This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

The fork lifter chipper truck is a concept which has been developed for harvest and transport of bio fuel. The system consists of one fork lifter chipper truck and 1, 2 or 3 transport lorries, usually two, which serves the fork lifter chipper truck. The system is driven by the fork lifter chipper truck that produces chipped material into a container on the truck. When the container has been filled the truck drives to the landing site where it?s offloaded.

Many research reports mention the fact that a huge number of all system development projects never reach a successful ending; with other words never fulfil formulated goals. By identifying and forming success factors (and in some aspect risk factors) that the project manager in practice can use, this study may be seen as a step in the direction towards minimising the high number of failed system development projects. The purpose of this research report is to investigate how a system development project, where the development process is based on a specific development or process model (in this case the Waterfall model), can and should be driven. I aim to clarify what is demanded of a project leader for the specific development process and give an account for which eventual leadership qualities that can be well suited for given situation in relation to the need for technical competence. Among other things the project manager should inspire confidence, drive, be a decision maker, engage and own some form of basic knowledge in the field of system development.

ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process controller and four power meters.

The subject of this bachelors degree project is an interior layout for road ambulances.Landstinget Västernorrland (LVN) wanted a layout concept that would be used to com- municate their design intentions to the ambulance producers during their purchase process.Designing ambulance interiors is an extremely complex process since there so many fac- tors to take into consideration. It ?s not just about taking the equipment and place it where there is space left in the cabin. You have to start with the user in focus and the tasks that are to be performed in the ambulance environment.It ishard to find design solutions that will fit 100% of the ambulance personnel?s working routines for 100% of the tasks.

This report treats whether it is viable to invest in solar heating to heat the therapy pool at Östersunds Rehabcentrum. The rehab center is owned by the county council of Jämtland and is located on Solliden in Östersund city. The solar heating where supposed to be a complement to the district heating that was heating the pool in the current situation. Later, it however showed that this was not the case. The pool is currently being heated by a radiator circuit that is being heated by the district heating.

Examensarbetet behandlar nödrutschsystemet som Alimak AB utrustar sina hissar med. Detta system har till uppgift att vid strömbortfall säkerställa att individer i hisskorgen kan rutscha till närmsta stannplan eller nödutgång. Målet med examensarbetet är att Ex-säkra detta system. Ex-säkring innebär att bromsen får arbeta i en explosionsbenägen miljö..

The use of silicon carbide (SiC) as a base material in power electronics has manyadvantages, including high breakdown voltage and excellent temperature endurance.However, the packaging of such electronics presents major challenges and there is aneed for packaging that can operate in higher temperature. The purpose of this thesishas been to develop a test method and verify the functionality of SiC powertransistors prototypes with a new packaging technique developed by Swerea IVF AB.It includes setting up an electrical test-bed for power and high temperature cyclingand analysis of the results. Even though test confirmed functionality after thepackaging process, (at room temperature) the performance seemed to have been reduced. This could be a result of the measurement setup and the packaging process.In higher temperature the transistors failed to operate longer than a couple ofminutes which showed the weaknesses in the design and the challenges with this typeof packaging..

Marknaden för mobila system har utvecklats enormt snabbt de senaste åren. Idag är det ett område med en allt större omsättning och det har vuxit fram som en helt ny gren inom Software Engineering. Utvecklare av mobila applikationer står ständigt inför en utmaning när det gäller att välja vilket mobilt system man ska satsa på när man utvecklar applikationer. Valet av system kan vara helt avgörande för om man hittar rätt målgrupp av konsumenter och därmed kan generera tillräckligt med omsättning för att driva lönsam utveckling av applikationer. Det räcker inte att enbart kolla på vilket system som har mest användare eller vilket system som genererar mest omsättning, utan man bör noggrant överväga de förhållande som gäller för just den applikation som ska utvecklas.

To reconstruct a building is a long-term investment for farmers and it is important that people with different qualifications are involved at an early stage for making the system adapted to the animals as well the animal keeper. Therefore, ethologists who can contribute with their expertise are needed to design the system and get it to function well for the animals.A Swedish farmer who planned to rebuild her stall for tied dairy cattle to a loose-housing system for recruitment heifers for milk production asked me as an ethologist to find a system which can be fit to her existing tie-stall barn for 30 dairy cows, considering the animal needs in terms of movement, social interactions and play behaviors, and to theoretically compare the system with other systems with respect to the behaviors mentioned.The theoretical comparison between different systems was made through a scientific literature review.In agreement with the animal keeper I set out to fit a system with feeding cubicles, a system with cubicles and a system with deep straw bedding to the barn. After measurements were taken and preliminary drawings were outlined it was found that only the feeding cubicle system was possible to fit to the barn.The space provided will limit the animals to perform some playing behaviors. To decrease aggressive interactions between animals even thought a limiting area it is possible to provide partitions between resources animals compete around to prevent that more than one animal can get success to the resource at a particular place at one time. To increase the animal movement in the system the water trays were moved to the outer wall instead of kept in contact with the stalls.Although this report provides guidelines for rebuilding, other competences regarding building construction and a pre-test of the suggested building solution according to Swedish legislation are needed before the rebuilding can start.The results are directed mainly to the owner of the barn, but the literature review can be used by other cattle farmers and might bring increased understanding of the possible effects of different building solution on the animals..

Projektet omfattade en jämförelsestudie avseende stomsystem. Studien undersökte ramverk och fackverk/balk/pelar-system och genomfördes självständigt med stöttning av Ramböll AB´s kontor i Falun. Syftet var främst att undersöka vilka skillnader det finns mellan tvåledsramar och fackverk/balk/pelar-system för lätta hallbyggnader och försöka få klarhet i varför fackverk/balk/pelar-system är det dominerande systemet i Sverige eftersom övriga Europa har tagit en annan utveckling och domineras av tvåledsramar. Studien undersöker skillnaderna mellan systemen i en hallbyggnad med förutbestämda mått i stål.Inledningsvis gjordes en litteraturstudie för att få en bredare bakgrund av systemen och en bättre förståelse om förutsättningarna för varje system. Efter litteraturstudien kunde sedan ett typhus och beräkningsunderlag för jämförelsestudien tas fram.

The borehole heat exchangers of today suffer from poor thermal and hydrodynamic performance. The purpose of this thesis is to improve the performance of ground source heat pump systems and thermal energy storages by increasing the energy efficiency of the borehole heat exchangers. For this reason, the annular coaxial borehole heat exchanger (CBHE) has been analyzed. This type of heat exchanger is interesting in terms of both thermal and hydrodynamic performance. A model has been set up in the program Comsol Multiphysics in order to investigate the heat transfer characteristics along the borehole.

Most of the goats in the world exist in the developing countries where they are important in the meat industry. In Europe, goats are mostly kept for milk production although the interest for meat is growing. Goats have a thin carcass with only small amounts of intramuscular fat, which gives a lean meat. This thin subcutaneous fat cover can cause cold shortening when chilling the carcass. By using electrical stimulation cold shortening can be prevented.