Fortum has in a pilot project installed metering equipment with wireless communication in secondary substations in Stockholm. So far, the collected data are used only in specific projects.This master thesis was carried out at Fortum Distribution AB in Stockholm during 2013. The purpose of this study is to simplify and enhance the use of data in for example network planning process, by giving suggestions on how data can be managed and giving examples of analyzes that collected data can be used for.The electricity meter which Fortum has installed is a EDMI-Mk10A which is set to measure max/average/min values with a one hour time resolution of the following parameters: voltage (per phase), current (per phase) andactive power and active and reactive energy.In order to analyze the collected data an analysis tool is required. During this thesis two customized tools in Microsoft Excel have been developed, one for sorting data and one for analyzing.One aim of the thesis is to show examples of what collected measurement data can be used for. This work shows an example of analysis of active power, power factor, voltage, occurrence of interrupts and the relationship between outdoor temperature and power.This master thesis has among others resulted in the following advice: Expand the number of secondary substations with measuring equipment.

The purpose of this master?s thesis is to contribute to the development of business relationships between a supplier and its customers. The research area and research problem was further developed into three research questions. The research questions concerns the following subjects: the substance of business relationships and dimensions within relationships management that can be used in order to contribute to the development of a company?s business relationships.

In this master thesis outage statistics covering tree years from two distribution grids are analyzed with the purpose to deduce which factors yield outages. The statistics are extensive therefore allowing in-depth analysis of both customer and system related factors. From this starting point and as a model of explanation energy not supplied is studied as the consequence and the measurement of the inconvenience caused by outages. Different methods for calculating energy not supplied are developed and studied and put in comparison to the method used in Network Performance Assessment Model, which is the Swedish frame work for regulating electricity distribution.Analysis of the outage statistics show a relation between the type category of customer and outages that can be deduced to the variance and the density associated with that customer category. Prioritization of different customer categories is elevated also in this aspect.

Requirements engineering is a widespread topic in the research field of informatics. However, there is little research regarding lack of requirements documentation and how it is perceived. The same applies for how requirements engineering in retrospect can be implemented. This is a debated issue on blogs and forums but it has not been reflected in the research area.Therefore, this study concerns research questions regarding how the developers, testers and requirements analyst experience the lack of requirements documentation and how requirements engineering in retrospect can be implemented.To answer these questions, data collection has been conducted through qualitative interviews with individuals affected by this problem in their everyday work.This study has provided an explanation of how the problem is perceived and what the consequences are, both direct and indirect. The impacts are divided into three categories and are presented as, emotional consequences, system implications and consequences regarding re source consumption.

New technology makes it possible to remotely measure all consumers in a power network onan hourly basis and store the values in a database.This thesis work describes the conversion process between automatic meter reading systemMActor and calculation software Xpower.Then the possible differences between calculations of power networks using load curves incombination with a yearly estimate of consumption and calculations using hourly measuredvalues is examined.The result of the comparison shows that, for the power network under inspection, nosignificant difference could be noticed. This does not mean that calculations using hourlymeasured values would be unnecessary. I believe that in a near future calculations using hourmeasurements will be the primary choice for many power companies to whom technology isavailable.Also some basic calculations of fundamental power network parameters, such as power factorand loses, are presented using hourly measured distribution transformers in combinations withits hourly measured loads.The report is written in Swedish.

Requirements engineering is a widespread topic in the research field of informatics. However, there is little research regarding lack of requirements documentation and how it is perceived. The same applies for how requirements engineering in retrospect can be implemented. This is a debated issue on blogs and forums but it has not been reflected in the research area.Therefore, this study concerns research questions regarding how the developers, testers and requirements analyst experience the lack of requirements documentation and how requirements engineering in retrospect can be implemented.To answer these questions, data collection has been conducted through qualitative interviews with individuals affected by this problem in their everyday work.This study has provided an explanation of how the problem is perceived and what the consequences are, both direct and indirect. The impacts are divided into three categories and are presented as, emotional consequences, system implications and consequences regarding re source consumption.

The purpose of this thesis is to examine how reading different media forms can lead to different experiences for the reader and how they choose which media form to read. Two questions are posed in the study. Question number one is: How does the media form influence the reading experience of the book and question number two is: What reasons can be seen behind the different choices of media forms?The study is based upon qualitative interviews with six readers using different media forms. Two different theories are used for analyzing the result.

