If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.

Today, high-yielding leys of good quality are a must for Swedish dairy and beef enterprises if they are to become profitable. Thus, it is of interest to evaluate the quality of the recently released high-yielding Festulolium hybrids ((Festulolium braunii (K.Rich.) A.Camus). The aim of this project was to determine at what phenological stage three different Festulolium hybrids should be cut in order to get the highest nutritional value. The hybrids studied were Hykor, Perun and Paulita. In the study I also investigated if leaf proportion of the crop could be useful for predictions of the crop content of metabolizable energy. The cultivars were grown in plots within a variety trial with ryegrasses.

Research in solar energy is taking big steps in both solar heating and solar electricity. It´s not only the technologies alone, but also the combination of both solar electricity and solar heating which is what is called a solar hybrid. The idea of a solar hybrid is that a solar cells efficiency decrease with increased temperature and can with help from a solar collector be cooled and the heat can be utilized. This thesis report compares heat production and electricity production with respect of, in first hand, a solar hybrids geometry in the cooler. The theory chapter describes solar heating and how different solar cell technologies work and their environmental impact at the production and how compatible these technologies are for the solar hybrid.

AbstractThis degree project is about having meetings in The Swedish Social Insurance Agency, which is awide organisation. This work will concentrate on one of the projects going on within theorganisation which is travel-free meetings, where they are building a video meeting system thatallows the employees in the organisation to be able to meet with each other through the use ofvideoconferencing instead of physical meetings.In this work we will show how Kaikaku (radical system changes) along with Kaizen (continuouschange) can support an organisation to become more efficient and reduce wastage. We have donethis work in an organisation that is present in over one hundred locations in Sweden.The Social Insurance Agency has over 13 000 employees at over one hundred locations inSweden.The organisation has to be close to their customers and provide the best service aspossible. To be able to work in a uniform way, the employees get together and have meetings.Some meetings are just progress meetings and takes perhaps no more than two hours to complete.However, if seven employees from seven different locations need to have meetings, in the worstcase, they all have to meet in a common place.This is expensive for the organisation in travel costs, time and absence from work, but thetravelling also contributes to environmental pollution if the employees are travelling by a fuelpoweredvehicle.A whole day could go lost for having a meeting in about two hours if all sevenemployees went from their own cities to e.g. Stockholm for the meeting.Muda (wastage) of travel created several different types of Muda, namely:? Wastage with anticipation when the employees had to wait for e.g.

Many of todays studies show that district heating is one of the betteralternatives as heating source because of its low environmental load.The energy source is often leftovers from other processes producing energy or waste, like garbage or chips.Electricity in combination with geothermal heating is another heating system that has increased sharply during the last years, and also this system decreases the discharges that have negative affectson the environment compared to several other heating methods.This report aims to, concentrated towards these two different heating systems, estimate the amounts of discharges they indirect cause and how the environment is affected.We have calculated the mean value for discharges of carbon dioxide, nitrogen oxide, sulphur oxide and dust generated from electrical power used in Sweden.Through interviews and research we have gained data for the same substances that district heating based on combustion of garbage and biofuel generates.We have also in cooperation with a housing company chosen a building we see representative for many of the new single-family houses built in Sweden today.Based on its shape and appearance we theoretically created three alternatives of the same house, each of them with climate screens different from each other.Together with the amounts of discharged environmental affecting substances, these houses were the base for our calculations and studies when investigating the different heating sources environmental effect.The results have thereafter been analyzed and discussed from different angles..

Buildings today are built to maintain a healthy indoor environment and an efficient energy usage which is probably why damages caused by dampness has increased since the 1960?s.A study between year 2008 and 2010 showed that 26 percent of the 110 000 examined houses had damages and flaws caused by dampness that could prove to be harmful later on. This means that one out of four bathrooms risk the chance to develop damages by dampness. Approximately 2 percent of the houses had already developed water damages. It is here where the problems appear.

Background: In the past 10 years private label has increased significantly in the Swedish grocery market. This is an important strategic event, which is a great challenge to suppliers as it causes stiff competition. To handle this situation an increasing number of suppliers have to make the decision whether to produce private label or not.Purpose: The purpose of this study is to find and analyse factors that influence suppliers in the Swedish grocery market to produce private label. On this basis we intend to confirm or develop existing theories within the field of study.Research method: The study has a qualitative approach where empirical data has been gathered through interviews with suppliers and retailers in the Swedish grocery market.Results: This study has identified factors that underlie suppliers? decision to produce private label.

