Mapping a process enables a greater understanding of the work, and is standard to evaluate and improve a process. This thesis is conducted at Test Bed Mechanical Design at Scania in Södertälje. Test Bed Construction is a complex process, characterized by a large amount of creative work, technical challenges and coordination between different people and different organizational functions.The aim of the thesis was to identify the Test Bed Construction Process and to develop a visual model of the workflow that also served as support for the engineers in their daily work. During the mapping process, comparisons were made with previous research in lean product development to identify process improvement.A literature review on process mapping and process visualisation resulted in a method for process mapping. The study showed that research on process visualisation is neither structured nor well defined.

Volvo Penta has been producing boat engines since 1907 and are world leading in this seg­ment. They have today an extended range and also sell industrial power stations. Quality, safe­ty and environmental care are three core values for Volvo and together they strive to give their customers the right product with the right quality.Volvo has developed a production system named Volvo Production System, VPS, and one of the pillars is continuous improvements. Within this pillar you can find value stream map­ping, which is used to analyze the value stream through the process. This tool gives a wide perspective and helps to keep focus on the entire process instead of just parts of it.Volvo Penta in Vara has earlier done value stream mapping but without good results since they didn?t take set-up times and imbalances in account.

Ericsson AB in Katrineholm is a part of the Section Business Unit Network in the Ericsson Group. The plant's main task is to produce printed circuit boards in small volumes with a high product mix and focus on delivery and cost effectiveness. At the factory they produce printed circuit boards in the Module department.The Module department has for a long time had a high output of non-approved circuit boards in their production. This has led to a growing stock of non-approved circuit boards on the company?s repair department.The purpose of this thesis is to investigate how Ericsson in Katrineholm can increase the outflow of approved articles in their test process in the Module department.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

A future expansion of wind power in the Nordic power system makes the balancing for the transmission system operator Svenska Kraftnät (SvK) more complicated. Up to the hour of delivery the balance responsible parties? (BRP) makes prognoses and plans, for consumption and production, to help maintain the balance in the electrical grid. How well this is accomplished is affected by the setup of the market design. Therefore SvK has proposed the following possible changes in market design: Increase the imbalance costsIntensify the regulation of imbalancesIncrease the temporal resolution on the different marketsPresent the prices for balancing power in real-timeModify the balancing market to simplify auction of consumption bidsA mapping over the BRPs? processes within planning and trading on the day-ahead, intra-day, and the balancing market has been performed in this thesis.

AbstractThe intension with this paper was to describe the understanding students in third grade had about mathematics and how these students, based on their previous mathematics experiences, apprehend the coming national tests in mathematics. After the test period the student was interviewed on how they experienced their participation in the test. The choice of method was the qualitative case study where the data was collected from interviews and observations. In the result that was found, the interviewed students described mathematics as counting. Students preferred easy math work and to solve routine tasks in math books instead of more demanding work.

Generally prosody is described as the rhythmic, dynamic and melodic features of language. Prosody is further often described as suprasegmental, since its properties go beyond vowels and consonants, which are segmental characteristics of language. A relationship between prosody and music has been noticed and described for several decades. At present, there are several studies proving relationship between prosodic and musical abilities. The aim of the present study was to construct a test for prosodic non-linguistic perception and production regarding intonation and rhythm. The test was tried out on 16 children with typical language development aged 4;6-7;6 years. Before testing of ITAP each participant were asked about musical experience.

Bakgrund: Det är viktigt att kliniskt kunna avgöra om idrottaren är tillräckligt rehabiliterad för att återgå till full träning och matchspel eftersom otillräcklig rehabilitering är den största riskfaktorn för återskada i hamstrings. Därför skulle ett test med enkel utrustning behöva komplettera den kliniska undersökningen.Syfte: Studiens syfte är att undersöka vilket samband som finns mellan genomförandet av Nordic hamstring strength test och Asklings hamstring test utifrån skattning av smärta och obehag i samband med testen. Huruvida deltagarnas tilltro till att prestera sitt yttersta i en 90 min fotbollsmatch påverkas efter testerna samt att beskriva obehag och smärta efter testerna för spelare som varit skadad eller inte under senaste sex månaderna.Metod: 22 fotbollsspelare fick skatta sin tilltro till sin egen förmåga att prestera sitt yttersta i en 90 min fotbollsmatch samt skatta obehag och smärta med VAS i samband med testerna. Hamstring Outcome Score användes för att få en helhetssyn av deltagarnas funktion och skadehistoria kring hamstring. Spearman?s rho och Wilcoxon?s teckenrang test användes för att analysera resultatet.Resultat: Korrelationen mellan Asklings hamstring test och Nordic hamstring strength test var moderat (0,4-0,6) dock signifikant på <0,05.

