This is a project about how you grow timothy seed and red clover seed successfully. The main part is about economic analyse to see if it is any economy by growing leyseed. There are lots of things to be aware of to get all the costs in your economic analyze. Timothy Timothy seed is planted on 4400 hectares in Sweden. It is possible to grow timothy seed in the south part of Sweden. Timothy is very sensitive for dry weather in spring and in the beginning to summer. Timothy gives acceptable harvest of seed for about three years. Red clover Red clover is also sensitive for dry weather and is suitable to grow in the south part of Sweden.

A B S T R A C TTitle: Democracy- Choice of the people or the voice of media? (Demokrati- Folkets styre eller Mediernas Makt?)Number of pages: 36Author: Carolina VallinTutor: Else NygrenCourse: Media and Communication Studies CPeriod: Autumn term 2006University: Division of Media and Communication, Department of Information Science, Uppsala UniversityPurpose/Aim: The purpose with this essay is to discuss which influence media has on the democracy.Material/Method: Qualitative explorative research method is used to see how much space the newspaper Dagens Nyheter gave to the parties represented in the parliament, and compare the results with the numbers the parties received in the general election 2006.Main results: This research showed similar results in the survey made of DN and the numbers the parties received in the general election 2006. Media can?t decide how people should vote in a election, but they can influence what citizens think and talk about by having the power to choose which information that shows on the agenda.Key Words: Dagens Nyheter, Agenda setting, Media, Power and Democracy..

This thesis is   focused on identifying and documenting all   electrical equipment, such as devices, power lines / cables, and connectors in the facility and also on presenting a brief   technical description and information of the systems around the reactors.   Furthermore there will be a brief description of LabVIEW - which is a   graphical programming language- and which devices / elements   are programmed. For further notification, I am not   responsible for the programming of the devices in LabVIEW   which I have only used as a tool in my work. The plant   for production of biogas consists of four reactors   of which the third reactor (Lakbädden)   is connected to another reactor (UASB)   where they cooperate with each other.   The reactors are used for producing   biogas in the form of methane gas.The reactors I and II are   connected to, various electrical devices as, flow meters, temperature   sensors, frequency converter and   more.

Different Perspectives is a study of detainees' and guards' experiences of the remand prison. The result of the study shows that the remand prison brings forth the individuals anxiety, stress and fear. The individual detained in remand prison have a great need for contact with their families, but also with the guards. In the remand prison there is always a great level of control and always some kind of power practised. It is the guards who have the power and the competences to make the individuals detained in remand prison follow the rules and do what they have been told.

Domestication has resulted in the ability for animals to adapt to environments created by the human over time. The behavior differs very little between wild and domesticated animals, but the difference seen is how often and to what degree a behavior is performed. The need for efficiency in modern animal production has led to welfare problems in the productionsystems where the animals have difficulties coping with their environment. Attempts to environmentally adapt individuals by selection for reduced frequency of natural behaviours have been made. These have shown that natural behaviours are complex and are controlled by several different mechanisms, making selection for reduced natural behavior difficult, and it may also lead to unwanted and abnormal behaviours.

The purpose with this thesis is to analyse different factors that can explain district heating prices for energy companies in Sweden. We are further interested in examining if the prices is affected by the use of industrial waste heat in their production and the company?s ownership structure. The method applied is a multiple regression analysis using a panel data set of 50 companies over 5 years (2008-2012). The data used is yearly data obtained from the Swedish district heating association.

As a part of Göteborg Energi?s work towards a smarter electric grid, the company has chosen to investigate the possibilities of automation in their middle voltage grid. In Europe, there are example cases where these technologies already are installed which many articles on the CIRED conference 2011 proved. Netcontrol Oy in Finland has, together with Tekla, created an automated SCADA system that Vattenfall in Finland today uses. The grid mainly consists of 10 kV open loop fed city grid and this automation is mainly designed for this type of grid.