This thesis examines the effects of electricity visualization in an office building. The subject was investigated through the creation of a web based visualization tool that was made accessible to the about 1500 employees in a large office building. The visualization was available for three weeks. During this period interviews, user studies and observations took place in order to evaluate what, if any, effects the visualization had on the attitudes and behaviors in the office. Electricity use data was collected and analyzed to see if the project had a statistically significant effect on the electricity consumption in the office.The results from the interviews and the data analysis indicate that no reduction in electricity consumption took place, and a number of factors that could increase the chances of success were identified.

Ventilator-associerad pneumoni (VAP) är en vanlig förekommande komplikation hos patienter som vårdas på intensivvårdsavdelningar (IVA). Komplikationen leder till förlängd vårdtid, ett ökat lidande för patienten och högre mortalitet. På en intensivvårdsavdelning på ett sjukhus i södra Sverige används idag flera metoder för att förebygga VAP, dock används ej slutet sugsystem som preventiv metod. Syftet med denna litteraturstudie var att undersöka om slutet sugsystem minskade förekomsten av VAP jämfört med öppet sugsystem. Sju vetenskapliga artiklar granskades och kvalitetsbedömdes.

Rapporten beskriver arbetet med att ta fram en regulator för värmning av luft i en ventilationsanläggning för gruvor. Den redan existerande anläggningen förser två gruvor med luft genom två separata schakt. För att inte riskera isbildning under den kalla delen av året så måste luften värmas till en specifik temperatur. Om det bildas is som sedan lossnar och faller ner så riskeras skador på både människor och på utrustning i schaktet. En simuleringsmodell för anläggningen och en modell att använda vid regulatorframtagning tas fram.

In order to accomplish that a construction is correctly built, it is critical to obtain a well functioning control mechanism throughout the project. The way to enable this is not by having an independent inspector constantly at your side. Today it is praxis to use check lists and have people responsible of quality to make sure that these are followed. This is where discretionary inspections play their part. These among others are documents needed to com-plete the check list.

Problem: The authors have, during the process of development of this thesis, tried to create an understanding of how a number of organizations, all working with different approaches around the ?brand Sweden?, perceive the efficiency and benefits of using extended concept around embassies as a tool in their strategic work. The embassies in question have an evolved concept in the sense that they don not only hold a traditional political and legal role. The problem facing us authors was the issue whether theses embassies are efficient arenas to coordinate the forces and resources of the organizations concerned, in the mission to enhance the visibility and awareness of Sweden abroad.Purpose: The purpose is to describe the strategic work with marketing Sweden to be able to look in to whether the evolved concept behind the embassies in question are used as a tool in within the work of the organizations. We wish to research this to be able to evaluate if this arena is perceived as efficient for the organizations concerned.Method: In order to get a background to which one establish and communicate a nations brand the authors have studied literature within the subject.

AbstractThis report intends through a case study to investigate if lightweight concrete isappropriate as main material in the outer wall of a seven storey residential building.A technical design is carried out in accordance with the definitions and requirementsfor passive houses, given by FEBY?s1 ?Demand specification for passive houses?.A literature review is also carried out for a comparison between regular bolt wall andlight weight concrete wall, with a focus on the safety of moisture.The lightweight concrete block used in the report is as a celblock produced by thecompany H+H Sweden AB.The methods used have resulted in compliance with requirements andrecommendations from authorities. Calculations of energy, noise and moisture riskassessment has been carried out.The work has resulted in the conclusion that the lightweight concrete itself is notable to isolate in the extent necessary to obtain chosen U-value of 0,1 W/m2 ° C,without getting to thick. Therefore additional insulation is needed. There are fewrelevant reference objects built with only light weight concrete.

In a dynamic and unpredictable reality, either rigid structures or silo architectures areappropriate ways to organize an agile organization. This thesis enlightens these relationsbetween Service Oriented Architecture (SOA) and an organization who acts in a varied andconstantly changing business environment. In other words, this thesis enlightens the question:?How suitable is SOA to organize the enterprise who will meet a constantly changing andheterogenic business environment?.The thesis presents a model where an efficient organization must be agile to be able to actquickly in the business environments with constantly changing desires, needs, expectations,desires etc. According to the same model a Service Oriented Architecture organizes theenterprise elements such as processes, resources, competences, responsibilities, informationsystems etc.

A clean and affordable energy source for cooking is deficient in developing countries. People rely on fuels that contribute to environmental, social and health problems.Biogas is an alternative energy source and an increased investment in small-scale biogas production can in several developing countries be found. Several projects have started to use the technology in developing countries because of the benefits with biogas. Some cases in the establishment of biogas plants have succeeded and some have not. The study is a literature review supplemented by two field studies.