The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

In this report a study has been done regarding different heating systems on which are the mostcomprehensive with solar heating systems. The report has also been focusing if solar power can beused as a primary heating source for supplying more than 50 % of the buildings total heatingproduction. The University of Dalarna constructed a demo-house for this purpose and according tocalculations the total solar usage is more than 50 %. This house has been made for referenceregarding the design of the heating system of property 5:37.Further studies have been made to compare different heating systems that are compatible with asolar system, where the compared systems purpose is to be independent of direct using electricity. Asystem of this design is regarded as sustainable according to environmental as economic issues.

Background: In our case study we have been studying a company that during the last seven years have tried to implement the control system Balanced Scorecard. They have during this period made three attempts. According to Kaplan and Norton, the creators of Balanced Scorecard, it should take about 16 weeks to implement a Balanced Scorecard. Purpose: Our purpose is to investigate which factors that influence the possibility to implement Balanced Scorecard. Method: We have conducted a case study where we have studied implementation at three levels in a company.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

The focus of this essay is on a political party that was founded in Sweden in 1904. Today, we known it as Moderata Samlingspartiet. Historically, this party has transitioned through multiple phases which have included a change of name and also a change of substance in the area of trade policy. The party that was cheering globalisation at the 2006 congress had its roots in protectionism and had been founded as a strict protectionist organisation. The question raised here is what has caused this dramatic change in the trade politic?In addressing this important question, I have used both organization and party strategy theories to identify the main underlying reasons.

AimThe aim of this study was to find out how the research that has changed CPR training developed from a historical perspective. The question at issue was: When the recommendations for chest compressions/ventilation, defibrillator and education have been changed, what kind of research led to the development?MethodTo fulfill the aim of this study we chose a review process. First we read the international guidelines for cardiopulmonary resuscitation (CPR) published by the American Heart Association (AHA), from year 1980 until year 2010. Secondly we chose the most important changes that had been made within the issues we had selected, then we examined the research that had supported these issues.

This paper is finishing part of the two-year master programme in Industrial Engineering and Management.Initially there was an inquiry of studying the queue-times that Fläkt Woods uses when they break down internal working orders. These times were assumed to be too generalised and does not apply to the actual value of the queue-times which generates incorrect data and delivery delays. During the work of this paper it has been established that it is not the queue-times that is the biggest problem. The problem is the shop floor control and the lack of manufacturing the right products at the right time. Therefore an analysis of the production planning process was made to bring forward the real problems.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

Many professions, such as doctors and psychologists, have a long history of work practice which have resulted that these professions have created their own ethical guidelines. The IT profession, which can be viewed as a relative young and somewhat immature profession, have yet to accommodate any clear guidelines regarding ethics. It?s therefore imperative to create discussions regarding ethical actions to raise the ethical awareness and also create ethical guidelines. The development of the IT profession is moving forward at a quick pace and it?s important to understand that this rapid advancement is not only changing the profession but also changing the society and the environment.

The aim of this study is to bring forward four teachers of Arts-education, their statements and reasoning concerning the condition and meaning of the subject of Arts-education along with their statements in relation to theory and earlier research, give voice and insight in their intentions according to what teaching of Arts-education should contribute to.The basis for the study is brought out of the dilemma that there, in the subject of Artseducation is ?crowding of matter? in the nine-year compulsory school, difficulties in selecting the importance of various subjects and different opinions between teachers, due to curriculum being modified in accordance with the development in society. The earlier research that this study relates to shows how teacher?s opinion of different subjects varies. My questions concerning the subject are the following;How do four teachers of Arts-education reason concerning the condition and meaning of the subject of Arts-education?What are the teachers intentions according to what teaching of Arts-education should contribute to?What are the similarities and differences between the statements of the teachers in this study versus the teachers' statements according to previous research?To find answers on my issues and questions I have made interviews with four teachers of Arts-education and have then put their reasoning and statements against theories , which  all concerns the creative process.

In primary school reading-books in Swedish language is something that students come across early in school and have done ever since the 1800s. After World War II there have been major changes in society. 1962 there was a school reform where the school turned into a nine-year system of compulsory education. That is why it is interesting to see what reading books contain with regard to notions of children, family and class and how the developments have been from the 1950s until the present time. This study aims to analyze and compare the different aspects of how notions of children, family and class are produced in the reading books for primary school for pupils in third grade, between 1950 and 2009.The research questions were:What are the notions of children, family and class in the reading-books?What differences/similarities exist in the reading books from the 1950s to the  recent decades?What could be the reason?I have chosen to apply qualitative text analysis originating in idea analysis.

In this study, I intend to examine some aspects of the activities of cultural companies in the town of Arvika. The study is qualitative in nature and based on in-depth interviews with self-employed cultural workers, as well as representatives from Arvika municipality. Cultural policy documents have been studied to clarify the self-employed status in the cultural sector and thus their importance to the cultural life in Arvika overall.My hope is to get a glimpse of what it means to work as a self-employed within the cultural sector in Arvika and the conditions that exist, in order to successfully run and develop their businesses.There is a shift in cultural policy, which has led to permanent forms of employment becoming fewer and self-employment to grow ( Karlsson & Lekvall, 6 ). One can say that the cultural sector has moved in the direction from a public matter, to the more privatized ( Köping , Lantz & Stenström, 3 ). The problem with this is that the policy of self-employment has not progressed at the same rate as the amount of business.

Purpose: To find out in what ways signs of healthier varieties in store, affect and possible change, customer behaviour. Methodology: The study has a positivistic view on the world. The research is conducted by an abductive approach using theory and empirical data alternately. Both quantitative and qualitative methods have been adopted in order to see changes in customer behaviour as well as explain it. Theoretical perspective: The study is based upon theories in the areas of customer behaviour (buying behaviour and decision making) and the store environment that could affect that behaviour (total merchandise process and point of purchase communication).

Title: A Business Perspective on Reducing the Climate Impact from Tetra Paks Transportations of Goods. Authors: Pär BerglundSebastian Lyngström Supervisors: Lars J Nilsson, Environmental and Energy Systems, Lund UniversityNils Månsson, Department of Business Administration, Lund University Problem Analysis: Increased awareness concerning climate change will put pressure on companies to reduce their climate impact. Problems arise when trying to reduce the impact from transportations due to companies? limited control on forwarding agents and difficulties measuring the emissions. Purpose: From a business perspective, this report will enable a reduction of the climate impact that arises from Tetra Paks transportation of goods.