Several scenarios point toward a future where we are far more people on Earth than today, where most of those people will live in cities and where oil no longer dominates in the transport systems and in agriculture as an energy source and where less energy will be available to us. The report investigates what areas in traditional ecological knowledge that can contribute to the transition that follows a future with less energy and establishes three areas with the potential of becoming important: areaspecific biological knowledge in societies that are more dependent upon its surrounding environment and its natural prerequisitesthe local management of these biological resources, which often means a fair sharing and sustainable handling of the resources and which has been observed in Nobel price awarded Elinor Ostrom?s researchthe world views that lie behind how the environment is considered and managed, world views that can inspire and point toward how we in the future should formulate world views that do not give the destructive modern management of the environment It is also noted that the magnitude of the city living in the future is a historical news and that very little research has been done in how traditional knowledge can be transferred into this kind of living..

Several technical solutions are ready to step forward as the new generation of propellant, and this report aims to explore the possibility of commercializing fuel cell cars. The report is based on current research and data from today's technology and engineering solutions that are estimated to be commercially realized before 2020.A mapping of today?s different fuel cell options has shown that the most suitable fuel cell option is the Proton Exchange Membrane Fuel Cell, which uses hydrogen as fuel. The report is focusing on a techno-economic well-to-wheel analysis of hydrogen and the energy balance and costs in a system perspective. The basis for this analysis consists of two centralized methods of production, steam methane reforming (SMR), and alkaline water electrolysis.

Wind power is one of the sources of renewable energy which has to be developed further in order to lessen our dependence on non renewable sources of energy. It's mainly oil and coal which have to be replaced by green energy. Wind power is already established in many countries, for example Germany, The United States of America and Denmark but it has to be continually developed and expanded to meet the needs of the growing energy consumption in the world. During the last few years many types of small wind turbines have appeared on the market. These small wind turbines are an alternative to the big wind turbines or power generators which demand huge sums of investment money.A new target group can now buy the small wind turbines in order to cover their own usage of electricity.

Organic material used for biogas production can also undergo other treatments. The emissions and impact from the different treatments are evaluated in this environmental assessment, with a focus on energy and climate. The materials included in the study are organic household waste, slaughterhouse waste and liquid manure. Other than biogas production, the possible treatments for organic household waste and slaughterhouse waste are incineration and composting, and for liquid manure storing and spreading. The analysis is based on data and information from current and relevant literature, and relates to the conditions in the Swedish energy system.

In this report the balconies? abutments for a property in Bo01-area in Malmö has been studied. The property which is called Vitruvius contains four build-ings where two of them have corbelling balconies with intermittent abutments. With intermittent abutment means that the 50 mm thermal bridge insulation that the balconies is equipped with, is broken regularly by a 300 mm concrete heel. The reinforcement bar that holds the balcony runs through this heel.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Sahlgrenska Academyat University of GothenburgDepartment of Internal Medicine and Clinical NutritionAbstractTitle: Artificial sweeteners in beverage and their effecton hunger and energy intakeAuthor: Sofia Andersson and Sofia JakobssonSupervisor: Heléne Bertéus ForslundExaminer: Anna WinkvistProgramme: Dietician study programme, 180/240 ECTSType of paper: Examination paper, 15 hpDate: April 11, 2012BackgroundIn 2010 the total consumption of soft drinks in Sweden was estimated to 69 litres per person and17 % of the domestic production was estimated to consist of soft drinks sweetened with artificialsweeteners. The effects of artificial sweeteners on hunger is not yet fully understood. It isspeculated that they might increase hunger and hence increase energy intake.ObjectiveThe aim was to compile the evidence regarding the effects of an intake of a beverage sweetenedwith artificial sweeteners compared to sucrose on subsequent hunger and energy intake.Search strategyA systematic search for literature was performed in the databases PubMed and Scopus.Selection criteriaThe inclusion criteria were RCT, human studies, articles published in Swedish or English, studieson healthy adults and studies measuring hunger with a subjective scale or energy intake. Theexclusion criteria were studies who measured energy intake under other forms than standardisedor controlled, studies without a standardised dose of the beverage and articles needed to beordered against payment.Data collection and analysisFour articles were selected and examined according to a template developed by SBU. Theevidence for each outcome was weighed together and graded according to GRADE based on asummarised evidence form developed by the Sahlgrenska Academy.Main resultsAll four articles measured subjectively rated hunger.

Samhället idag är beroende av energi för att fungera och att eftersträva utveckling av förnybar energi bör ha högsta prioritet. År 2013 produceras 81,6% av världens totala energi av fossila bränslen. Bostads- och servicesektorn står idag för 38 % av Sveriges totala energianvändning. På grund av att bostäder och lokaler står för så stor del av energianvändningen är det väldigt viktigt att ha noggrann koll på energiprestandan av byggnader och lokaler samt vilka energieffektiviseringar som kan utföras.Sörbyskolan är belägen i södra delen av Gävle och fastigheten ägs och förvaltas av Gavlefastigheter. År 2015 planerar Gavlefastigheter en renovering av Sörbyskolan och vill ta fram energieffektiviseringsförslag.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The aim of this thesis is to answer whether a group of databases dedicated to selling books or a group of databases dedicated to lending books is more efficient. The measurements used to determine the efficiency of the two kinds of databases are Cumulated Gain and precision in modified versions. The inquiry has been conducted thus that the same 18 queries have been put forth to six databases and these results have consequently been judged according to relevance on a 4-graded scale by five respondents. The rankinglevels have then been merged to one average value per respondent and ranking. These values have then been used to determine CG/iCG/nCG and P@n per query, rank 1-10, per database and per group (the groups being STORE (BUTIK) and LIBRARY (BIBLIOTEK).

The purpose of this thesis is to examine how investments are justified in the Swedish data center industry, with a focus on cooling equipment. This is achieved through semi-structured interviews with 20 different interviewees. These interviewees represent different facets of the industry and facilitate an understanding of which factors, such as: investment costs, operating costs, reliability, environmental impact and the influence of external and internal actors, come into play and to which degree they impact the investment decision-making process. The results show that primarily low operating cost in the form of low energy consumption is the driving factor when it comes to the procurement of new equipment. A lower environmental impact is a positive side-effect of lower energy consumption.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Given that the oil prices have risen and the environmental regulations has become more stringent, the interest in operating efficiency has increased. The project has investigated the possibility of producing electricity from waste heat generated in the diesel process. One technique to utilize and convert energy into electricity is the ORC (Organic Rankine Cycle). This process is based on the Rankine process (the steam process), the difference from the traditional Rankine process is that instead of water as a working medium, an organic substance is used. The main component used in the process is a evaporator, a turbine, a condenser and a pump.