This bachelor thesis is about an ultrasonic sensor, implemented in a bubble chamber in Artis. The sensor consists of the piezoelectric sensor and an electronic control circuit. The control circuit consists of a programmable microprocessor, PIC18F2420 and a circuit, which sends the excitation signal to the piezoelectric sensor, and later receives the echo. This bachelor thesis consists also of a theoretical study, which examines different techniques of liquid level sensing in a chamber. The study discusses which factors are important in liquid level sensing and examine accepted methods.

System Andersson AB is a company located in Jönköping that works with developing computer systems for the mechanical engineering industry. As of today, when this report is written, the company is working on the development of a new Manufacturing Planning and Control (MPC) system. This new system aims to create not only a user friendly interface but also a modern, stylish interface. To achieve this, the company has decided to work with a, for them, new application framework; Windows Presentation Foundation (WPF).System Andersson is well known for developing systems for different kinds of touch screens, this project is no exception. For this new user interface the company wishes to implement different types of Drag&Drop functionality.

This thesis work contains a litterature study about electrical motors in general and how PWM-patterns for brushless DC-motors can be made. A suitable method has been implemented as a simulation model in VHDL. A simulation model of a brushless DC-motor which describes the phasecurrents, torque and angular velocity has also been made. The motor model made simulations easier for the complete PWM-system. The design was synthesised and tested with a prototypeboard including a SPARTAN II FPGA.

This master thesis was carried out at Scania in Södertälje, Sweden. It investigates the possibility of changing a connector interface that is used when there is a need for splicing the wheel speed sensor and thereby determine the consequences.The problems that exist with the current connector interface occur during assembly, as more time is required to complete a connection in a reliable manner. A complete connection requires joining the male and female connector, insert the connection into a protective retainer and then strap a cable tie on each end of the retainer. This process makes it more time consuming and it requires 20-30 seconds to complete the connection. Solving this problem would save time and enable easier assembly, therefore resulting in economical benefits.This thesis was accomplished through discussions with different sections at Scania, studying available documentations, observations during assembly, writing a requirement specification and contacting suppliers.The aforementioned methods resulted in four connector suggestions, the DT and DTMH connector from Deutsch, MCON connector from TE connectivity and MLK connector from Kostal, each of them compliant with the set demands of the surrounding environment.

The eld of Brain-computer interfaces (BCI) concerns linking together an external device with the brain of a human or an animal. By doing this the conventional use of a mouse or keyboard can be circumvented, which can greatly benefit people with different types of diseases that cause paralysis or other loss of motor control, such as Amyotrophic lateral sclerosis (ALS). A BCI can also be used for cognitive training of either healthy or mentally impaired subjects to increase cognitive capabilities.In this thesis an implementation of an interface is made against such a device, the Emotiv EPOC Headset. The result is meant to be a stable basis for further study using the device. An in-depth study of the history of EEG and its current use in clinical work and research in the topics of BCI as well as Human-computer interaction (HCI) is presented.

When searching for better and more practical interfaces between users and their computers, additional or alternative modes of communication between the two parties would be of great use. This thesis handles the possibilities of using eye and head movements as well as voice input as these alternative modes of communication. One part of this project is devoted to find possible interaction techniques when navigating in a computer interface with movements of the eye or the head. The result of this part is four different controls of an interface, adapted to suit this kind of navigation, combined together in a demo application. Another part of the project is devoted to the development of an application, with voice control as primary input method.

This is a heuristic evaluation of Umeå university library?s Online Public Access Catalog (OPAC). It makes use of four of Nielsen?s ten heuristics, flexibility and efficiency to use, match between the system and real world, visibility of system status, and aesthetic and minimalist design. The evaluation was done by having 3 evaluators inspect the interface individually, as per Nielsen?s (1990) recommendation of 3-5 evaluators.

