The purpose of this thesis is to investigate and clarify the facts surrounding one of Vattenfall's district heating plants; The "solar field" and associated rock cavern in Lyckebo, Storvreta. The plant was built in the '80s by the formerly municipal utility,Uppsalakraftvärme AB, as an experimental building. A ground water filled cavern would serve as seasonal storage of solar heat from an adjacent solar field. Since both the energy company and the facility itself has undergone major changes over the past 30 years, there was a great need to gather facts in order to provide a picture of its current condition and potential for continued use. The thesis investigates the plant's history and problems with the rock cavern losses, and how the operation developed. It also presents the calculations regarding the possibilities of again supplementing the facility with solar energy - which is not the case today - as well as the economic conditions for it. Regarding a re-launch of solar energy, primarily a concentrating solar collector has been studied, as it has the advantages of an integrated control system.

In this thesis we examine the relationship between board composition and firm performance in Swedish companies. The selection of companies includes all Swedish limited liability companies, with the exception of micro enterprises, that have been active between the years of 2009-2010. We develop hypotheses based on resource dependence theory, agency theory, and the resource based view, and test these with regression analysis against collected data. Specifically, we examine the effects of board diversity, outside directorships, and CEO duality. Our findings show that none of the theories provide sufficient explanatory power of the relationship between board composition and firm performance, and that further research is required to better understand the role and effects of company boards..

- ABSTRACT ?Title: Winners of the Web ( Webbens vinnare)Number of pages: 35 (including enclosures)Author: Lydia KellamTutor: Else NygrenCourse: Media and Communication Studies CPeriod: Fall Semester 2006University: Division of Media and Communication, Department of Information SciencePurpose: The aim of the research paper was to see Internet and the digital techniques impact on marketing communication and consuming behavior on the Web. By understanding the relationship between marketing communication and consumer behavior my intentions were to comprehend how consumer behavior on the web could be understand. The purpose of this paper is to understand how different marketing activities on the Internet are followed by consumption.Material/Method: By using focus group interviews I wanted to study how individuals act on the Internet. How different activities such as communication and participation on the web could lead to consumption on the Internet.

This study examines the eWOM effect, more specifically: how customer reviews effects consumers. The study is based on a modified version of the Regulatory Focus Theory which describes consumer behavior using consumer consumption goals. The purpose of this study was to examine how positive and negative customer review's influence consumers when analyzing products that are equally characterized by two consumption goals: promotion and prevention goals. The authors combined quantitative (questionnaire) and qualitative (focus groups) research methods with the sample selection for both research methods being based on students of Södertörns University. Results indicate that negative customer reviews have a stronger influence on consumers than positive customer reviews when analyzing products that are equally characterized by the promotion goals and prevention goals.

This report is written on the assignment by Nexans IKO Sweden AB in Grimsås which is a cable manufacturing company. Nexans IKO Sweden AB was in need of help to examine possibilities for saving energy by saving compressed air, in first place by using the compressed air more efficient. The task was to determine the present situation, making the airwipe stations more efficient by reducing the consumption of the compressed air and in turn save money. Even the aspects of the working environment were discussed as the noise levels from the pneumatic systems and engines are usually high. A schedule over the airflow in the factory and the inventory over current airwipessituation was made.

Incubators have grown more popular in recent years. Studies have shown that companies that have been part of an incubator grow faster and have a higher survival rate. The Swedish government realizes that this benefits the economy. Therefore they have started different funding programs in order to support the incubators. The thesis aims to explore the underlying reasons for why companies that have been part of an incubator often experience high growth.

AbstractThe future of ethanol is depending on good solutions for the production. ENA energy power plant produces electrical power and district heating by heating biofuel. By building an integrated bioenergy plant surplus steam could be used to produce ethanol as fuel to vehicle.This would mean that ethanol is produced renewable energy and the energy for the process derives from the surplus of power.  ENA energy, MDH (the University of Mälardalen) and the energy authority has initiated a research project were different bioenergy combinations integrate with existing power plant.  As a part of the project which size an integrated factory should be to gain the best efficiency for the plant was investigated. Consideration will be taken to the cost of the production in order to be competitive to the price of imported ethanol.  Etanolens framtid vilar på bra lösningar för framställning.  I ENA energi kraftverk i Enköping produceras el och fjärrvärme genom eldning av biobränsle.  Genom att bygga ett integrerat bioenergikraftverk där skulle man kunna använda överskottsånga till att framställa etanol som fordonsbränsle.

This master thesis is a study of the Swedish hydropower capacity to balance wind power. The Swedish government has decided that it should be possible to produce 30 TWh from wind power in the year 2020. The Swedish municipalities have to have plans for wind power plants with total yearly generation of 30 TWh. Wind power is an variable energy source that needs to be balanced by other energy sources. In Sweden the Swedish hydropower can be used for balancing a large scale introduction of wind power.

This study deals with Swedish nuclear-energy politics from 1980 to 2006. The purpose is to trace and to explain change and stability in three political parties? rhetoric concerning the phase-out of Swedish nuclear-energy and the Swedish government?s nuclear politics. Two hypotheses based on path dependency theory are tested to analyze if rhetoric and politics are developing in separate directions. The first hypothesis is based on the idea that earlier promises from the political parties affect what promises they can make later on.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

The purpose of this study is to compare the energy related and environmental consequences of implementing optical sorting as a means of waste collection with those of reducing food waste. In addition to studying the possibility of implementing optical sorting in downtown Stockholm, the yielded amounts of energy from waste collection and reduced wastage will be calculated. This is done by way of literature reviews and interviews. The amount of energy that can be generated through optical sorting and biogas production via anaerobic digestion in downtown Stockholm is 29-44 TJ/year, compared to 118 TJ/year saved by completely eliminating food waste. The generated biogas can replace fossil fuels, but the required food waste contributes to increased greenhouse gas emissions as well as reduced bio diversity and eutrophication during the wasted food?s lifecycle.

This report is focusing on problems with introducing standard enterprise resource planning systems (ERP) in businesses. A study has been carried out on a service and support department at a Swedish heat metering company, SVM North Node. The study aims to help the company become a better customer in choice and customization of a new ERP system. We make a description of the department studied and the work carried out there, on the basis of learning, knowledge and cooperation. As a final point we present some ideas on how computer systems could support their work, hoping that this will result in them making adequate demands on a new ERP system..

With increased deployment ofintermittent renewable energy, such aswind and solar power, energy storagebecomes necessary to help reduceproduction peaks. Thermoelectric EnergyStorage is a method still in researchphase, which stores electricity in hotwater at a temperature of 120 ° C. Thisthesis aims to examine whether theThermoelectric Energy Storage would bepossible to integrate into existingpower generation such as a combined heatand power plant, and how the technologypotentially could function in theelectricity market. ThermoelectricEnergy Storage consists of a chargingprocess and a discharging process, bothoperating by the working fluid CO2. Toincrease the efficiency of theThermoelectric Energy Storage, wasteheat from the district heating networkis integrated.A model of the Thermoelectric EnergyStorage has been developed and it wascalculated by thermodynamic propertiesof the working fluid, CO2, in thevarious process steps.

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.