I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.

The purpose of this thesis was to design an electrical system for use in a ballistic test at the Swedish National laboratory of forensic science (SKL). The detector unit would use four main parts: coilsystem, transmitter, reciever and indicator. The coilsystem would be based on a balanced system using three coils. One that creates a magneticfield and the other two will sense the differences when a metallobject is in the coilsystem. This report starts out by investigating possible solutions for this specific task followed by a description of the physics that the metaldetector use.

Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.

An increasing number of heat pump producers have developed heat pumps that can be connected to solar panels. In this thesis we have examined the possibilities of connecting solar panels to existing ground source- and geothermal heat pumps that has not been adapted to solar panels. During the work process, a prototype plant has been built to compare our theory with the practical results and with our designed sizing tool. The work has rendered in knowledge that will be used to build a sun module that can be easily connect to the existing heat pump system. The existing heat pump, our test plant, has been supplemented by an advanced storage tank used to allow different operating modes.

The automotive market is currently undergoing a historical change where stricter emission legislations and ever increasing fuel costs have intensified the search for effective alternatives to the conventional internal combustion engine, which has resulted in a substantial trend towards electrification of powertrains. Storage of electrical energy is the fundamental component in this technology where the lithium-ion batteries are currently considered as the most appropriate solution. Lithium-ion batteries, however, as other types of batteries, can only be used efficiently and durably within a specific temperature range.This Master thesis has been carried out in collaboration with Electroengine in Sweden AB, situated in Uppsala, which has an ongoing project regarding development of a modular battery system for electric powertrains. The project is at a stage where an initial prototype has been developed which provides the foundation for this thesis. The study has addressed the battery system performance from a thermal perspective, in order to validate the ability of the system to create a thermally serviceable environment for the lithium-ion battery cells.

The concentration and storage of organic chlorine and chloride were determined in soil, to a depth of 40 cm, in a coniferous forest in the Stubbetorp catchment area in south-east Sweden. Also, the spatial distribution of the two forms of chlorine was determined. Soil samples were collected at 49 of the nodes in a grid with approximately 105 m between the nodes. The analysis of spatial variability suggested that no spatial autocorrelation was present either within the variable organic chlorine or chloride. This means that no sample was more influenced by another nearby sample, as compared to other samples further away.

I was assigned to the thesis as part of a project GMA AB (Ground Machinery Applications AB) is running. The project aims to develop a new method for injection of drilled holes in rock walls. Currently, the injections usually involve cement but the basic idea of the project is to replace cement with a supplement called Silica sol.Silica sol is known as a gelling liquid. The gel time is controlled by a mixing of saline. Depending on the amount saline that gets mixed in, the gel time varies.

A home for elderly is planed to be built at Zakrisdal, Karlstad, Sweden. The heat source for the building was at the time not determined. In order by the local government of Karlstad this report is meant to examine if the need of heat could be provided only by solar heat combined with a seasonal heat storage. The problem to solve is, if the need of heat from the home for elderly is provided from only solar heat, whitch dimensions of the solar collectors and the storage is needed?.

Dagens moderna organisationer driver vanligtvis en kostsam IT-baserad infrastruktur. De besitter högpresterande funktionalitet och säkerhet för att garantera att de dagliga operationerna fortskrider. Mjukvarubaserade lagringsplattformar är ett alternativ som kan användas för att reducera dessa kostnader. Genom att efterlikna avancerad teknik som redan existerar i traditionella lagringsplattformar kan detta implementeras som mjukvara på commodity hardware i syfte att uppnå samma funktionalitet. Ceph är ett alternativ som numera implementeras och ämnar erbjuda detta val.

Purpose: This study deals with warehouse management with an emphasis on vertical lift modules (VLM). The aim is to examine the effect of the implementation of VLM on a business's warehouse management. In order to obtain a result, the study has been based on the following questions:? How was the warehouse management designed before the implementation of VLM?? How is warehouse management designed after the implementation of VLM?Method: To be able to answer these questions, interviews with ten users of VLM performed. All users usually lift systems from the same manufacturer.

This assignment has been performed at location and commissioned by AttenditAB in Jönköping. The task has been to develop a client/server system to accessdata stored in SQL databases where the client application is developed to run onregular cellular telephones. The importance has been to develop as reliable mobilecommunication as possible. The functionality that is demanded upon the mobilecommunication is:? Secured for future versions? Interoperability? Data should not be bugged, modified or disappearunnoticed? Resource efficientWe have achieved these demands by developing our own protocol that is on top ofthe TCP protocol.

The sun is a huge energy source with great potential of providing energy to the heating of homes and other buildings in an environmentally sustainable manner. In order to provide buildings with energy from the sun it is necessary to transfer the energy supply over time to when the demand arises. By storing the heat in a seasonal storage, solar energy from the summer can be used in the winter when the demand for heating is greatest.Today's existing plants are mainly in Europe and particularly in Germany. These facilities are designed to supply heat demands greater than 400 MWh and covers about 40-50 % of this need which consists of energy for space heating and domestic hot water. How much of the heat demand that is covered, the solar fraction, is partly due to losses from the storage which in turn is connected to the surface area of the storage.

Demographic Surveillance System Implementation- Low-level structures of the PDA- PC/PDA communicationThis thesis report describes the continuing work to develop a tool for demographic research at CIDS (Centro de Investigación en Demografía y Salud Universidad Nacional Autónoma de Nicaragua), UNAN, Leon/Nicaragua.The report is divided into four parts:? Revision of the existing database as a result of newly found requierments? Implementation of the low-level design on the PDA? Communication between the PC and the PDA? A mid-storage database on the client-PC.

In today's society there is a significant focus on energy efficiency. Despite this, people leave lamps, televisions and computer screens etc. powered on unnecessarily. The goal of this project is to build a simple prototype for home automation where a user, via an application on a mobile phone, can switch on and off the power of an electrical products in the home and as well as being able to check whether such products are switched on or off. The prototype will also collect data on power consumption for these electrical products.

Companies worldwide strive to reduce costs and capital tied up in stock. At the same time, the need for short delivery times requires efficient logistic flows. In order to meet customer demands an efficient warehouse activity is required.The purpose of this study is to develop a model for designing a warehouse system regarding to working environment and safety. The model is primarily designed and based on literature reviews of scientific articles and books, own knowledge and the authors previous work experience in the industry.The thesis has been done at Sandvik AB, the department Precision strip in Sandviken. Sandvik is a high-technology engineering group with advanced products and a world-leading positions within selected areas.