Bakgrund: Det är viktigt att kliniskt kunna avgöra om idrottaren är tillräckligt rehabiliterad för att återgå till full träning och matchspel eftersom otillräcklig rehabilitering är den största riskfaktorn för återskada i hamstrings. Därför skulle ett test med enkel utrustning behöva komplettera den kliniska undersökningen.Syfte: Studiens syfte är att undersöka vilket samband som finns mellan genomförandet av Nordic hamstring strength test och Asklings hamstring test utifrån skattning av smärta och obehag i samband med testen. Huruvida deltagarnas tilltro till att prestera sitt yttersta i en 90 min fotbollsmatch påverkas efter testerna samt att beskriva obehag och smärta efter testerna för spelare som varit skadad eller inte under senaste sex månaderna.Metod: 22 fotbollsspelare fick skatta sin tilltro till sin egen förmåga att prestera sitt yttersta i en 90 min fotbollsmatch samt skatta obehag och smärta med VAS i samband med testerna. Hamstring Outcome Score användes för att få en helhetssyn av deltagarnas funktion och skadehistoria kring hamstring. Spearman?s rho och Wilcoxon?s teckenrang test användes för att analysera resultatet.Resultat: Korrelationen mellan Asklings hamstring test och Nordic hamstring strength test var moderat (0,4-0,6) dock signifikant på <0,05.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.

The aims of the following project has beento make a proposition how to create aspecific kind of transformer. Thefollowing report evaluates the differentimportant variables and contains asuggestion for a possible design. Intheory it's an ordinary transformer that'ssuppose to transform electrical effect toa high voltage line. The design of thetransformer is using an already existingcurrent transformer design and is adjustedto work for it's specific purpose. Theproject also contains the developing of atransformer simulation model that will beused to evaluate and optimize thedimensions of the resulting transformer..

Inom disciplinen kognitiv ho?rselvetenskap tilla?mpas en integrerad ansats da?r taluppfattning beskrivs ur ba?de ett auditivt bottom-up-perspektiv och ett kognitivt top-down-perspektiv. Studien underso?kte hur taluppfattning varierar med, respektive utan top-down-sto?d och vad de kognitiva fo?rma?gorna uppma?rksamhet, minne och inhiberingsfo?rma?ga hade fo?r inverkan. Taluppfattningsfo?rma?ga utva?rderades med hja?lp av ett Speech-In-Noise-test (SIN-test) som bestod av tre deltest da?r enstaviga ord presenterades i en ofo?rdelaktig miljo? besta?ende av ro?ster som talande i mun pa? varandra.

Syftet med detta examensarbete var att utveckla en utrustning för test av larmsystem uppbyggda med CareTech?s Smart Call-produkter. Testutrustningen ska kunna upptäcka problem i kommunikationen mellan dessa enheter. Den ska också kunna mäta matningsspänningen till enheterna under en viss tid och visa om spänningen har varit lägre eller högre än tillåtna värden..

Inom disciplinen kognitiv ho?rselvetenskap tilla?mpas en integrerad ansats da?r taluppfattning beskrivs ur ba?de ett auditivt bottom-up-perspektiv och ett kognitivt top-down-perspektiv. Studien underso?kte hur taluppfattning varierar med, respektive utan top-down-sto?d och vad de kognitiva fo?rma?gorna uppma?rksamhet, minne och inhiberingsfo?rma?ga hade fo?r inverkan. Taluppfattningsfo?rma?ga utva?rderades med hja?lp av ett Speech-In-Noise-test (SIN-test) som bestod av tre deltest da?r enstaviga ord presenterades i en ofo?rdelaktig miljo? besta?ende av ro?ster som talande i mun pa? varandra.