The environment has become an important part in people´s lives, and in today´s society stakeholders demands have increased upon companies when it comes to sustainability reports. How these sustainability reports are designed depends on whom it?s for, laws and regulations, and the companies own norms and values. The purpose of sustainability reports is to measure, monitor and compare a company´s enviromental impact. It?s not only about integrating economics, but also enviromental and social standards together to get both financial and competitive advantages.Sustainable Value method is a new model and is the first real method that can be used to evaluate a company´s resources, both financial, social and enviromental to a sustainable value.This model is used to compare the resource efficiency between companies.In this thesis, a documentary study with an experimental approach has been made.Sustainability reports from six selected companies (in the engineering and forestry sector) have been investigated with respect to their accounting for carbon dioxide, and an experiment using the method ?Sustainable Value Approach? was subsequently performed.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

In January 2005 the emission allowance system was introduced within the European Union and the first period ends at the end of 2007. The system was introduced in order to decrease the wastes of carbon dioxide and the system is a part of ratifying the Kyoto ?protocol which first period runs between 2008-2012.The idea of the system is to reduce the wastes of carbon dioxide where it costs less to do so and the expenses for the society therefore are as diminutive as possible. Different theories explain that companies can benefit from environment legislation and can depending on the company?s attitude gain competitive advantages improve its productivity and thereby increase its profitability.With this in mind, the study aims at examining how the introduction of the emission trade system has influenced Swedish smaller companies in the distant heating industry, with focus on the factors attitude, innovation, competition and profitability.

The Swedish household?s savings has increased the last couple of years, according to Statistiska centralbyrån. But the amount of households that trades on the stock market has decreased from the year 2012 to 2013. The diminished interest in stock trading carries a risk by leading to a smaller yield for the private savers, and also effect the business development and the economic growth. High brokerage fees will aggravate the ability to attract venture capital.

I denna uppsats presenterar vi en ny infallsvinkel på hur datatolkning i moderna organisationer bör hanteras, såväl praktiskt som teoretiskt. Studien genomfördes med ett kvalitativt och abduktivt tillvägagångssätt byggt på grounded theory med deltagande observationer och intervjuer med aktörer inom organisationen. Vårt teoretiska ramverk är byggt utifrån Carliles (2002) teorier om semantiska barriärer och påbyggda genom Iveroths (2011) tidigare forskning utifrån common meaning. Således är vårt teoretiska ramverk lämpligt för att tolka hur barriärer som hindrar en synkron datatolkning mellan olika aktörer i organisationer belysts i tidigare litteratur, hur dessa barriärer kan överbryggas samt olika synsätt på kunskapen som ett regelrätt mått.Avsaknad av kunskapskonsensus i organisationer grundar sig i semantiska barriärer för datatolkningen som måste överbryggas med sociala interaktioner. Organisationer går mot kunskapskonsensus genom att utifrån datakällan arbeta med ? i) teknologiskt medierade trading zones men även ii) socialt dimensionerade överbryggningsaktiviteter med målet att skapa kunskapskonsensus mellan och inom aktörsgemenskapen..

Deposited waste material degrades within a short period in anaerobic environments. The methane gas that is formed provides a harmful contribute to the greenhouse effect, 23 times larger impact than carbon dioxide. It is therefore desirable to minimize the emissions of methane gas from landfills. This may be achieved by drain the landfill of gas. In this thesis the amount of produced methane gas at the landfill at Örebro has been calculated. Estimations have also been made of the amount of methane gas that might be produced in the landfill in the future.

