Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

As the ability to computerize processes and tasks increase, the proliferation of complex systems in our society continues. How these systems are deployed in the organizations where they are meant to be utilized has been shown to have a large impact on how well they function.In January of 2011 the Enköping hospital initiated the deployment of an IT-support for drug management, a module in the general health care system Cambio COSMIC. Other health care providers in the county, and in the rest of Sweden, have had mixed feelings toward the module. Some have outright refused the module, claiming that it is detrimental to patient safety. One of the arguments for deploying the module in Enköping, however, was that it was needed to improve patient safety.The Enköping hospital is considered to be a well organized institution with good leadership and earlier good experiences regarding IT-systems.

Wind power is an energy source that is becoming increasingly popular in Sweden and around the world. The establishment of large wind farms supply and contributes to energy production within grid in search of a more sustainable energy production. Wind power is becoming more popular and opens up new areas of implementation. More cities are starting to use small-scale urban wind power, everything from full-scale work for a little less work adapted to the villas. Sweden has high goals regarding the production of green electricity and the work which deals with the conditions Sweden plays in achieving those goals.

This report describes a master thesis performed at Saab in Arboga. The main purpose was to build a controller for a system containing a turn table and an antenna beam. The idea is to use this system on a boat where it will be exposed to position disturbances due to waves. The desired behaviour is that antennas placed on the antenna beam should point towards the same target all the time. To solve this problem the system has been modeled and simulated in Matlab and Simulink.

IT is often seen as a solution to many problems concerning effectiveness in organizations. Information systems within the healthcare sector is often viewed as medical devices rather than just systems or services. These medical devices are thoroughly regulated by laws, standards and certifications. In this study I participated in an innovative project that aimed to bring new life and use to the old fashioned patient journal by giving it a visual representation through the use of an avatar. I aimed to study the effects of regulators connected with the patient journal as a source of information for the innovative project.

Abstract In high voltage substations there is an increasing demand for computerized equipment, and automation of operation and supervision. The future primary equipment will provide the possibility to collect more information and to provide better control for improved effectiveness. Since ABB has got a large customer target, each product must be custom made to fulfil the customers (often from different countries) demands. Later these products will be configured by engineers who may not be familiar with the tools used at ABB. This is a very expensive and time consuming.

In today's producing companies, there is a high demand on early integrated productdevelopment. One way to facilitate communication between departments and collaborationbetween people and thereby enable early sharing of product information within the companyis to use PLM, Product Lifecycle Management.The CAD environment at Scania is at the moment being upgraded from Catia v4 to Catiav5. In this stage it is important that also the interacting computer systems in Scania?s PLMenvironment are adjusted and in the future join the development. Scania has an idea of howthese systems will be developed as the transition from Catia v4 to Catia v5 is being carriedout.

The purpose of this thesis is to investigate the possibilities for shore side electricity in the ports of Västerås and Köping. A technical solution to connect the vessels to the local grid is suggested and the investigation is also aiming at an understanding of how the environment is affected by the use of shore side electricity. Furthermore, the costs of shore side electricity are considered.The maximum power demand of a vessel visiting the ports today is relatively small, but the ships visiting the ports in the future might have a larger power demand. The suggested dimension for the system is 5 MW and the result shows that the shore side electricity requires the power distribution to the ports to be expanded. The most useful solution in the ports is to connect the ships with 12 kV from a connection box in a pit at the quay.The investigation of the costs shows that it is cheaper for the ships to use electricity compared to the marine fuel.

ABSTRACT: Commercial swab transport systems are used for collection and transporting of fecal and other microbiological samples. This system must maintain viability and contribute to survival of microorganisms during transport to the laboratory. Four swab transport systems have been compared, eSwab, ?- Transwab and fecalSwab, all three with flocked swabs, and Copan Venturi Transystem with rayon swabs. The study followed the recommendations from the Clinical Laboratory Standard Institute; document M40-A for recovery of Samonella, Shigella, Yersinia and Neisseria gonorrhoeae after storage for 0, 6, 24, 48 and 72 h at room- (22-25°C) and refrigerated (2-8ºC) temperature.

Many traffic incidents are due to the driver?s lack of attention, resulting in dangerous lane departures, either sliding off theroad or into the oppose lane. These kinds of incidents often have serious outcomes, which has led to much effort being concentrated on preventing or lessening the damages when the incident is already a fact, for example by installing safety belts and air bags. These measures may be considered to be acts of so-called passive safety. Active safety on the other hand, means that the safety systems intervene before the incidents have occurred.

This is a Master´s Thesis based on my own idea instead of that of a company. It is a survey that focuses on finding out more about which part of the development process that is blocking the establishment of electronic scorecards on the golf market. Why has it not been introduced on the market in a larger scale yet, considering the technology we possess today? This question is investigated through interviews with the Swedish Golf association, and three companies that have chosen different paths to implement an electronic scorecard. The interviews focuses on finding out what developers and the association believe to be the main problem, before taking the next step in releasing electronic scorecards on a larger scale.

The purpose of this thesis has been to determine experimentally how good a peltierelement is to convert waste heat from wood burning. Three different peltier elementswere used in a comparison study. The comparison was mainly done to know howmuch power could be obtained from each element. Even, a circuit with a step-upfunction has been created to give a higher output voltage than the peltier elementitself. The result of the experiments was a low output power, the highest valuereached 2.18W.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The existence for companies today consists of constant challenges with customers that want more individual products with high quality as quickly as possible. For a company to be able to have a short delivery time, it must also have a short production time. This makes streamlining and improvement of processes a big part of a company?s workThis thesis has been carried out together with the company Lasermax Roll Systems AB, a world-leading manufacturer of feeding, finishing and monitoring systems for high-speed digital printers. They manufacture their products according to the assembling for costumer order principle.The purpose with this thesis is to map and analyze, the assembling process and the test process at Lasermax Roll Systems AB.