This study examinates technology's traumatic impact on the male subject in The Atrocity Exhibition by J.G. Ballard. In my analysis I show how the protagonist uses a fetischistic strategy in order to make sense of the trauma that technology embeds. Paradoxically it proves to be the agent of his trauma, but also functions as his shield. The machine is thus in a position of the hinge, the point in a structural system that both enables and deconstruct the system.

The ?civilized? world is in need of fossil fuel in order to function. Hybricon AB is a company in Umeå that is developing a technology that hopefully can reduce parts of this need. They are currently testing their two electrical busses (with Hybrid backup) in city traffic on the roads of Umeå in cooperation with the county of Umeå.                               The busses are originally diesel-busses, but the diesel motor has been replaced with two electrical hub-motors with a power of 145 kW each that are powered by batteries.The batteries are charged at the end station after each route. In case the batteries should run low on capacity during driving, they can be recharged by the so called genset.

Today electronics becomes more and more complex and to keep low costs and power consumption, both digital and analog parts are implemented on the same chip. The degree of automization for the digital parts have increased fast and is high, but for the analog parts this has not come through. This have created a big gap between the degrees of automization for the two parts and makes the analog parts the bottleneck in electronics develop. Research is ongoing at Electronics systems group at Linköping University target the increase of design automization for analog circuits. An optimizationbased approach for device sizing is developed and for this a good optimization method is needed which can find good solutions and meet the specification parameters.

A vehicle that carries a person sitting in a wheelchair has been rebuilt. The original vehicle was provided with a petrol engine, hydrostatic drive and a mechanical steering rod, making it noisy and hard to maneuver. The purpose with this project was to convert the vehicle to make it more environmental and easier to drive.A new design has been proposed where an electrical drive has replaced the noisy combustion engine and an electrical motor with joystick control has replaced the manual steering.The project was divided into two parts. One mechanical part where the construction of the drive and steering were to be decided. The other part involved programming the microprocessor and implementation of all the necessary electrical for the control system of the vehicle.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

At nuclear power plants, electrical valve actuators are important for ensuring that the reactor core is water covered and the pressure in the reactor tank and containment is limited. The electrical actuators are provided with overload protection in case of drawing higher current then the motors are rated for. When safety manoeuvres are needed, the overload protection must not trig and cause the valve to stop before completing the manoeuvre. Analyses have showed that the current settings of the overload protection may cause an illegitimate trig at the worst theoretically possible accident. A new method has been developed with conservative assumptions and applies overload protections for all electrical valve actuators at the three reactors in Forsmark..

The use of technology in today's society is frequent and often necessary, but how, when and where are we supposed to learn how to use it? And if it is such a big and important part of our society, then why don?t teachers get more training in how to use the technology? The purpose of this paper is to examine whether teachers attitudes to technology affects their use of technology in their teaching. In school technology can be a complementary to other material, if teachers have the necessary skills to use technology in a pedagogical way. I have chosen to do a qualitative study in form of interviews and observations at a school outside of Stockholm. The results show that both school and teachers must want to work with technology if anyone will be getting something out of it.

The use of technology in today's society is frequent and often necessary, but how, when and where are we supposed to learn how to use it? And if it is such a big and important part of our society, then why don?t teachers get more training in how to use the technology? The purpose of this paper is to examine whether teachers attitudes to technology affects their use of technology in their teaching. In school technology can be a complementary to other material, if teachers have the necessary skills to use technology in a pedagogical way. I have chosen to do a qualitative study in form of interviews and observations at a school outside of Stockholm. The results show that both school and teachers must want to work with technology if anyone will be getting something out of it.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

AbstractThe purpose of this study is to see how technology is presented in different fictional picture books that are available in preschool. Six fictional picture books that have connection to technology in picture and text have been analysed. In order to show how technology can be made visible in fictional picture books, the relation between picture and text has been analysed through a technology perspective. Furthermore, the pictures and the texts have been analysed separately in order to show what they show respectively in terms of technology. The fictional picture book has a potential to be a basis for making technology visible in preschool, which is a step in a new direction.

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

AbstractThe purpose of this study is to see how technology is presented in different fictional picture books that are available in preschool. Six fictional picture books that have connection to technology in picture and text have been analysed. In order to show how technology can be made visible in fictional picture books, the relation between picture and text has been analysed through a technology perspective. Furthermore, the pictures and the texts have been analysed separately in order to show what they show respectively in terms of technology. The fictional picture book has a potential to be a basis for making technology visible in preschool, which is a step in a new direction.

Abstract: This report covers primarily the work of documenting electromagnetic fields generated by one of the later parts in the electrical power distribution chain: The electrical substation, wherein 10 kV is transformed to 400 V for use by private consumers. Thus it is one of the most widespread and frequently occurring parts in the Swedish power grid and of particular interest, as electrical substations are found everywhere in populated areas, often in close vicinity to people and animals.The report deals with a number of formulated questions and/or hypothesis? stated at the onset of the work undertaken, theory that is relevant for the topics the report covers, the details of the field work undertaken and the following analysis of the readings, which in term provide answers for the questions stated in the beginning. It also covers what is the currently known short term and long term risks associated with electromagnetic fields in the power frequent spectrum and of varying intensity in the vicinity of humans.The analysis also provides recommendations and identifies several points to carefully consider when planning for new installations or replacements of some parts of existing installations.For enhanced reading comprehension there is, aside from sections with pictures and attached explanatory texts and templates, several graphs, one-line diagram and maps of the power grid among the appendixes to the rapport..

This work is about collaboration and staining in the upper secondary school Electrical program. How should the coloring go to in order to increase students' motivation and thus facilitate students' learning is the main subject with the work. The study has shown that there is a functional co-operation today, and that students believe that if the cooperation would increase. It would also in-crease their motivation to improve..

Leisure boats of today have a lot of electronics that needs battery power to work. In additionto that electric propulsion systems have gotten more popular lately, which further increasesthe demand for high battery capacity. The batteries used are mostly lead-acid batteries and toget the most out of the batteries it is important to treat them right. To optimize the electricsystem it is important to have knowledge of how the batteries and the electric motor are usedand which factors affect e.g. efficiency and recharging.A new electric drive that can replace old diesel engines is being developed and needs testingand evaluation.