Being able to predict the future had been an invaluable competitive advantage for any corporation. Forecasting is a vital part of any business, hence a good forecast allows enterprises to invest in a beneficial way. However, there are several ways to prepare forecasts and the forecast methodology can vary. An industry that is dependent on forecasts is the energy industry. By predicting consumers' energy consumption, Swedish energy companies can hedge on the Nordic power market Nord Pool.

Since energy simulations are used to verify that projected residential buildings will reach the current energy requirements it is important that the results are reliable.This report investigates the extent of uncertainty in energy simulations, estimates the causes of the uncertainty and its economic and environmental consequences.The method used in this report is based on three validation methods; empirical validation, analytical validation and comparative validation. The analysis was carried out for five multi-family dwellings in Uppsala with installed meters for energy measurements. One of these objects, Klockarlunden, was studied in more detail than the others.The results show that the deviations are between 10 and 29% for the studied objects, which means that the uncertainty is estimated to be at least 29%. All simulations underestimate the buildings need of energy. The simulation for Klockarlunden can predict the energy consumption to be within the range of 46-98 kWh/m2year with 90% confidence level based on the current uncertainty.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.

The gas turbines in the Swedish secondary reserve are reaching the end of their technical lifetime, hence alternative solutions need to be considered. One of the solutions thought to have the greatest potential is the use of so called consumptionreduction. By entering contracts with large consumers, agreements are made to reduce consumption in the event of major disturbances in the power system and thus being used as a secondary reserve. This thesis investigates the feasibility of consumption reduction as part of the secondary reserve. This has been achieved by developing a requirement specification for the disturbance reserve and by studying the technical and economic potential for consumption reduction among a range of consumers.The technical potential for consumption reduction that fulfils the requirements for participating in the secondary reserve are on average 750 MW in SE 3 and 98 MW in SE 4.

In today's society, the availability of energy plays an integral part in our everyday lives. Unfortunately, the price of energy in Sweden has increased in recent decades. A large part of our energy consumption goes to heating modules for houses, where heating methods that depend on energy sources such as Electricity, district heating, fuel oil, gas and biofuels are the most common ones. During the winter period, the increase in energy costs becomes significantly evident, especially for small property owners. This increase in energy cost is most noticeable for home owners with electric heating.This thesis is written at the Halmstad University, in cooperation with a company, which makes parts of this thesis confidential.

This report is made as a literature review, focusing on the work done to increase understanding of efficiency in the categories of substations and secondary heating systems, with respect to the deviation from the theoretically possible cooling off in the distribution network as well as the economic benefit that appear. The main purpose of a considerable part of the literature used in this report addresses the issue of identifying individual causes of reduced cooling in district heating systems. These literature resources have been compiled and summarized as part of the report.The technology of district heating is associated with benefits such as better use of the energy in a fuel. This is the case of cogeneration plants where serial generation of Electricity and thermal energy increases efficiency compared with the parallel generation where heat is generated locally and Electricity is generated centrally. Serial generation thus allows for lower primary energy demand.

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

In this paper we have theoretically built a house designed for people with impaired mobility. Theessay begins with an introduction in which the purpose of the work, the methodology and thedepth-research part is presented. Then the layout that explains how we intend to adapt the housefor the demands detailed in the depth-research part is presented. In the same chapter variousstructural components, such as different floors and walls, are specified.In the selection of materials we have taken into account the criteria of our specialization andadaptation to the aesthetic aspects, where we evaluate materials based upon our wishes regardingtechnique and form. There are also other aspects that are important in the selection of materials,including that these are adapted to technical traits of the construction elements and installations.In a later chapter the technical installations such as ventilation systems, heating systems,Electricity and sanitation are presented, where both technical and financial aspects are describedin detail.

This candidate.?s work includes designing of a house with it.?s structural components andinstallations. The house had to be actual with Building Regulations (Boverkets Byggregler).Beside designing of all the crucial systems necessary for completing of claimed regulations evenan optional topic within building engineering had to be chosen.The task included designing of heating, ventilation, sanitation and Electricity systems. Structuralengineering models has been made in compliance with Eurocodes. Materials for facades, floorsand roof were chosen and evaluated.As recessed portion of the work, evaluating of possibilities in designing of a glass roof waschosen.

