Radio frequency identification (RFID) is a versatile wireless technology usedworldwide. The fields of applications are many and its popularity constantlygrows due to smaller in size, better and less expensive components. RFID isused to identify, track or share information about an object using radio waves.This master thesis describes the process of designing and implementing ahandheld UHF RFID reader. The goal was to, based on a UHF RFID-chipdesign a fully functional, small in size and power efficient device. Amicrocontroller provides the user interface and is also used to control theRFID-chip and a Bluetooth device.

The fishing port of Bläsinge is located on the east coast of Öland, Sweden?s second largest island. Today the port has a limited supply of freshwater. The economic association of the fishing port wants to expand their business, so that they will also include tourist services. To do this the harbor will need a more independant source of freshwater, with a higher quality than the present well.

The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.

Denna rapport i form av examensarbete för utbildningsprogrammet Managing Technology and Business Projects, är en del i Volvos framtida produktions-/ produktstrategier.Uppsatsens syfte är att ur ett produktionsperspektiv understödja Volvo Construction Equipment i Braås i strävan mot en ökad modulindelning av ramstyrda dumprar, som en del i utvecklingsarbetet för en effektivare produktion. Resultat har uppnåtts genom analys av intern och extern benchmarking jämfört med den teori som finns inom ämnesområdet modulindelning. Huvudresultatet visar att teorin och verkligheten skiljer sig genom att modulindelning ska anpassas individuellt utifrån varje företag och inte fungerar som en generellt applicerbar process. Slutsatsen visar att Volvo CE i Braås måste utveckla en egen handlingsplan och kravspecifikation utifrån egna definitioner som är skräddarsydda specifikt för företaget.I rapporten presenteras förslag till ovanstående handlingsplan för modulindelning på Volvo CE i Braås..

At Saab Aerospace in Linköping, components for measurement systems to the fighter aircraft JAS 39 Gripen are developed. In this activity you sometimes want to record the traffic transmitted on the data busses that connects different sys-tems. This traffic on the data busses is using the military standard MIL-STD-1553. This project has aimed to create a system for recording and sending 1553-data. The system is used on an ordinary personal computer, equipped with a recon- figurable I/O card that among others has a programmable logic circuit (FPGA).

The aim of this thesis is to establish a ?förvaltningsplans? template to Fastighetskontoret in Vasteras city. Further general information about the mission was given at our first meeting with Rolf Haraldsson, who happened to be our mentor and works at Fastighetskontoret in Vasteras city.We agreed that using the software Excel was the most appropriate way to establish the template, because Fastighetskontoret also make use of Excel in their internal system, and also because Excel has a more friendly user interface and it is more easier to use compared to other software that have complex templates.One of the first things we did was to get in contact with different fastighetskontors around Sweden so that we could either take part of their ?förvaltningsplaner? or get referred to other material that could have been used. But this turned out to be an unsuccessful strategy.

This bachelor degree project was carried out at Saab AB Service and Repair, Arboga, Sweden. The objective was to design, construct and implement a new stable and reliable method of measuring the continuous vertical displacement (height) of the military search radar PS861 mounted on a hydraulic powered elevator. The end product needs to be durable enough to be fully operational in the harsh environment of an outdoor elevator shaft and yet as accurate and precise as possible since one of its purposes is to calibrate control equipment. Previously used technique has proven not to meet any of the above mentioned properties.A prototype using a high resolution quadrature output rotary encoder has been developed, allowing a completely digital interface. This new method has been evaluated in laboratory environment where tests have been conducted regarding both reliability and validity.

Cache simulator is a tool to increase the understanding of a cache memory. Therefore cache memory simulation is included in the course Computer Engineering IS1200 at the Royal Institution of Technology. The purpose of this project is to develop a cache memory simulator for education. The existing MipsIt and Mips Simulator which is currently used in IS1200 has been the main source of inspiration. This resulted in the development of the cache memory simulator LMSim.

In Sweden, there are limits to how much leachable substances waste must contain in order to be deposited as hazardous waste. Fly ash from waste incineration often end up over the limit, mainly due to the chloride content. Fly ash is therefore often deposited abroad. The purpose of this study was to investigate the possibility to handle fly ash locally. To clarify how the law is applied, environmental reports and permit documents from ten waste sites with permission to deposit fly ash were studied.

