lighting systems were designed by investigating the working environment, measuring illuminance and by simulations in the software DIALux.

The Swedish building stock accounts for nearly 40 percent of the total energyconsumption in the country. Properties built today are likely to last for 100 years orlonger. This places high demands on long-term and smart energy solutions that willkeep the future Swedish building stock energy consumption at low levels. This thesishas focused on examining how the energy performance of buildings is affected bydifferent choices of window types in different cardinal directions. The objective wasto obtain a basis for recommendations on how window properties can be optimizedfor different types of buildings and orientations.

 AbstractThe background for this study is that there were a great amount of buildings constructed in Sweden in the years 1965-1975 in a program designed to create one million apartments in a time-period of ten years. These buildings are now, somewhat forty years later in most cases in very poor condition and the need for renovation is great and urgent. This has become a growing problem and more and more voices are being heard pointing towards the vast and extremely expensive task of renovating these buildings. Lately, it has also been more and more important for buildings to be energy-efficient and sustainable environment friendly.In recent years there has been an atempt to solve these problems by renovating such buildings but at the same time making them very energy-efficient. This is in some cases being done by isolating the shell of the building and changing the ventilation-system and so forth.

This thesis concerns an energy audit of a food industry. The company's business consists of boiling and peeling shrimps, and producing mayonnaise-based salads. This type of work involves energy-intensive processes, such as steam generation, compression of air and refrigeration of large spaces. These needs are supplied with electricity. Furthermore, the industry is a major consumer of district heating, particularly for heating the supply air in the ventilation system.

Every year new premises are built in Sweden, and even if they are made as Energy efficient as possible, this will not reduce the energy demands, but the rate of the increase of the energy use will be reduced. One type of facility in Sweden that is a major energy user is public baths, and this makes public baths an interesting facility to study more closely. There are around 500 public baths in Sweden and about 75 % of those can be seen as older baths with large need of renovation, and they all require a high level of energy efficiency measures. To show how the energy demand increase or decrease depending on the changes chosen to be made, the simulation application IDA Indoor Climate and Energy was used. Simulations were made and compared for several cases, with two extreme cases as starting points.