HMS Networks AB develops, produces and sells communication technology for industrial automation. The product handles communication between a variety of protocols. The product treated in this project is an Anybus X-gateway Modbus-TCP Master/Client and this module is currently configured from a web-based interface. In doing so, the flexibility for handling protocols is limited to what the company chooses to add to the interface. Therefore the company had a request that the flexibility should be extended using a script language.

The purpose of this development project is to create a model for working with a high school project in Electrical and Energy Program. It should be conducted in a form like companies do according to the goals from The Swedish National Agency for Education. In order to fully perform this we use the concept of Young Entrepreneurship. The model is created according to the new conditions from The National Electrical Safety Board. There is now an exception saying that a student during education is released from the demand of employment that is the normal procedure where you are under supervision from a certified electrician. During the project there has been theoretical and practical examinations in order to clear out the advantages and disadvantages using this model, but also to examine whether it is useful in the future and to what extent it can be used. The result indicates that the model is useful and fulfills the goals from The Swedish National Agency for Education but that the model has its limitations and difficulties.

The final thesis named Tracking in Sensor Networks was created by the company Instrument control Sweden. The thesis work is to create a plug-in to an already developed software pro- gram, SkyView. Via the software program one should be able to control an IP-camera from AXIS, model 215 PTZ, with the appropriate protocol over a network.  An Application Programming Interface, API, was used to easily control the camera through SkyView. The interface is called VAPIX and is used to all cameras from AXIS.

The purpose of this bachelor?s thesis is to examine how students at Högskolan i Borås experience the web-scale discovery service Summon, based on the theoretical model of ?The Five Dimensions of Usability?, defined by Whitney Quesenbery. The study aims to answer the following research questions: How do the students execute search assignments in the Summon interface? How intuitive and easy to navigate is the system from a user perspective? What are the students? opinions about Summon, regarding usability?Five students with varying information seeking skills are asked to perform search assignments during controlled observation, followed by semi-structured interviews. Our findings are presented in the context of previous research and show correspondence with the results of related studies.

Ticks and the diseases they transmit are of major importance throughout the world. In Uganda, cattle are the most important livestock from an economic point of view. Livestock keepers fear bi-directional transmission of tick-borne pathogens between their livestock and wild animals. This cross-sectional study was conducted to establish and compare the sero-prevalence of the tick-borne pathogen Babesia bigemina among randomly selected Ankole Long-horned cattle and European crossbred cattle on 30 farms in Kiruhura district, in two sub-counties near Lake Mburo National Park in South-western Uganda. Half of the farms were situated in close proximity to the park and thereby housed cattle with more frequent wildlife-livestock interface (Sanga), whereas the other half had less frequent contact (Kikatsi).

This master thesis is an attempt to study the interface in itself, where the human meets the machine and the problems that can arise. I study a particular interface, namely the OPAC of Libra III. In 1999 IFLA presented recommendations for what an OPAC shall contain, and in one part of my master thesis I compare Libra III with these recommendations from my opinion. In another part of my master thesis I make an investigation where I let five by me chosen persons answer some questions from me, both by doing and verbally. I draw the conclusion that Libra III follows most of the recommendations of IFLA in a sufficient way.

`When one does not have what one wants, one must want what one has´: `I have had, you see, to resort more and more to very small, almost invisible pleasures, little extras....You´ve no idea how great one becomes with these little details, it´s incredible how one grows. ´ The aim of this master thesis is to find words and expressions that can accompany city phenomenas as well as the people wandering through the space which is defiened as city. Through this tentative search a new term was found namely Urban Settler Marks. This term started a journey and an attempt to theoretisize why people have a need for various spaces to put their Urban Settlers Marks onto. My focus was drawn to electrical boxes in the urban environment because of their ambigious nature.

Compressed air is a low efficiency media, and is thus very expensive to produce. This thesis work began by mind mapping how to create savings on the compressed air system at Billerud Skärblacka AB. Certain issues have been chosen for further studies.In order to identify the consumption of compressed air at PM 8 and 9, several measurements were made. At PM 8 there were not found any pressure drop, only large pressure variations for short periods of time. The causes of these pressure variations were not established.