The purpose of this thesis work was to develop an automatic fault detection system for surveillance of bearing temperature in hydropower turbines. The parameters used except the bearing temperature were cooling water temperature and cooling water flow. A simple static model based on data sampled every minute was developed to estimate the bearing temperature. Then a detector for detection of change in bearing temperature based on the CUSUM-algorithm was designed. Since the amount of data was very small the developed model was too uncertain to be used in a working system.The designed fault detection system showed to work well for the available data.

Volvo Construction Equipment i Braås är världsledande inom tillverkning av ramstyrda dumprar. I Braås utförs därför en mängd olika testfall där man kartlägger utfallen genom insamling av data från CAN-bussar i dumpern. Om ett test går fel beskrivs det i en felrapport med tillhörande beskrivning av händelseförloppet. Idag finns det inget enhetligt sätt att visa händelse ihop med position.För att analysera insamlad data används idag CANalyzer. Fördelen är att det går att visa insamlad data på ett strukturerat grafiskt sätt.

This master thesis was made to validate hydropower models of a turbine governor,Kaplan turbine and a Francis turbine in the power system simulator ARISTO atSvenska Kraftnät. The validation was made in three steps. The first step was to makesure the models was implement correctly in the simulator. The second was tocompare the simulation results from the Kaplan turbine model to data from a realhydropower plant. The comparison was made to see how the models could generatesimulation result that was similar to the reference power station.

Datorspelsbranschen är en relativt ung bransch, både jämfört med andra delarav mjukvaruindustrin och nöjesbranschen. En av de stora utmaningarnaspelutvecklare står inför är planeringen av den långsiktiga kompetensförsörjningen.Dock saknas sammanställda historiska data och applicerbararesursestimeringsmetoder, vilket gör detta arbete näst intill omöjligt. Det förstadelmålet med den här studien är att samla in historiska data angående strukturenoch storleken på utvecklingsteam som utvecklat AAA-spel (professionelltutvecklade spel med en hög budget) för pc-datorer. Datan samlas in frånkreditlistor hämtade via webbsidan Mobygames.com. Det andra delmålet beståri att utreda huruvida den insamlade datan kan appliceras på modeller förestimering av framtida personalbehov.

Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

The last few decades the development in the field of electronics has been huge. The components performance gets better at the same time as the manufacturing cost decreases. Many of the design moments that have to be done, are done automatically today, but it can get better. Especially for analog circuit design.At Electronic System in Linköpings universitet, research is in progress to develop a tool that can design analog circuits in reasonable time. It means that it has to size the components (transistors, resistances, capacitances etc), so that the circuit can fulfill the performance requirements.

The thesis mission is to investigate whether the swiveling laser that Vectura (former Vägverket Konsult) has in use to measure the road areas and straddle measuring can be used to detect differences in the reflective road markings function. This is to increase use of the swiveling laser and get rid of the manual measurements performed today.Currently, the measurement of road markings reflective function is performed with both mobile and handheld measuring instruments. The purpose of this thesis is to develop better methods for determination of road markings? reflective function, in order to facilitate the description and suggestions for improvements of the maintenance of road markings reflective function.The questions that the thesis has been to start with are:Can the swiveling laser detect differences in longitudinal and transverse road markings reflective function?The accuracy of measurement has been sweeping the laser over the reference instrument (LTL-2000)Is it necessary with a conversion factor for swiveling laser data against the reference instrument data?To answer the question 2 and 3, there has been a field work in Värnamo where a road stretch with longitudinal road markings and zebra crossing (transverse road markings) has been investigated with a swiveling laser and LTL-2000.The formulas and calculations contained in the thesis are drawn from scientific reports that are produced by VTI in Linköping. The same formula that was used to calculate the optical measurement data was also used for the swiveling laser data.