The number of data centers and their capacity is increasing throughout the world. Theenergy used in these data centers and the emissions from the use are increasing at thesame rate. The total use of energy will double from 2008 to 2011 based on the trends indata centers use. Research in this area says that the emissions from data centers willhave surpassed the level of airline traffic in 2020. The index used today to compare howefficient a data center is, called PUE, is lacking some information.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

The aim of my thesis was to do a Life Cycle Assessment (LCA) of an average thread tap that is manufactured by Dormer Tools AB, and to create a practical model that the company can use in order to study other thread taps from an environmental perspective.The method of LCA is used to investigate the environmental effects of a product during its life cycle. This is a gate-to-grave analysis with focus on steel and thread tap manufacturing, coating procedure, use, waste management and transports. Three common coating types were compared separately. Steel manufacturing answers for the highest energy and raw material consumption under the life cycle of the thread tap. Its emissions contribute to global warming, acidification and eutrophication above others.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area. The results show that use of locally installed renewable energy sources can reduce the total climate impact when life cycle perspective is applied.

The EU has decided that it should be possible for consumers to get information about the origin of the electricity they buy. Therefore, there is a need to examine different systems for electricity disclosure. In this thesis two ways of disclosure have been studied:? Certificate system. A certificate system involves two parallel markets, one for trading electrical energy and one for trading certificates of origin.? Separated Markets.

With the climate change issues growing in importance on the social agenda, the field of urban masterplanning is of no exception when it comes to minimizing the carbon footprint in a variety of projects. The aim of this thesis has been to prepare the Carbon Critical Masterplanning tool, a software plugin for carbon dioxide emissions assessment developed by Atkins, to be used in Swedish conditions. The main targets were to improve the areas of the tool associated with energy conversion and renewable energy sources, and to test the tool in a real case. A planned construction of a new campus in Albano, Stockholm was chosen for the pilot study. A 3D model was built in the tool and the carbon footprint was calculated for a variety of combinations for energy supply to the future area.

Background and problem: In the last few years the threat against the environment and especially the emissions of carbon dioxide has become increasingly debated. The government have set up a goal to lower the emissions of carbon dioxide with 40 percent until 2020 compared to the level in 1990. The emissions in the transportation sector have, in contrast to the total emissions, increased since 1990 and will continue to increase unless powerful control measures are implemented. The lorry centres have to use strategies to answer to these external threats which lead us to the two questions of this thesis: - What methods do the lorry centres use actively and which do they consider as the most important methods for fuel saving? - Are there any differences which methods small, medium and large centres considers as important? Purpose: The main purpose of this thesis is to examine which methods lorry centres use actively and which they consider as important for fuel saving.

By using steady-state measurements for predicting emissions under a dynamic drive cycle wouldsave a lot of time and money for the exhaust aftertreatment specialists at Volvo cars. The idea forthis thesis has been to investigate if statistical regression models can be used with good accuracy.Questions included are for example if common operating variables such as engine speed, air-fuelratio etc. is sufficient to predict engine-out emissions over the engine operating range with goodaccuracy. Focus was set on the modelling of warm engine, but also the more complex engineheat-up phase was investigated since it is a great contributor to total emissions. While NOxcouldnot be measured because of malfunctioning measurement equipment, only HC, CO andtemperature at inlet of first catalytic converter has been modelled.

Intresset för biobränsleproducerad energi har ökat i takt med att kunderna blivit mer miljömedvetna. På grund av detta har efterfrågan på briketter ökat samtidigt som träindustrin har haft det svårt i en sviktande konjunktur. Därför har ett examensarbete utförts i samarbete med E.ON Värme Sverige AB där undersökningar på bränslebyte i pannor avsedda för torra bränslen till fuktigare, stamvedflis har utfört.För denna undersökning har begränsningar införts på övre och undre effekt i form av uppehållstid och slutförbränningstemperatur. Intervallen är enbart beräknade på stamvedflis med 30 och 40 % fukthalt.Undersökning visar att det går bra att elda stamvedsflis i briketteldade pannor utan att emissionerna ökar så pass mycket att villkoren för anläggningarna överskrids om lasten hålls inom vissa intervall. Det möjliga effektintervallet ökar med minskad fukthalt på bränslet.Undersökningen har visat att det är bränslets kvalitet som är den mest begränsande faktorn..