Den här rapporten behandlar frågeställningen om hur man kan anpassa systemutvecklingav ett informationssystem enligt livscykelmodellen till att inkludera användbarhetstester. Frågeställningen grundar sig i att god användbarhet inte är ett explicit uttryckt mål i Andersens beskrivning av livscykelmodellen. För att besvara frågeställningen har vi utvecklat och testat ett bokningssystem åt en mindre verksamhet. Utvecklingsarbetet har bedrivits enligt en egen anpassning av livscykelmodellen. Testerna har utförts enligt metoden cooperativ evaluation.

The interest in tiny wireless applications raises the demand for an integrated reference oscillator with the same performance as the macroscopic quartz crystal reference oscillators. The main challenge of the thesis is to prove that it is possible to build a MEMS based oscillator that approaches the accuracy level of existing quartz crystal oscillators. The MEMS resonator samples which Philips provides are measured and an equivalent electrical model is designed for them. This model is used in the simulations of the Pierce oscillator and the transresistance amplifier oscillator that are evaluated in this thesis. Finally the Pierce oscillator is implemented in the A BCD2 process and manufactured at Philips Semiconductors in Nijmegen, The Netherlands.

Denna rapport syftar till att beskriva arbetet med att utveckla en prototyp till den nya versionen av Hmi Designer utvecklat av Bombardier Transportation. Detta designerverktyg används för att skapa det grafiska användargränssnittet på ett tågs kontrolldator. En ny version av designverktyget är nödvändig eftersom resterande delar av Bombardiers programpaket för utveckling av applikationer har bytt både programmeringsmiljö och programmeringsspråk. Den prototyp som utvecklades ska visa på möjligheterna att i ett senare skede utföra ett fullskaligt projekt. Prototypen implementeras som en insticksmodul till Qt Creator, därav beskrivs tillvägagångssättet för att utveckla insticksmoduler i den programmeringsmiljön samt de fördelar och nackdelar som identifierats i och med ett byte till Qt Creator.

The use of Power Line Communication, PLC, as a communication solution for Automated Meter Reading, AMR, is popular by utilities in Sweden and other parts of the world due to demands of accurate and fast meter reading. However the use of the electrical grid as a communication medium is complex and sometimes problematic. This report handles some of the issues and problems that are important to understand when using the grid as a communications medium. Focus is mainly on investigating high frequency distortion in the Kristianstad power grid own by C4energi caused by a frequency converter. Measurements on site are done to investigate signal damping in the grid, different configurations for the frequency converter and signal strength of the PLC-system.

Under de senaste åren har användningen av interna sociala nätverk (ISN) markant ökat. En orsak till detta kan vara den ökade användningen av publika sociala nätverk (så som Facebook eller Twitter) på arbetstid, då detta tenderar att sänka arbetsmoralen och effektiviteten hos de anställda. Ett ISN fungerar i princip som ett socialt medium, men dock innanför ett företags eller organisations interna väggar och fokuserar mer på att främja samarbete, kommunikation och kunskapsutbyte. Detta examensarbete utreder hur man kan implementera ett ISN i en mindre organisation och få det att leva i ett företags vardag. Vanligtvis används ISN inom större företag för att främst hitta och dela kunskap inom organisationen.I denna avhandling kommer jag (baserat på genomförda metoder) skräddarsy ett gränssnitt för Xtractor Interactive AB i ett ISN som heter Totara Social.

AbstractThe future of ethanol is depending on good solutions for the production. ENA energy power plant produces electrical power and district heating by heating biofuel. By building an integrated bioenergy plant surplus steam could be used to produce ethanol as fuel to vehicle.This would mean that ethanol is produced renewable energy and the energy for the process derives from the surplus of power.  ENA energy, MDH (the University of Mälardalen) and the energy authority has initiated a research project were different bioenergy combinations integrate with existing power plant.  As a part of the project which size an integrated factory should be to gain the best efficiency for the plant was investigated. Consideration will be taken to the cost of the production in order to be competitive to the price of imported ethanol.  Etanolens framtid vilar på bra lösningar för framställning.  I ENA energi kraftverk i Enköping produceras el och fjärrvärme genom eldning av biobränsle.  Genom att bygga ett integrerat bioenergikraftverk där skulle man kunna använda överskottsånga till att framställa etanol som fordonsbränsle.