This thesis aims at examining to what extent a few, algorithmically very easily extractable document features can be used to classify electronic documents according to genre. A set of experiments is therefore carried out, using only 11 such simple features in an attempt to classify 84 documents belonging to electronic academic journals into three manually identified genres: table of contents, article, and review. The 11 features are also divided into three sets, containing metrics of words and sentences; punctuation marks; and URL links, respectively. The performance when using these sets of features is then measured with regard to classification accuracy, using a k-NN classifier, four different values of k (1, 3, 5, 7), and both leave-one-out and 10-fold cross-validation. Best results are achieved when using all three feature sets (i.e.

Thinning is one of the most important silvicultural activities in middle aged forests, partly to minimize damages and partly because it leads to earlier harvesting revenues and increases the value of the remaining trees. There are many different indices used to describe stand density and thereby the need of thinning in forests today. Studies have shown that forest variables can be estimated with high accuracy using airborne laser scanning and it is likely that the method could also be used to estimate forest density indices. In this study, the possibility of using the forest density index ?H² to determine and map priorities for thinning operations for a forest area was examined.

The aim of this thesis is to accomplish a user study on how e-book users experience the electronic book, the e-book, as an instrument for reading fiction. The study is based upon qualitative interviews with twelve e-book users and a small survey carried out at the Stockholm City Library. The purpose is to identify the users' incentive for choosing the e-book as a medium for reading fiction, elucidate if and how the interface of the e-book affects the reading experience, and distinguish if there are any factors common to the users in their choice of reading e-books. How the users look upon the future of the e-book is also discussed. Among the people asked in the survey we note little if any demand for the e-book as an instrument for reading fiction.

Metadata är en viktig del i arbetet med geografiska data. Med bra metadata kan användaren på ett enklare och effektivare sätt hitta de data som är intressant för just honom eller henne. Länsstyrelsen i Västmanland har stora mängder geografiska data och beslutsdokument som rör geografiska områden. Dessa geografiska data och dokument lagras på servrar och är tillgängliga för handläggarna (användarna). GIS-gruppen har tidigare lagrat metadata för dessa geografiska data i en databas uppbyggd i Microsoft Access men en nyutvecklad metadatabas, GisMeta, ska börja användas.

This reports purpose is to give a general view on how to handle information collectedthrough photogrammetry and laser scanning with the help of UAS. The report ismade in collaboration with WSP Group and will briefly describe howphotogrammetry and laser scanning, also known as Lidar, works and how those areused in the construction business today. Then the focus will be on how gathered datais handled today, how outsourcing of data should be approached and if there are anyconsequences if data is handled in the wrong way. Interviews have been made with allparts in the UAS business. That includes authorities as Transporstyrelsen,Försvarsmakten.

Development and construction of an electronic Breakout box is the main work for this thesis. The box is a part of a test system for the component Fuel Flow Transmitter and should convert signals to be suitable for a frequency counter. A previously constructed Breakoutbox for this purpose is being old and needed to be recreated. So SAAB Aerotech, Aircraft services, the company for the thesis work wanted to construct a new, more sustainable Breakoutbox adapted to a more modern technology. The signals to the box comes from the transmitter and should be converted to suitable signals for a frequency counter so it can show pulse and time difference between the signals.

A multivariate cross-sectional model is used in this thesis to proxy for expected earnings and to estimate return on equity for 214 companies over the period 2009-2013, using Swedish data. The model, which has never been tested on Swedish data before, is first confirmed to function as a forecasting model for expected return. Furthermore, the model is evaluated through a comparison with two univariate models based on the assumption that return on equity follows a mean reversion process. Forecast accuracy is calculated as the difference of estimated returns and actual returns. The results show that the univariate models' forecasts are superior to the multivariate model's..

This report is on concrete work during the winter and is implemented on Peab?s behalf. The assignment was to describe the differences between a summer- and a winter casting. While it shows the complications that exists, it also show what aids are available, both electronic via computer and physical aids.The information that I have developed is originally from theory in books, information on the internet as well as practical experience from knowledgeable people that works in construction output. Other theories are those I have learned throughout the education to become a construction engineer, including all oral sources over the years.The results I have come up with, I hope will be able to help future construction projects in the planning phase of a winter casting.