In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

Transportation constitutes a large part of the forest industry's raw material costs. Transport also contributes a significant proportion of the carbon dioxide Emissions. In order to reduce both the cost and environmental impact different types of decision support are required. These, in turn, require extensive information about the road network and correct information on road path selection and transport distances. In the development of national road data base for forestry (SNVDB) a road selection application has been included.

To achieve the requirements to decrease Emissions of greenhouse gases by 20 % by 2020, Swedenneeds to increase its use of bioenergy. In doing so it seems natural that those who already haveaccess to large amounts of biofuels in the form of by-products such as straw, wood chips anddigestible materials take advantage of these assets locally. By combining production of heat withpower production at the farm it may be possible to not only reduce the direct use of fossil fuel forheating but also reduce energy costs.The purpose was to simulate different cases of using a small scale biofueled combined heat andpower plant for farm-based systems. A MatLab-model was developed and used to draw conclusionsabout the costs for production of heat and electricity with different conversion technologies.The model uses climate data to simulate the variations in heat energy demand on a day-to-day basis.The given heat demand is the base of the simulation and from this the possible electric output iscalculated. This study has focused on the impact of the following properties: electric-, heat- andtotal efficiency, fuel, fuel price and specific fuel requirements.

De senaste åren har utsläppsreglerna för sjöfarten blivit allt hårdare och under de kommande åren skärps de ännu mer. För att svaveldirektiven för sjöfarten ska fungera effektivt så krävs det också att de efterlevs. Syftet med den här studien var därför att undersöka hur länderna i Europeiska SECA områdena agerar och kommer att agera i framtiden för att se till att svaveldirektiven efterlevs. Studien syftar också till att undersöka hur efterlevnadskontroller genomförs, samt se om länderna har infört sanktioner mot överträdelser och vad dessa innebär. För att få svar på detta studerades lagar och förordningar, men framförallt skickades frågeformulär ut till de ansvariga myndigheterna i flera olika länder kring SECA områdena.

If one looks at physical planning in Sweden today one can see that while talking about densification of existing development, reduced Emissions and careful use of important land, urban sprawl is a fact with development of sheer residential districts in the urban edges and shopping malls in each and every municipality. As sustainable development is an essential goal for physical planning to strive towards, it is worth questioning if the direction of today?s planning will lead to the goal. A sustainable development can be seen as an obvious to goal aim at. In reality the aim means a hard and complex work.

The purpose of this study was to describe the possibility of implementing a lacto-ovo-vegetarian and organic diet in Eskilstuna municipality?s public preschool. Furthermore the purpose was to identify and describe the most important components involved in the implementation and their influence in the process.  The methods used were a survey based on a literature study. This study includes general information about meat production and consumption and also the use of pesticides in farming. It also brings up the environmental and health effects caused by the previously mentioned areas.

Resulting from anthropogenic carbon dioxide Emissions, average surface seawater pH is estimated to decline from today's approximately 8.05 to between 7.78 and 8.03 towards 2100. For ionisable organic pollutants, changes in pH can lead to a change in the degree of ionisation, which could influence the ecotoxicity of a compound by altering its bioavailability. In this study, potential changes in ecotoxicity of ionisable organic compounds resulting from ocean acidification are examined. This is achieved partly by conducting a literature review, analysing existing literature that investigates this relationship. Potential changes are also evaluated by examining marine ecotoxicity data for ionisable organic compounds on the watch list pursuant to Directive 2008/105/EC of the European Parliament and of the Council, as well as on the list of priority substances according to the 2022 proposal for amending the Water Framework Directive (2000/60/EC).

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

The level of cadmium (Cd) in Swedish arable land has increased during the last century and the average concentration of Cd in the plough layer is today 0.23 mg/kg. The increase is mainly due to anthropogenic activities such as phosphorus fertilizing, liming, import of feed, and atmospheric deposition from industrial Emissions. Cadmium in the soil will be taken up by crops and is thereby transferred to humans via food. Carrot is one of the crops of concern, both because it may contain quite high Cd concentrations and due to the large consumption in Sweden. In the body, Cd is stored mainly in the liver and the kidneys and may cause several diseases already at low concentrations.

During the year of 2008, a powerful earthquake hit the southern part of Iceland, which changed the geothermal conditions in the area around the city of Hveragerdi. Elevated soil temperatures in a nearby forest plantation have contributed to a unique opportunity for researchers to study how an increased soil temperature affects the boreal forest ecosystem, something that partly can be connected to the climate changes which are happening today. The boreal forest is representing a carbon sink and a buffert for the Emissions that occurs. Changes in this ecosystem will for that reason contribute to major impact for the global carbon cycle. To study the impact of how elevated soil temperatures affects different processes in a plantation of Sitka spruce, studies were made on the photosynthesis of the trees and the respiration from the soil.

As the cities are becoming more crowded, the urban distribution has become a major logistical challenge. Some commonproblems in the inner cities arelimited accessibility and idling. Many of Sweden's municipalities are above the limit values for PM10limit set by the EU.Sundsvall is one of these municipalities and has the vision to create a sustainable city and region. Sundsvall LogistikparkAB is part of an EU project, SMARTSET, which is collaborationbetween several cities in Europe. SMARTSETSundsvall is about to develop a market-based sustainable model for city logistics.

Australia is one of the largest producers and consumers of fossil fuels in the world. In a society where the effects of fossil fuels on global warming are constantly discussed, the nation?s production and consumption are subject to debate. Problems arise when negative aspects of consumption, such as Emissions of greenhouse gases, are put in relation to an increased need of energy and economic growth. However, it is important to distinguish between different types of fossil fuels when it comes to their individual impact on the environment and to analyze the possibilities to increase the more environmental friendly ones.

Today, about 15 to 20 percent of Sweden?s total emission of carbon dioxide can be traced to the household sector. By examining apartment blocks in a life cycle perspective, the origin of the carbon dioxide emission has been charted and analyzed. This information has been used to create a computational model that calculates the total emission of carbon dioxide from a specific apartment block. The results from the analyzed apartment blocks indicate that both the use of energy and the emission of carbon dioxide have been reduced since the 1960s. Through the examination of building materials, it is possible to lower the emission of carbon dioxide that origins from the construction phase of an apartment block.

Under 70-talet introducerades Positron Emissions Tomografi (PET) och på tidigt 90-tal påbörjades en planering av att kombinera PET och CT utrustning i samma hölje. PET är en metod som avbildar funktioner i människokroppen och CT, som står för computed tomografi (datortomografi) ger snittbilder av patientens anatomi. Detta ger på så vis en bild av både anatomin och funktionen. Det ger mycket viktigt information för diagnostik och planeringen av patientens behandling. Mycket förenklat kan man säga att en PET-CT undersökning går till så att det radioaktivt märkta ämnet, spårsubstansen, till exempel FDG injiceras intravenöst och sedan avläser kameran hur sockret tas upp i vävnaden.

This Master Thesis is a product development project that has been carried out in cooperation with Scania CV AB. The purpose has been to find the relationship between geometric parameters and the swirl number for an XPI- cylinder head in order to improve the design specification.The increased focus on environmental issues from society leads to tighter emission legislations for the truck manufactures. In order to drive the development forward considerable resources are spent on research and development on diesel engines and its combustion process. The inlet air has a significant impact on the formation of Emissions and the flow that is desired is called swirl. Swirl is achieved by making the air rotate around the vertical axis of the cylinder.Earlier cylinder heads that has been developed at Scania CV AB have shown clear relationships between geometric parameters of the cylinder head and the swirl number.