The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.

The energy sector of modern time is currently faced with several challenges. These are both production oriented and environmental oriented in nature. The energy of the future is intended to support an increasing demand while at the same time reduce its environmental affection. This stresses a development towards production methods of renewable energy. Among the existing methods, biogas is presented as an attractive alternative.

The aim of this study about wind power planning in forest was to examine the factors and restrictions, which represent technical limitations, biodiversity, tourism and amount of energy for wind farms in Kronoberg County. Suitable areas for wind power were identified from the collected information about planning principles and potential conflicts. From the suitable areas the potential energy gain is calculated. Methods used were mainly a literature review, interviews with experts and practitioners, GIS analysis and a rough calculation of the energy gain. The section of information and facts describes in general wind power planning and possible conflicts.

Transfer pricing including internal loans have increased in recent years, making it easier for companies to minimize their taxable income. After the Swedish court case Diligentia, there have been discussions regarding the influence of a parent company's transparency and control of the subsidiary with regards to the interest rates on internal loans. In court cases that followed Diligentia, the Swedish Tax Agency argued that a parent company always could be assumed to have sufficient transparency and control of the operations in the subsidiary, and therefore reduce the risk on their debt obligations. This thesis seeks to analyze the effects of the transparency and control a parent company has with regards to interest rates on internal loans. The analysis is conducted by analyzing court cases similar to Diligentia.

Biogas is increasingly used for fuel in for example vehicles and it´s produced in a biogas processconsisting of the steps of pretreatment, digestion and gas cleaning. The pretreatment is a method usedto increase the gas production and / or destroy pathogens. The digestion is the stage when anaerobicmicroorganisms convert bio-mass of a substrate to a raw gas containing about 65% of methane. Thegas cleaning is used to increase the methane content to about 97% so the gas can be used for motors invehicles. The biogas part of the Ekeby sewage plant in Eskilstuna is using multiple substrates.

This study has investigated what makes a business relation satisfactory. The purpose is to distinguish the factors that are relevant to a functioning cooperation relationship between sawmills and DIY-stores. The theoretical framework is primarily based on long-term business relationships. The study is based on two case companies and their relations with wood-suppliers. - Case company 1 is a relatively new established and still growing company.

The purpose with this thesis is to analyse different factors that can explain district heating prices for energy companies in Sweden. We are further interested in examining if the prices is affected by the use of industrial waste heat in their production and the company?s ownership structure. The method applied is a multiple regression analysis using a panel data set of 50 companies over 5 years (2008-2012). The data used is yearly data obtained from the Swedish district heating association.

This report is written for a consultant networking company with the purpose to review the development ofthe company's remote connections from a user friendly and security perspective.This includes an investigation of the possibilities to consolidate existing authentication methods foraccessing customers. The problem lies in the amount of methods being used. Through case study wefound that smart cards, SMS-service, software and hardware tokens exist.The only method feasible from a security perspective is smart cards. Since the method is not commonlyused by the company's customers a standardization of it would be counterproductive.Also, the purpose of this report is to investigate how the ongoing internal development of the remoteconnection will affect the company's clients. Within this framework we have also verified a designsuggestion.We interpret, after the completion of the case study, that the internal development of the remoteconnection is marginally affected by legal perspectives.

The Swedish energy companies have several different systems for data collection of the energy consumption of their clients. Often computerized remote meter readers are put in practice in order to register the energy consumption of large companies. The majority of household clients, however, are read off by the assistance of manual methods. Household power consumption is read off once a year. As a result, these clients are not debited for their actual consumption; their invoices during the year are the result of estimations. At times when the electricity supply system is highly loaded, electricity is more expensive.

This case study's aim was to strengthen the state of knowledge about how horticultural companies in Sweden used railway transports between 1900s and the 1950s. Economic theories and a micro-historical perspective have been used to analyze the collected source material, and to describe Lindehult's market garden. The investigation is based on document analyzes, qualitative interviews, archive studies and literature studies to evaluate the sources' information through a source pluralistic method. The work has been based on historical source material in the form of payment vouchers, giving an insight into how the company's products were transported by rail across Sweden. Sture Hjalmarsson's diary and interviews have described the case and events that affected the company internally.

This study was performed to examine the performance of an equity based crowdfunding campaign, as well as seeking to describe the risks, complications and the opportunities that this kind of funding brings. The study was conducted by an empirical case study of a company that was about to initiate an equity based crowdfunding campaign.The conclusion is that the planning of an equity based crowdfunding campaign is time consuming and requires knowledge in many different areas. Therefore it is important to identify in which areas skills and resources already are available within the company, and where it must be obtained through a learning process.The report also highlights that equity based crowdfunding, because of legal restrictions surrounding the issue of unlisted shares, can not be marketed as other types of crowdfunding. This leads to the conclusion that those who invest in equity based crowdfunding do not necessarily belong to the crowd that crowdfunding is generally associated with. Arguments can be made that this crowdfunding model rather resemble traditional angel networks.A technical study was also made about the company's products.

This study was performed to examine the performance of an equity based crowdfunding campaign, as well as seeking to describe the risks, complications and the opportunities that this kind of funding brings. The study was conducted by an empirical case study of a company that was about to initiate an equity based crowdfunding campaign.The conclusion is that the planning of an equity based crowdfunding campaign is time consuming and requires knowledge in many different areas. Therefore it is important to identify in which areas skills and resources already are available within the company, and where it must be obtained through a learning process.The report also highlights that equity based crowdfunding, because of legal restrictions surrounding the issue of unlisted shares, can not be marketed as other types of crowdfunding. This leads to the conclusion that those who invest in equity based crowdfunding do not necessarily belong to the crowd that crowdfunding is generally associated with. Arguments can be made that this crowdfunding model rather resemble traditional angel networks.A technical study was also made about the company's products.

The purpose of this thesis was to investigate how an industrial company can increase customer value by offering added services to their core products. Theses added services can be categorized into the three different parts of the buying process. The company that was investigated is Smurfit Kappa Kraftliner in Piteå, a large international industrial company active on a business to business market. We have conducted a case study and made interviews with three respondents within the company. The result of the study show that the company offers value added services in each stage of the buying process.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

In recent years, moisture damages have been noticed in rendered, undrained stud walls. The design is built on the principle one-stage tightening which means that there is no air gap in the construction. The damages have occurred when water has permeated through the rendering in leaking connections and fittings for windows, doors, canopies, balconies, terraces and awnings. Behind the plaster carrier, which consists of either polystyrene or rigid mineral wool, plasterboard has often been used as a wind protection barrier. In many cases the wind protection barrier and the underlying wooden studs have been exposed to mould and in some cases even rot.