The purpose of the project is to determine the impact of solar cells and electrical vehicles on the future electricity grid and distribution network. Future electricity grids will be affected differently than it does today. Therefore, it is important to determine the impacts so that the current electricity distribution system can be developed and redesign to achieve the future demand. In Sweden, government has changed rules and laws in order to make it easier for private sector to invest in renewable energy sources. Our project focused on the impact of the solar cells and electric vehicles on the low voltage electricity distribution.

The purpose of this thesis is to investigate how Digital Signage systems such as public info kiosks can be designed to better fulfill its main use; to enlighten, encourage and influence the public with information. The challenges presented from earlier studies shows that the public interests and goals, together with proper and relevant content displayed in info kiosks have impact on the attention the public have towards public displays. Qualitative methods such as interviews, usability testing and observations were conducted to further examine how a public info kiosk can be designed to draw attention and grow interest amongst students at K3, Malmo University. Usability testing were used on the digital prototypes that were developed to ensure that the gestural user interface meet the requirements of a proper interaction from the users. Important insights were made concerning; the attention and interest to relevant content, the aspects of the gestural user interface along with the placement of the info kiosk in terms of context.

The aim of this thesis is to examine user experience and engagements in interactive cinema.A great deal of the research that is conducted today involves creating interactive films, toexplore and examine film structures. In this study, we build on this research by comparingthree different interactive film structures. To carry out our study, we have categorized threedifferent interactive films after three different models to define their narrative structureand interface. To examine the experiences of those structures we have performed anexperiment where we have collected data from the three different sources; interviews,observations and surveys.It is difficult to draw conclusions about how an interactive film should be constructed asdifferent structures apply to different narratives. Based on our research the conclusion canbe made that the combination between the narrative structure, the narrative content, theaesthetics, the implementation of interactivity and how the film?s interface is constructed ismore important than building a specific structure for an interactive film.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

Scania provides a fleet management system for hauliers who want to control their fleets in anefficient way. The system includes an onboard computer with touch screen called ScaniaInteractor where the driver can access GPS navigation, order support, message service and otherfunctionalities. The purpose of this thesis is to develop a concept for logging the user interactionon the Interactor and analyze the result which enables further development and optimization ofthe interface.A demonstration application is designed, implemented and tested for the purpose of showing thepossibilities and difficulties with logging of interaction. The result shows that logging is quiteeasy to implement and that the amount of produced data is small and therefore not expensive totransfer via GPRS to a central server where searching and analysis can be done. On the otherhand, the biggest challenge lies in the analysis and interpretation of the logged data and to applyit to the development of the interface.

Children?s use of mobile devices is constantly increasing and has become very popular withchildren as young as toddlers. Schools in Sweden have made large investments to expand theuse of information technology (IT), and the use of mobile devices in preschools is already acommon support tool for learning. Children?s use of IT is a relatively new phenomenon,which means that is it also a relatively new area of research.

Today?s electrical grid companies understand that better knowledge of and information about their grid can help realize a smart grid network. One way to gain better knowledge and information about the low voltage network is to install measuring equipment on the substation transformer´s secondary low voltage side that measures the low voltage network losses for that specific substation. By doing so, grid companies can, due to the calculation of the low voltage network losses, identify and address issues such as illegal power dissipation, unmeasured power outtakes, and unsatisfied technical documentation for the substations low voltage network.During 2012, Mälarenergi Elnät AB had a total electrical network loss (both medium and low voltage network losses included) of three to four percent of their total distributed electrical volume. Converting this energy volume into a monetary figure this accounts for a loss of around 30 million Swedish crowns.

The most common types of smartphones in Sweden are iPhone and Android. Development in the IT feld is constantly changing and Windows Phone is a new operating system that has been introduced on the Swedish market in 2010. However, Windows Phone user interface is quite different from iPhone and Android.The numbers of applications for smartphones are increasing, and users are making greater demands on better  usability. Users want the application to be easy to understand and fast to bring into play.  If the application contains a bug or has other user problems, it can ruin the entire experience. If the user does not have a good experience of the application, the user will quickly stop using the application.Companies that do not have any mobile applications would probably begin with an iPhone application.

Vertical hydropower units has a rotating mass of up to 1000 tons. For the generator and turbine to work well the rotating system is required to be centered in relation to the surrounding structure. This is achieved by means of radial bearings. The dynamic characteristics of these bearings have a strong impact on the overall rotational dynamics of the total system and thus influence the vibrations in the unit. At Vattenfall Research & Development in Älvkarleby ongoing research is taking place on how the bearing parameters should be represented in the rotor dynamic calculations.

IKEA HaparandaTornio employ some two-hundred people in its furniture retail store.Keeping track of staff statistics and employee information has previously been achievedthrough the use of a basic Microsoft Office Excel spreadsheet. The store?s human resourcesdepartment requested an upgrade to this system with the hope of speeding up andsimplifying the administrative process, as well as to make it easier to monitor HR-relatedtarget statistics. The following report documents the development process of that upgrade ascarried out by the author. The project draws on research in usability design and cognitivepsychology to develop a user-friendly interface.

This master thesis is made of two parts. The first part concerns the method and results ofdesigning a motion control system for a piece of research-equipment called BIRGIT. Theequipment is made to be used for research on eyemovements. In the second part, a computermodel of a part of the balance organ in the inner-ear is developed. The work has been done atthe Bernadotte laboratory at S:t Erik Eye Hospital.The equipment the control system is made for is a so-called rotationchair.

This report contains a programming improvement work in a LabVIEW? fire testing furnace control system for SP Fire Technology in Borås. Here materials and products behaviour are tested and evaluated, being exposed to fire. For this task, UGNET is being used for control and surveillance of the testing furnace system. System hardware has been updated gradually through the years, while the software has been neglected.

The objective of this work was to evaluate and implement a number of energy saving functions for a specific embedded system. The functions were then grouped into a number of energy levels with known properties in terms of functionality, energy consumption, and transition time between the levels.The embedded system consisted of an AT91 ARM9 processor, GSM/GPRS modem, display, Ethernet and other peripheral units. Some energy saving methods that were considered were suspend to RAM, suspend to disk, frequency scaling, and methods for saving energy in the modem, Ethernet, USB and display backlight. The functions were grouped into levels and an interface was specified for controlling the energy level.It proved possible to get known properties within the defined energy levels, even though the paritioning of functions into these levels proved to be sub-optimal in a typical application usage scenario because it was designed for mainly energy consumption, not usage.The final result is a number of energy saving functions grouped into levels, which are controllable via an application interface. Each of the levels have a known energy consumption in both loaded and un-loaded mode..

The aim of this thesis is to accomplish a user study on how e-book users experience the electronic book, the e-book, as an instrument for reading fiction. The study is based upon qualitative interviews with twelve e-book users and a small survey carried out at the Stockholm City Library. The purpose is to identify the users' incentive for choosing the e-book as a medium for reading fiction, elucidate if and how the interface of the e-book affects the reading experience, and distinguish if there are any factors common to the users in their choice of reading e-books. How the users look upon the future of the e-book is also discussed. Among the people asked in the survey we note little if any demand for the e-book as an instrument for reading fiction.