Full-field flash electroretinography is an electrodiagnostic method used to examine the function of retinal cells. Light stimulation of the eye elicits electrical potentials in the retina. By aid of a corneal electrode and a reference electrode close to the back of the eye, the electrical potentials can be recorded and presented as an electroretinogram (ERG). ERGs driven by mainly one type of cones can be used to examine the function of a single cone class. In human beings, studies have shown the cone class sensitive to light of short wavelengths, the S-cones, to be more vulnerable to acquired damage than the other cone classes (Daley et al., 1987; Gouras et al., 1993; Greenstein et al., 1989). Dogs have two cone classes, S-cones, and M/L-cones (most sensitive to medium to long wavelengths).

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

???Information Technology is an essential part of the society today, not least in large ???organisations dealing with sensitive information. An example of such an organisation is the Swedish Armed Forces which indeed is in the need of ways to ensure information security in their Information Technology systems. The means which is used is an authorisation and accreditation process.All Information Technology systems go through a life cycle which includes realisation, usage, development and liquidation. In the Swedish Armed Forces the lifecycle is an authorisation process.

An ethnographic study loosely informed by the theoretical framework of distributed cognition was carried out in order to describe how mariners have adopted the Automatic Identification System (AIS) in their work practice, or"made the technology their own". AIS is a transponder-based identification and communication system that allows ships to automatically identify and track each other. In addition to facilitating the identification and tracking of ships, objectives behind the introduction of AIS are to"simplify informational exchange", and"provide additional information to assist situation awareness". Participant observation and interviews were made at four different ships, as well as at two shore stations. A focus group was also held at a maritime conference.

This report deals with the design of a controller for SmartMedia? flash memory cards, based on a hardware description found in the SmartMedia? Interface Library - SMIL. The design was made on logic gate level, using standard cells in OrCAD Capture. After simulation of the design in PSpice A/D, it was exported as an EDIF netlist, which was used to make a chip layout in L-Edit, a layout tool for making integrated circuits. The layout was made using a method called Standard Place and Route - SPR, where the layout tool places standard cells from a library and connects them according to the EDIF netlist.

I programmeringsvärlden har en ren, enkel och testbar kod en stor betydelse. Detta examensarbete avslöjar ett nytt koncept vilket kanske är den viktigaste upptäckten inom metodområdet på senare tid, så kallade Testdriven utveckling (TDD). Testdriven utveckling är ett sätt att utveckla mjukvara och det som utmärker den är att man först skriver ett test som inte ska fungera (röd fas), sedan skriver man en kod, så enkelt som möjligt, som gör att testet ska fungera (grön fas) och till slut ska man våga göra förändringar även om koden fungerar, om man är inte riktigt nöjd eller om man helt enkelt vill optimera sin kod (omstrukturera fas). Syftet med studien var att utvärdera vilka fördelarna och eventuella nackdelarna är med den här typen av mjukvaruutveckling, att motivera varför det är lämpligt att välja den och att visa hur man gör med hjälp av Java, JUnit och Eclipse. Material som användes i studien insamlades genom litteratursökningen och intervjuer.

The background to this thesis is the impact of information technology on libraries and librarywork. If information technology causes changes in the tasks and work of libraries, thenlibrary organisations should also change. It is important to engage and inform the staff if suchchanges are to succeed. This thesis investigates the notions about library tasks and librarywork among eight "middle-managers" at Linkopings universitetsbibliotek.The investigation is based on interviews and then analysed with Soft Systems Methodology(SSM). By identifying the "Weltanschauung" of the staff, the thesis tries to create logicallydesirable and culturally feasible models of systems relevant to the situation at Linkopingsuniversitetsbibliotek.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

The purpose of this paper is to find out how visually impaired people get information on Internet. Visually impaired people has got the right to be able to use the Internet like everyone else. We are also going to revise which aids visually impaired people use today, and how they work in practise. What problems can you run into when you use these aids? We are also going to revise how the webpages design affect the use of the Internet for the visually impaired people.

The  construction  industry  is  a  costly  business  such  in  respect  of  capital  for  most construction defects which then require rework, tear down and rebuild again. This study is  meaningful  awareness  of  tools  that  can  reduce  this  best  through  communication  and information sharing between the parties.  The  construction  industry  is  known  as  temporary  projects  organizations,  where  the construction  project  consists  of  several  actors  who  have  to  communicate  and  share information  between  them  to  avoid  mistakes  later  in  the  build  time.  These  actors  are bounded together thus for the duration of the project, then broken when the project has reached its end. The challenge here is for these actors to apply a tool that can help and simplify communications, information sharing, and perhaps the most important aspect is to  create  a  routine  for  the  association  and  the  shattering  of  these  actors.  To  implement such  behavior  using  a  tool  such  as  BIM  in  the  industry  whose  size  perhaps  is indescribable may be a very hard task.  BIM (Building Information Model) could be seen as the solution to this problem because it  acts  as  a  portal  where  the  actors  involved  must  sign  in  and  communicate,  share information, and eventually create a behavior, a routine for this association and division of  the  actors  following  the  end  of  the  project.  The  technology  could  help  the  involved from  the  beginning  of  the  project,  already  in  the  model  stage,  break  down  and  prevent any construction barriers when the building has been placed in the works.

There has been a sharp increase in high-technology surveillance. Surveillance is almost alwaysproposed as a complete response on a wide variety of safety issues. At the same time, there has beenan increase in criminal activity online. There is therefore a considerable interest in using Internetfiltering to regulate the behavior of individuals on the Internet. In recent years, many countries havechosen to restrict content on the Internet, where child-abusive material is the content that moststates currently block access to.

The development of applications for mobile devices has exploded in recent times. This has also led to the introduction of several new mobile operating systems. To streamline application development for multiple platforms, techniques have been developed to be able to reuse the same application regardless of the operating system. If the same application can be used on multiple platforms it will save both a lot of time and money. Today there are three types of techniques to develop an application; web, hybrid and native application, where the latter is specific to the operating system it has been developed to.

Hammarby Sjöstad is a new district in Stockholm with high environmental standard. Stockholm Water Company evaluates a local wastewater treatment plant with cutting edge technology. The first step is an experimental treatment plant (Sjöstadsverket) with four parallel lines of treatment, each with a capacity to treat wastewater from 150 persons. Within the membrane technology subproject the possibility of using reverse osmosis (usually called RO) to regain nutrients is examined.Reverse osmosis separates the incoming water in a clean permeate and a concentrate that, as the name indicates, is a more concentrated version of the incoming water. Using this method in wastewater treatment, a solution high in nutrients can be obtained without the use of chemical precipitation agent and with no production of sludge.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.