This project aims to investigate whether algae can be used for biodiesel production in Italy. Algaes are a good option since they are fast growing and do not occupy arable land. The aspects that have been considered are growing, harvesting, which algae strain that is most suitable, extraction of oil, the production of biodiesel and where in Italy this could be possible due to climate. Cost? and energy calculations have been made to investigate if biodiesel produced from algae would be profitable. During the production of biodiesel there are several residues obtained. When the oil has been extracted from the algae, biogas is produced from the residual biomass by anaerobic digestion and then the electricity that can be produced is supplied to the production of biodiesel.

Solar energy is the one most talked about among energy sources due to its huge potential amongst renewable energy technologies. A greater use of the solar energy may be the solution to today's climate threats. Normally there are two different types of solar technologies, solar cells and solar thermal collectors. Solar cells convert solar energy in to electricity whilst solar thermal collectors convert solar energy into heat, which can be used to heat hot water for households. This goal of this study has been to investigate the possibility of implementing solar energy into the energy system of Kista Galleria, one of Sweden's foremost venues.

Textiles are made in an unsustainable way and there is a need to find alternative ways and material to reduce the negative impacts on the environment, humans and animals. Problems like pollution, excessive water consumption and loss of soil fertility is a result of this lack of diversity. It is a necessity to find innovative alternatives in other fabrics due to the unsustainable use of cotton and polyester fibers. As in many other countries in the Western part of the world, in Sweden there is a rapid turnover and increased selling of clothes that result in increased textile waste. About 15 kilogram of textiles (net inflow) is consumed per person each year.

This essay aims to broaden the understanding of intolerance towards people with religious and/or cultural Islamic association or background. This thesis has intolerance and Islamophobia as central components and starts with the question: In what manner do twelve pupils talk about Islam and Muslims in their third year of the vocational program, in small towns and in the countryside? The survey took place in the south of Sweden in a rural municipality where a total of twelve students from the industrial, electricity and vehicle program in the Swedish gymnasiums participated in two separate focus group interviews. The essay will use an intersectional analysis to see where the students position themselves and Muslims in relation to each other and to society. The essay also contains a comparison of Islamophobia in the country side and in the city environment.

Sparse matrices are often used in numerical algorithms that solve linear equation systems. Many methods for storing sparse matrices have been proposed and implemented during the years. These methods focus primarily on minimizing the total memory consumption and the time that it takes to store a sparse matrix. This report researches the available storage methods for sparse unstructured matrices. The formats that are researched and implemented are COO, CRS and ELL.

Embedded Systems Lab at Umeå University is currently part of a research project with the purpose to examine the behavior of dairy cows inside a barn. Each cow needs to be tracked with a precision of 50 cm, and since GPS-technique has poor functionality at indoor environments, an indoor positioning system needs to be developed.Embedded Systems Lab has already developed an indoor positioning system using IR-light and radio, but since this system demands extensive infrastructure and is rather expensive, an alternate positioning system using ultrasonic pulses and radio is being examined.In this report the range, beam angle and current consumption of ultrasonic transmitters- and receivers are investigated. Three different driver stages for the transmitter is tested, and two amplifier solutions for the receiver. The report also describes how the length of the transmitted ultrasonic pulse affects the received signal, accessibility of a ?shadowed? signal, and the effect of different sound frequency..

This study has been carried out in the spring of 2014 on behalf of PQR Consult AB in Stockholm. The aim of the study has been to analyse the energy usage of the building Skarpövägen 1 in order to explore the possibilites of saving energy by using appropriate equipment. These possible solutions have been simulated by using the programe IDA Indoor Climate and Energy, combined with a life cycle cost analysis. The laundry building, Skarövägen 23, has also been analysed due to its high amount of energy usage. The result of the energy analysis showed that the energy usage was much higher than the energy declaration.

The purpose of this essay is to analyze and understand how people in different ways can take on the role as carriers of brands and understand what part they play in today?s society. Brands are everywhere today and the competitions are becoming harder and harder for the customers? attention and consumption, which is why I am curious of how an individual in a company?s frontline or a celebrity can help the success of a brand. The essay is based on a qualitative method where six interviews have been performed.