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

Platelets are important for the healing of damaged blood vessels since they have an importantpart to play in the coagulation process. At the same time, the blood must be kept fluid and notcoagulate at the wrong time. Therefore there are factors that effect the aggregation of plateletsin a positive or a negative way.Previous investigations have shown that platelets during stirring conditions produce reactiveoxygen species (ROS) that weaken the inhibiting effect of nitric oxides (NO) on platelets andthat the drug Dexamethasone (Dex) can reduce the ROS-production.The aim of this project was to investigate if glucocorticoids, in this case Dexamethasone,could restore the inhibiting effect of NO on platelets and if there was any decrease in ROS-production.The result of the ROS-measurements showed a great variance and it was difficult to draw anyconclusions from them, but a clear decrease in ROS, as previous reported, was not shown. In the aggregation experiments the inhibiting effect of NO was observed through the drug S-nitroso-N-acetylpenicillamine (SNAP), a NO-donator.From the aggregation experiments, the result seemed to be that SNAP during longerincubation time lost its inhibiting effect, probably because the cells become desensitized.With superoxid dismutase (SOD), the effect of SNAP increased, both in the experiment withlonger and shorter incubation times. Dex seemed to reinforce the aggregation in relation toboth SOD and SNAP.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

AbstractTitle: The first thing I do when I wake up is to log on to Facebook. A study regarding how users of Social Networks experiences the User Generated production. (Det första jag gör när jag vaknar är att logga in på Facebook. En studie om hur användare av de sociala nätverken upplever den användargenererande produktionen.)Number of pages: 37 (39 including enclosures) Author: Per MagnussonTutor: Christian ChristensenCourse: Media and Communication Studies CPeriod: Fall semester 2010University: Division of Media and Communication, Department of Information Science, Uppsala UniversityAim: The ambition with this essay is to examine how the online users of social networks experience the development of the Internet towards Web 2.0, and the enormous User Generated Content emerging from it. How do we receive User Generated Content from other people, and particularly what do we think about our own production.Material/Method: In order to obtain a deeper understanding of the attitudes and perceptions amongst people regarding this subject I used qualitative interviews with 9 people.

The Swedish consumption of lamb a increasing, and today we yearly eat a kilo of lamb per person each year. As a consequence the Swedish degree of self production according to lamb is steadily decreasing, and is today about 39 %.Today Swedish Meats is now cooperating with the Swedish lamb breeders organisation to raise that percentage. At the same time the European Union presents a new agricultural reform, the MTR (Mid Term Review). The shape of this new reform is not yet fully known, but the general policy has been more or less outlined. The new reform is split into three propositions: the farm model, the regional model and the mixed model.

Traditionally, mining has been performed mechanically with implementation ofyesterdays (and older) data. Several mining companies have started to useautonomous technology and robotics in the production areas although the harshmining environments make it unsuitable for today's electronic equipment. Despite allthe obstacles along the way of digitization, there seems to be no end in sight as thisdevelopment continues. This thesis focuses on what the mining industry is aiming forand why the mining companies are interested in these technologies. The actors of themining industry can be found to have a vision for the future mine, a production with ahigher degree of digitization and resemblances to a factory.

Fossil fuels are affecting our climate negatively and there is a limited amount of them in the world, which leads to the importance of finding alternative fuels. One alternative is biogas, which is produced though a digestion process of different organic materials in a biogasreactor. Organic substrate that comes from farms has the biggest potential to increase the production of biogas in Sweden. Primarily crops from farms, but also waste products like manure are of great importance.Today there is a calculated theoretical potential for biogasproduction of 14TWh per year, which is around ten times larger than Sweden?s production today.

The society of today is largely dependent on electricity and the dependence does not show any signs of declining. Reliability of supply will become increasingly important in the future and it is therefore important to investigate factors affecting the failure rates in electrical components.Sweden was hit by several severe storms during the 00?s. As a result of this many overhead lines in forests were cablified. In urban areas underground cable systems have been the norm for many years.