Linux is a growing operating system in embedded systems. Today, Linux is not only in heavy servers but also in cell phones, PDAs, cameras and other devices running on battery power. While current technology is more energy efficient, more and more technologies are implemented into a single unit resulting in an overall increase of power consumption.Low power consumption is an increasingly important feature of a system today. Lower power consumption means lower costs, less environmental impact, and longer life for applications that runs on batteries.This work compiles methods to reduce power consumption of Linux systems. The work includes examining whether the available opportunities are platform-specific or of a more general nature.

The release of green house gases and the environmental impacts humans have on the environment are huge and might cause irreversible changes to our earth. Meat is considered to have large impacts on the environment, especially beef meat and therefore there have lately been considerable discussions on the sustainable level of meat consumption and production. The main goal with this thesis is to study sustainable meat production and meat consumption in the county of Dalarna in Sweden. Indicators for sustainable meat production and meat consumption were developed and applied on three cases. Interviews were carried out with a municipality in the region that represents the consumer and three beef farmers that represents the producers.

The aim of this study was to investigate the knowledge of dental erosion and the consumption habits of soft drinks among secondary school students. Differences between the sexes should also be investigated. The study consisted of 102 students, 60 women and 42 men, in the eleventh grade from a school in the south of Sweden. A questionnaire with 25 questions, divided in two parts with focus on knowledge respective consumption pattern and behaviour, was handed out and collected by the authors. The data showed that more than 50% of the participants had knowledge about dental erosion.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

This research study constitutes a critical stand, which departure from the increase in welfare, and decrease in quality of life, and is further directed to the sphere of consumption. Contemporary consumers appear to seek for components to construct their self with through consumption, consumerism has become a sphere of life, and has consequently also become a victimizing force steering the identity and self construction of consumers. The alarm bells however are echoing in Western society, and consumers are experiencing dilemmas such as fragmentation, powerlessness, uncertainty and meaninglessness.In this respect we have presented spiritualism as an applicable path of escape or alternative to the scheme of the material oriented consumption sphere. We intend to broaden the scope of the interplay between spiritualism and consumerism in the act of yoga, and we have therefore been researching: what yoga is doing to consumers, and what consumers are doing to yoga. The study is based on an existential epistemology paradigm, which emphasis on the meaning of the yoga experience attained from the subjects of research; the yoga practitioners, and therefore we have carried out three focus group discussions.

The hospital in Varberg has a somewhat outmoded solution regarding the state of preparedness in its water sustentation. Today?s solution is both cause to a number of mishaps and high energy consumption.The report is initiated by looking into the present situation to get an insight to the problem.Today?s media depletion is measured and analyzed.Furthermore, it also looks into some earlier performed studies. These studies are followed up in order to see if measures have been taken.The report presents a number of arrangements which should be taken, amongst those a minor re-build of the current solution and a number of arrangements which leads to decreased water consumption..

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

One of the main goals in this study is to investigate how young children's identity formation and social relationships are depicted by today's consumer society.  In order to reach the goals of the study I also concentrated myself on questions regarding the reflection of symbolic aspects consumption in younger children's interaction and preschool-teachers' ideas about how and in what ways children's consumption patterns are created and developed nowadays. In order to answer the presented research questions I used the theoretical arguments of researchers in the field of pedagogy Gert Biesta in connection with the ideas and concepts of the consumer society characteristics developed by the sociologist Zygmunt Bauman.The thesis' methodological approach consists of a combination of semi-structured interviews with teachers and observations of children's interaction, which contributed to a systematic investigation of the thesis' problem area and served as a tool for obtaining answers to the research questions.The results demonstrate that consumption occupies a lot of space in young children's lives, which means that it greatly affects their social relationships today. Both consumption and knowledge of the known brands prove to be the child's path to the desired community on the one hand, and the children's way to the consumer world on the other (hand), which in turn points to an obvious dependence between children's consumption and their social relationships.The results also show that there is a tension between the perception of identity formation as preschool-policy-document on the one hand and the attitude of the identity prescribed by consumer society norms and regulations on the other..

?CSR and political consumption ? a study of Nike?s and Puma?s CSR-reports?The purpose of this dissertation is to examine if political consumption has influenced multinational corporations to improve their Corporate Social Responsibility reports and policies more, than a company who has not been a target for political consumption.This dissertation is a content analysis of Nike?s and Puma?s first (Nike 2001, Puma 2001) and latest (Nike 2007/09, Puma 2007/08) CSR- reports. Archie Carroll?s model of Corporate Social Responsibility is used as theoretical framework in this study. The model is used to focus on four areas within CSR; economic, legal, ethical and philanthropic.

In today?s society climate change has grown to one of the largest global issues. To reduce emissions of greenhouse gases, large changes of the energy system are required. An increasingly popular solution is investments in local production of renewable energy resources like wind, solar or geothermal power. The following report examines the possibility for implementing a solar power plant on the new hospital Nya Karolinska Solna. Two different technologies for extraction of solar energy has been studied, solar thermal collectors  to meet the need of heating and solar cells to satisfy the need for electricity linked to operating the hospital building.

This thesis concerns an energy audit of a food industry. The company's business consists of boiling and peeling shrimps, and producing mayonnaise-based salads. This type of work involves energy-intensive processes, such as steam generation, compression of air and refrigeration of large spaces. These needs are supplied with electricity. Furthermore, the industry is a major consumer of district heating, particularly for heating the supply air in the ventilation system.

Simulation of different systems can be done using a graphical model description of the system based on block diagrams. The simulation software Matlab/Simulink offers a lot of possibilities to describe a huge number of systems, which can be linear as well as nonlinear. The simulation using Matlab/Simulink is done by integration based on different kinds of numerical methods.When nonlinear Simulink-models are simulated, it is often interesting to apply a Kalman filter to handle the noise that may occur within the process as well as corrupting the measurement. However, application of such a filter leads to an extensive time-consumption despite using fast computers. The reason is that the existing Matlab functions are not constructed for time optimal evaluation.

The building sector accounted for around a fourth of the total energy usage in Sweden in year 2010 (Energimyndigheten, 2012). Therefore it has become very interesting to achieve a lower energy usage in residential buildings. One way to achieve that is to build so called passive houses. By being very well insulated and have low leakage through the walls, they can reduce the energy usage for heating with a substantial amount. The first passive house was built during the 90?s in Germany; and in Sweden the first passive house was built in Gothenburg 2001.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..