This paper investigates the internal product costing system in one of the Swedish banks with the purpose to evaluate the quality of its product costs and possible implications on decision making. The study shows that the current system distorts product costs by, among other things, using relative allocation of costs and time and by allocating all costs to individual units of products. We therefore propose an alternative product costing system, which mainly draws on ABC theory but is also adapted to the specific needs of service companies and of the Bank. This proposal is intended as a solution in this particular case and not to be generalized in other contexts. We hope however to add to the understanding of why more complex costing systems, such as the ones based on ABC theory are, according to previous studies, not widely used in practice.

The purpose of this thesis was to create a strategic/tactical road access plan. This was done by designing an analytical method which gives the road manager a template to create long-term road access plans. The analytical method will help to identify and appraise roads to be upgraded and give information when it is time for building new roads. The study method involved developing an analytical method. The method was comprised of five main parts: the harvest plan, analysis of the road network, transport costs, quality and storage costs and finally, identification of investment alternatives.

Thesis completed by Johan Arvidsson, Alex Rasooli and Pontus Winroth, students at master program Product development and Design at the School of Engineering in Jönköping Sweden. The project comprises 30 ECTS credits and was carried out during the semester in the autumn of 2007.It was carried out in cooperation with Eksjöverken AB, subcontractor within the truck industry with special knowledge within the area of complicated machinery construction work. Job initiators at Eksjöverken were Mats Svanberg and Kjell Nygard. Dag Holmgren was acting as a tutor from the university. The task was to develop tools for trucks, primary toolboxes but in case of time also under run protection.

The intention has been to look at the school system in South Africa and specifically at arts and culture in grade 10 to 12. I have visited a number of classes and interviewed the teachers working at the art centre PJ Olivier in Stellenbosch. By doing this I wanted to get to know the system and to understand the intentions that the curriculum describes.I have all through the study related the areas I?ve looked at to the curriculum to see how well the intentions are implemented. I have also compared everything with the Swedish school system.The curriculum has good intentions but the country has a lot to do before they reach the goals with a school system where everybody is included and where there is ?ubuntu? (Zulu word for humanity or I am what I am because of what we all are).

This thesis aims to develop a control system for measuring electromagnetic compability (EMC). This has meant that a controller designed around an ATmega8 microcontroller has been manufactured and programmed. It has also meant the development of a comprehensive control software in the program MATLAB. The control system has been tested with satisfactory results and can now, monitor and control measurements of the EMC-type..

Problem: Our opinion is that it is important to consider about usability in system development. In this thesis we will focus on usability in point-of-sale systems. The point-of-sale system we base this thesis on is Extenda Retail. Our case study is performed on Ica Kvantum in Bromölla, which implemented Extenda Retail about two years ago. Purpose: The purpose of this thesis is to figure out what important factors there are to consider, in usability aspects, when developing point-of-sale systems, with focus on the cashier. We also wish to find out the cashiers opinions about the Extenda Retail system. Method: The information gathered for this thesis consists of literature and interviews.

Today an increasing number of schools and organizations are investing in so called Learning Management Systems. Researchers disagree on the pedagogical value of these tools. Some mean that Learning Management Systems cement old-fashioned behaviouristic teaching practices; others mean that the systems provide good opportunities in supporting learning in a socio cultural perspective. The aim of this study is to reach better understanding and increased knowledge of how the introduction of a Learning Management System influences the role of the teacher and how the learning is organized. We have conducted two case studies.

 With the increases in fuel costs due to the depletion of the world oil reserves and the increase of greenhouse gasses as a consequence to using oil as a fuel many companies are looking to new and innovative ways to power their aircraft. One of these new ways to power an aircraft is using fuel cells powered using hydrogen and oxygen, thus producing nothing but water vapour and small amounts of nitrogen dioxide as well as trace amounts of other emissions. Both Boeing (1) and Politecnico di Torino (2) have shown that it is possible to build an all-electric aircraft powered by fuel cells. Both flights used small, two-seater aircraft and a constant between them was the loss of the co-pilot seat due to weight and lack of space. As this paper will deal with a commercial aircraft a primary concern is the cargo and passenger capacity and whatever impact switching propulsion system has on these.

This project investigated the current market regarding wireless net and the communication between the tools used for diagnostics/maintenance and an embedded system. Based on documentation obtained through interviews a demo system was created based on Bluetooth Low Energy (BLE) communication between an embedded system and an Android device.This report intends to describe the tools and methods used in the design of the demo system and the result of an analysis of the BLE communication.Bluetooth Low Energy is an exciting protocol with wide applicability within the industrial field. This project investigated the communicational possibilities between a Smartphone and a Raspberry Pi and based on the results that emerged the conclusion can be drawn that BLE is a protocol with many beneficial applications within industrial IT..

To be able to measure high-surge voltages and transients with short rise times youneed measuring instruments with a high sampling frequency and large Bandwidth.These surges and transients occur primarily at lightning but can also occur at forexample at connecting errors at an electrical switch-gear. This report describes thework with finding two solutions for measuring and log data from these surges andtransients. One temporary solution where a measurement program has beendeveloped. A second solution where different company solutions have been analyzedto decide which fits best. For these measurement solutions two solutions for bringingdown the voltage has been used.

Denna uppsats handlar om en kurs, vid namn Elkompetens A, en grundläggande, men också behörighetsgivande kurs som ingår i Elprogrammets obligatoriska kurser. Den genomförs vid Carlsunds Utbildningscentrum i Motala på elprogrammets första årskurs.I detta arbete har jag försökt få svar på, vilken av två olika arbetsupplägg, som gav eleverna mest utbyte i form av kunskaper att bygga vidare på i nästkommande årskurser. Den stora skillnaden i uppläggen, är utgångspunkten för kursen. Efterforskningen är i första hand byggd på intervjuer med elever ur två olika årskullar..

Ett konsultföretag får in anbudsförfrågningar och måste därmed göra kalkyler för dessa förfrågningar. Med hjälp av ett webbaserat system där en anställd kan göra kalkyleringar kan företaget få ett gemensamt sätt att arbeta och uppföljningen underlättas. Systemet som har skapats ger användare möjlighet att göra anbudskalkyler genom en överskådlig och lättarbetad webbsida, där man kan se förhållandet mellan företagets kostnad gentemot kundpriset. All information lagras persistent i en databas för att möjliggöra uppföljning och synkronisering med andra system som används på företaget..

The purpose of this project was to further develop and complete a quadcopter that had been built in an earlier course at KTH, so that it could be used for demonstration and education at the school. The quadcopter was at the beginning of the project completed when it came to hardware, and there was some software functionality implemented but no system for automatic stabilization. The main goal of the project was to implement such a system, and to combine it with the previous functionality to make the quadcopter operable and able to fly. To create a functioning and stable ground multiple basic software features has been implemented, and on top of that additional software to improve the safety, stability and functionality. The most important part is the control system that is responsible for converting sensor and control signals to suitable motor values.

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.