Emissions of insufficiently treated wastewater, mainly blackwater (i.e. wastewater from toilets), contributes to the eutrophication of lakes and seas. At the same time, blackwater is a fraction with a low content of heavy metals and, after sanitization, it can recirculate plant nutrients to arable land using the liquid composting treatment method. Liquid composting means that organic material is degraded under aerobic conditions. For sanitization, the blackwater needs to be treated together with energy-rich complementary material.

The Rya power plant in Borås produces district heating, district cooling and electricity. The plant is owned by Borås Energi och Miljö AB and is run by Dalkia Facility Management AB.In order to get the best heat exchange from the district hot water a pair of twin pumps and a turbine circuit pump are used as return pumps. Turbine circuit pumps are used to increase the pressure through the heat exchangers at the power plant. The pumps are in use when the flow is over 2 000 m3 h-1 and during the summer when re-cooling is used to improve the effectivens of the heat boilers.Since the pumps, that are parallel connected, rotating at a fixed rate per minute, the pressure is regulated with regulating valves. This report shows that during the 4,300 hours that the pumps where in use, energy corresponding to 590 MWh was wasted.

Today's unsustainable resource use is influenced by many factors. One key factor isproduction methods and patterns. Trough change of production patterns enterprises can bepart of the solution to a more sustainable society. This case study has analyzed environmentalperformance of the printer company Edita Västra Aros Ltd (EVA), who has gained awards forits environmental work, and what driving forces they have had during this work. The survey isbased on a qualitative method and the collected data consists of documents and staffinterviews, which have been analyzed with content analysis.

Stump biomass is energy rich and stump harvesting for use as fuel become more and more interesting in Sweden. Swedish Forest Agency (2009) has estimated that stump harvesting in Sweden would respond to an annual energy supply of 57 TWh/year. However, stump has not been recognized as a bioenergy resource in Sweden. Suitable methods for pre-treatment of stump are probably of great importance to make it accepted as fuel. It is therefore rewarding to carry out an investigation in this area for stump. This report represents results from a diploma project, which was aimed to develop a fixed bed reactor for experimental study of biomass torrefaction, followed by TG analysis and kinetic modelling employing Ozawa method and different kinetic models including one-step and three-pseudo-component models.

Housing cooperatives in Sweden practice very long depreciation times for their buildings and assets, subsequently depreciation costs are very low. This study aims at addressing issues relating to potential upward revisions of these costs and the revenue levels needed by housing cooperatives to address these changes, while also providing a detailed summary of some chosen financial ratios under different circumstances. This study's results are based upon recent (2015) market data within the Stockholm region, collected through a manual process and analyzed quantitatively. On average, housing cooperatives EBIT do not cover their financial costs and have low profit margins. The average depreciation time is considerably above what a technical evaluation by other sources may state.

When drivers overnight in the truck lots of electric energy is consumed by heaters, fans, lights and other extra equipment. If the engine is not running, this energy is taken from the lead/acid batteries of the truck which then needs to be recharged during operating hours. The fact that the charge acceptance of the lead/acid batteries is dependent on the temperature makes it hard to fully recharge the batteries at lower temperatures. A negative charge balance can lead to starting problems within a few days use in cold climate.In this thesis work, the effects of different battery charging concept are evaluated on the most common Scania battery (175Ah). A battery model is implemented in Matlab and some simulations of charging are made.

AimThe aim of this study has been to inquire into how the Swedish Golf Federation can make their implementation organization more efficient. The intention with the essay has also been to conclude with a proposal for organization structure for the Swedish Golf Federation. The questions of issue have been: How does today?s implementation organization look like? At which level and within which areas do the interviewees consider that the major problems are found today? How do the interviewees consider that the implementation organization should look like?MethodThrough a strategic selection in cooperation with the assigner the Swedish Golf Federation 15 interviewees have been chosen. The data collection has been executed in form of semi structured interviews.ResultsToday?s organization for implementation consists of one central function in Golfens hus with approximately 75 salaried employees, 21 district federations and 485 clubs.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The purpose of this study is to analyse how a distribution and sale-network for quality softwood lumber should be designed to fit sawmilling companies? business concepts, and at the same time satisfy customer needs regarding delivery time and quality aspects. This thesis work is a case study based on a sawmilling and retail company in Sweden. AB Karl Hedin is a private owned sawmilling company with 500 employees. The company?s turnover is 1500 million SEK, it includes 4 sawmills, 16 builders merchants stores and a packaging company.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

The purpose of this paper is to present and analyze the yearly expenses for Swedish rental apartments during the period 1999 to 2007. At the end, it will give the reader a general picture of how the cost-level has fluctuated depending on the production year when the apartment building was finished, and where the same building is located. This paper has the following questions as a starting point:- Can there be an identification of regions depending on where people tend to favor renting an apartment?- How are those regions distributed? That is, where are the cost-levels of the yearly rental expenses highest and where are the levels lowest?Nine statistical surveys from the Swedish government agency Statistics Sweden (Statistiska Centralbyrån) have been used as primary sources for this paper. These surveys deal with price pictures of housing in general, but for this paper the only information that has been used is the one about rental apartments.

In order to reduce the number of casualties and injured from accidents the rescue service must become more efficient and flexible. It is noted that far more people is injured and killed in traffic accidents than from fires. During the daytime the number of accidents in about three times higher than during the night, even so today the number of fire fighters on duty is the same day and night.Two computer models for simulation of different locations of the rescue services are used to determine the best options for placement of the rescue services. A cost-benefit analysis is also used to determine if today's fire stations are efficient for the society from an economical point of view.The results of the different models are that the fire station in Lund is misplaced. The number of ladders in Malmö can be reduced.

This thesis aims to identify the building integrated photovoltaic solutions available in the market with respect to general pros and cons of different systems and a technical description of there attachment system. Investigate and provide examples of various building integrated photovoltaic solutions in Sweden and describe the experiences and results of these projects.The methods used to obtain relevant information are interviews with individuals involved in significant projects and a thorough search of different solutions from solar suppliers.The conclusion is that solar energy is needed for a sustainable society. There are endless opportunities regarding BIPV, with many companies with different products and individual solutions. But so far it?s not so customary in Sweden.

The purpose of this study was to find possible explanations to why the studied herd had an increased incidence of abomasal displacements. The incidence of abomasal displacement in the herd was three times higher than the incidence of an average Swedish herd. The cows in this study were fed a total mixed ration. The different parameters studied were: energy content in food, nutritional content in food, body condition scoring, concomitant other diseases, and blood parameters of glucose, fructosamine, cholesterol, insulin, betahydroxybutyrat and free fatty acids. The author?s suggestions to decrease the problems are to decrease the energy content in the TMR to lower the cows? body condition scores in the dry period and changing the content in the TMR to increase the amount of NDF and adding structure in the form of chopped straw.

A large amount of our time is spent indoors in an artificial climate. To make the experience pleasant there are requirements on the ventilation and the heating system. At the present time the most common form of heating is a radiator system complemented with a ventilation system. A ceiling heating system with combined heating and ventilation can replace the two separated systems. The benefit with a ceiling heating solution is that it saves space since the radiator system is no longer needed.