The energy consumption in the sectors of residential and public buildings is 40 % of the total energy consumption in Sweden. The main part, 85 %, of the energy use in these sectors is for operation of the buildings. The rest is used in the building process. When energy-efficiency measures are taken the energy use during the operation time decreases and the fraction of energy consumption during the building time increases. This project is carried out in cooperation with JM AB and concerns the energy use during the building time of production of blocks of flats at the building site.The main part of the Electricity that is used during the production of apartment buildings goes into the heating of portacabins and illumination of the building during the construction phase.

Problems with the current energy system, which partially relies on non-renewable fuels, are increasingly recognized. Emissions of greenhouse gases from fossil fuels may speed up global warming, which in turn leads to a number of negative consequences. Nuclear energy is risky and relies on consumption of a scarce resource. This leads to a demand of renewable energy that is also economically feasible. One possible renewable source of energy is solar energy.

Intelligent IT-based solutions, often called Smart Grids, are considered to be the future balancers of renewable energy sources. One area within the Smart Grid concept is called demand response, which is focused on making customers more consumption flexible by making them more active in their consumption. In this thesis the aim is to analyze a business model by investigating the income potential for a demand response solution as well as its market potential. This has been done through literature studies, interviews and development of a computational model.The use of 5000 households with flexible consumption can provide a cost reduction of 17.2% or 2.4 million SEK for a balance responsible party during an average year. If the solution is used to make strategic bids on the regulation markets the study indicates that the largest potential for revenues lies within this strategy.

The aim of this study was to investigate the possibility of performing inter-species embryo transfer under actual field conditions in the natural habitat of South American camelids. In this study embryos from llamas were transferred to alpaca recipients. In a parallel study alpaca embryos were transferred to llama recipients. All animals used were free of uterine and ovarian abnormalities detectable by rectal palpation and /or ultrasound examination. Embryos were harvested twice after single ovulation in 10 mated female llamas and non-surgically transferred to synchronized alpaca recipients.

With increased deployment ofintermittent renewable energy, such aswind and solar power, energy storagebecomes necessary to help reduceproduction peaks. Thermoelectric EnergyStorage is a method still in researchphase, which stores Electricity in hotwater at a temperature of 120 ° C. Thisthesis aims to examine whether theThermoelectric Energy Storage would bepossible to integrate into existingpower generation such as a combined heatand power plant, and how the technologypotentially could function in theElectricity market. ThermoelectricEnergy Storage consists of a chargingprocess and a discharging process, bothoperating by the working fluid CO2. Toincrease the efficiency of theThermoelectric Energy Storage, wasteheat from the district heating networkis integrated.A model of the Thermoelectric EnergyStorage has been developed and it wascalculated by thermodynamic propertiesof the working fluid, CO2, in thevarious process steps.

This examination work brings up opportunities to invest in a construction for heating with grain or pellets on farm level. As example we have chosen Fröberga Gård which is a farm located in Östergötland outside of Söderköping. The farm`s residential buildings is to day heated with oil and Electricity. The result of our investigation shows that heating with grain is the best alternative, partly because of economical issues but also because you can grow the grain on your own farm and by that you can get better economy in your seed cultivation. To grow 16 tonne of grain as is needed demand gives a insignificant increase of work. Further an advantage is that no investment in machines is needed because all the machines witch is needed already is in use on the farm. In a situation where a new investment is needed as in the case we studied, is it often profitable to invest in a integrated furnace. Because all the components are well adapted to each other, and because that gives a high efficiency. If you already own a well working furnace is it often most profitable to connect a burner to it. It is important to know that heating with grain need more work than heating with pellets, because the high contents of ash in grain. Even if you choose pellets instead of grain the calculation shows good results. Because peat is an excellent but fairly untested raw material for pelletsproduction we have chosen to watch little more on its quality and conductions. We discovered that peat has a high heating value which makes it possible to raise the heat value in pellets through mix up peat and wood. Or you can make pellets with only peat and get a pellet with high heating value. Even the calculation with peatheating shows good results..