This thesis conducted at the University of Uppsala investigateshow well a prefabricated building component from the manufacturerMasonite Lättelement AB can be incorporated into ahouse projected to accomplish the demanding criteria of a passivehouse. The thesis is organized as a comparison betweenthe prefabricated elements and an on-site built component fromthe passive house area of Oxtorget in Värnamo, Sweden. Theaspects investigated were air leakage, energy, moisture, economyand noise conditions.Results of the comparative analyzes shows that the prefabricatedproducts were capable of accomplishing the requirementsof passive houses and therefore this thesis should beviewed as a basis to confirm that the technology of prefabricatedbuilding components today in Sweden are mature enoughto be a significant part of the passive houses that are to be builtin the near future. The development of prefabricated technologyis of crucial significance if we are to accomplish the goalsof reduced energy consumption by the year 2020..

Today?s feeding methods can determine the domestic pig?s abilities to fulfill basic behavioral needs, such as foraging, and the way in which pigs are feed is an important aspect. Feed does not only provide the energy and nutrients critical for survival, but feeding is also associated with a number of other factors contributing to well-being and reproduction. Today the feed for gestated sows is often composed by high energy and low dietary fiber grain products such as wheat. Three kg of this kind of feed can often be consumed by the sow within 20 minutes.

Hemp is an old agricultural plant and has been used for hundreds of years for making textiles, ropes and other fibre products. In the middle of the last century the Swedish government prohibited all growing of hemp. Natural fibres were replaced by syntetic fibres instead. Today there is a newly awakened interest for using natural fibres from renewable materials. Growing of industrial hemp for fiber is allowed in Sweden again. I want in my Paper give Swedish growers an insight of which harvesting methods that have been tried in Sweden and how they worked.

Detta är ett examenarbete på grundnivå, 15 högskolepoäng. Examensarbetet är en energikartläggning med rekommenderade energieffektiviseringsåtgärder. Energikartläggningen är baserad på ett verkligt objekt vilket är en förskola i norra Gävle. Denna skola förvaltas av Gavlefastigheter.I Sverige går cirka 40 % av energianvändningen till bostäder och service. Därför finns det stora mängder energi att spara inom denna sektor.

pelago. There is an old inn that is located on the island that has become a very popular attraction in the last couple of years. The inn has both a well-known restaurant as well as conference facilities that are used by tourists as well as the people of Stockholm over the summer months. The inn was built 1908 and has since remained in the same condition.make islands in the archipelago more environmentally friendly and promote sustainability. One of their project islands is Grinda.

Gunsta is situated about 10 km east of Uppsala. Today there are plans to establish 1000 new households in Gunsta before year 2030. The required energy for heating houses and water would be distributed via a district heating system, which also includes 200 existing residences. The annual required energy, according to this study, would be 16.2 GWh with a maximal peak effect of 6.9 MW. To meet this need, the study suggests a system with heat pumps to upgrade the 31?C water from a 1.8 kilometre deep borehole.

Beef production in Sweden has traditionally been about rearing of dairy calves to slaughter. With reduced number of dairy cows and accordingly less dairy calves for slaughter, there has been a need for new forms of beef production in Sweden. In Västerbotten there are good conditions for beef production with a high feeding level of roughage due to favourable climate. The aim of this thesis is to, through interviews with ten farmers with beef production in Västerbotten, study what and with how much they feed their animals and link the results to production level. The thesis begins with a literature review where the general feeding standards and feeding recommendations for beef cows and growing cattle are examined.

AbstractMy purpose with this study is to find out if it helps children who have diffuculties with their concentration if they get to practise their motor behaviour knowledge during their day at the school to promote their learning capacity. My purpose is also to find out how schools works with motor behaviour training. To get answers to my questions have I done interviews with four educationalists and I have also used books and internet sites. Motor behaviour is of importance to how children learn things in the school, without a well working motor children gets difficulties to sit still and to concentrate. The children may put their energy at the wrong things in the classroom, when the energy instead should be need to learning things.

In this essay, we have compared a conventional house to a passive house. The housesshared the same local conditions; they have the same living area and the same layout. Thedifferences between the houses were the different construction solutions for the roof, theouter walls, the floor and the heating system. Both the houses qualify the standards fromBBR and the passive house also lives up to FEBY?s special conditions.The purpose with the essay was to examine if it really is profitable to build small hoses aspassive houses.

Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

Sweden has distinct seasons with cold winter and temperatures down to minus 25 ?C andpleasant summers with temperatures above 20 ?C. During spring and autumn there could becomechallenges with precipitation. The diverse climate in Sweden affects many homeowners. For thepeople living in leisure boats and permanent housing boats the seasonal changes are clearlyimpacting their economy and the indoor climate.

District heating covers around 80 % of the heating demand in apartment buildings and 10 % in single-family homes in Sweden. In the year 2010 the total input of energy to the Swedish district heating grids was about 70 TWh, which corresponds to 11 % of the total energy input to the whole energy system in the country. Through the combined production of heat and power the CHP-plants often reaches an efficiency of 90 % from energy in the fuel to produced heat and power. In order to keep the efficiency high it is important for the owners of the plant to have good knowledge about the plants performance at different operation points. Strängnäs Energi AB initiated this diploma work together with FVB Sverige ab in order to come up with a program for short term planning of the production of heat and power at the company´s CHP-plant.The work consists of three main parts.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

ABSTRACTMany wind turbines have problems with icing and there is still no effective method to de-ice without stoppage of production and power loss. Here I therefore consider other methods than those available today, and particularly, I consider how these methods could be applied to wind turbines of the company Oxel. A surface where the water droplets do not attach might be the basis for a useful method. If no water attaches, no ice could form. To accomplish this a hydrophobic surface is nessesary, for example wax.

 This degree project aims at developing a concept for how to use solar energy to pump up water. The target audience is people living in areas where the functioning of the electricity and water network is absent. In these areas, the hand-powered water pump is the most common technology. The degree project's goal is to find an economically viable alternative to the time consuming hand-powered water pumps. The power comes from solar energy.