This thesis has identified and studied measures to allow for reduced use of electricity in a waste incineration plant in western Sweden. The energy extracted from the waste at the powerplant is utilized and sold in form of electricity and heat. Technical and environmentally the combined heat and power plant is by today's standards among the leading waste incineration plants in the world. The owners are constantly striving to improve the efficiency of the waste incineration plant. They have seen the opportunities for savings in reducing internal usage of electricity.

The division of Electricity at Uppsala University runs a project called Lysekil project, they have designed a buoy that uses the waves to create electric power from a generator attached to the bottom of the sea.Uppsala University is closely connected with the company Seabased and the university makes use of their facilities in Lysekil. When they designed the buoy issues occurred, the geometric design was flawed, brackets with a short shelf life and it is generally uneconomic.A study visit was done in Lysekil on Seabased facility. With this visit the project started, which is to improve the design of the buoy and the attachment of wires leading to the generator. In this project we have chosen to use a beam system with three beams that are attached to the buoy. Then a wire attached to a plate that sits between the beams will be leading to the generator. Two proposals for construction are created, what distinguishes them are the brackets between the beams and the buoy.From these constructions, the design that is considered most optimal for our project is chosen.All parts of the buoy have been modeled and the drawings are designed in ProEngineer software.The two constructions are compared with each other, but the whole focus is on the second and final structure. The report begins with an introduction describing Lysekil project, and a task description of our project.The project aims to produce an optimal buoy that will be easy to design, materials restrictive with good durability and an economical solution.Wave power true function has been studied, mechanical and finite element analysis of beams, buoy and plate design.This has been presented in this report, where in the various chapters can read more about the processes. Although the relevant facts and information on this project and buoy development is included.

This bachelor thesis describes the process of developing a two wheeled robot with activebalancing. The robot is designed to go straight ahead until it reaches a finish line. Then it shallstop to stand still balancing. The workload in the group has been divided according to theprevious individual projects, which are attached. The design of the robot is inspired by theconcept of the Segway.

Typically, when Faurecia in Torsås are planning a new assembly line, one of the steps is to build a full-scale model of the line in card board, a form of mock-up planning. Faurecia has shown interest in finding an alternative methodology. The purpose was to explore the possibility of replacing today's cardboard based mock-up planning with models in a digital simulation environment.The purpose of the thesis has been to answer some of these complex questions; What are the benefits of using a simulation tool? In what way can we use it? If we choose to use a simulation tool, in what way does it affect our way of planning an assembly line? What are the advantages and disadvantages? Are there any economical and social aspects?Our results made us realize that a digital simulation tool does not replace the card board. On the other hand simulation could be used as a complement.

Thesis purpose The study aims to examine the effects vertical and horizontal line extensions might have on the total parent brand equity in terms of strength and its baseline product regarding of market share, loyalty and penetration under an elapsed period of time. The study aims to investigate a number of actual conducted line extensions effect on the above mentioned aspects of Kellers (1993) definition of brand strength as a part of the total brand equity. Methodology The effect of a number of line extensions of the parent brands and the baseline products is being examined in terms of market share, loyalty rate, cannibalization and market penetration. The thesis is focused on the correlations between these different parameters during a certain elapsed time ratio in order to test our theoretically routed hypothesizes in a deductive manner. Occasional correlations are derived from an indexation of data collected from the Gfk database. Theoretical perspective The study is derived from Kapferers (2004) definition of brand equity, where he is dividing the concept into three parts. This study is focused on Brand strength in particular, which is one of the parameters in the above-mentioned theory.

This bachelor thesis describes the process of developing a two wheeled robot with activebalancing. The robot is designed to go straight ahead until it reaches a finish line. Then it shallstop to stand still balancing. The workload in the group has been divided according to theprevious individual projects, which are attached. The design of the robot is inspired by theconcept of the Segway.

This master thesis describes the development of an UPS module. UPS is an acronym for Uninterruptable Power Supply. The UPS module has been developed at the company AerotechTelub AB. The UPS module delivers the necessary voltage and current in case of a power interrupt. If a power interrupt occur, the computer system has one to three minutes available to store data and shut down correctly.

The Catalan movement of Independence is a well debated subject in Spanish news for the last decade. This thesis aims to examine what kind of identityarguments that spanish versus catalan newspapers make about the independence movement, in relation to nationalism and national identity. This is to deeper the understanding about the current complex situation in the Iberian Peninsula. The research shows that identityarguments about the independence movement presented by catalonian newspapers clearly put focus on identifying the ethnic and cultural reasons for the growing nationalism in the region, as well as discussing the political possibilities and obstacles of a sovereign Catalonia. In comparison, the identityarguments presented by spanish newspapers has another view of the situation, where the political aspect of the nationalistic catalan movement, identify the process as defying the Spanish Constitution and challenging the traditional historic unity of Spain.

The purpose of this paper is to examine the correlation between hotels, their brands and the frontline staff within the industry. A competitive, international environment characterizes today´s hotel industry where brands are one of the strongest sources for a successful position amongst competitors. In the brand delivery, the front line staff is of utmost importance since they in many ways incorporate the brand values and the projected identity of the hotel. Hotels can use a variety of ways to communicate the brands identity to the front line staff in order to create the desired brand behavior, some more effective than others. At the same time the Swedish hotel industry, as many other, is characterized by a high percentage of staff turnovers.

The scope of this project is to make a comparison of costs associated with wind and nuclear power in order to decide which one of these is the most suitable in the case of an increased demand for electricity. It is also investigated if there are other factors that can influence the choice of energy source.An average cost is calculated in terms of kronor per kilowatt-hour (SEK/kWh) using cost of investment, operation & maintenance and taxes & subsidies. Total investment cost is recalculated to production cost using the annuity method at three different interest rates (6%, 9% and 12%).The comparison is made between three cases of wind power and two cases of nuclear power. For wind power there are two ocean-based (300MW and 100MW installed capacity, respectively) and one land-based (60MW) wind farm. For nuclear power there is one EPR-reactor (1600MW) and one AP1000-reactor (1100MW).

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

This is a master thesis work carried out at the Department of Energy and Environment atthe Division of Electric Power Engineering. The master thesis work describes the theoryof distance protection relaying in 130 kV meshed distribution networks. The main aim ofthe thesis was to construct an Excel application for calculation and documentation of thesettings for distance protection relays. The program is based on general methods forcalculating settings of the different zones for the distance relay and presents the settingsin simple graphics using quadrilateral characteristics.The reason for building an Excel based application is the great variety of distanceprotection relays in live networks. The manufacturers of distance protection relays makeprogram for documentation available, however, they are based on the typical settings forthe specific relays.

Problem areaAlfa Laval is a world leading company in the heat transfers area and have the vision to continue to be that in the future as well. The company has a lot of press lines where the utilization is high and also has started to become old. Prognosis shows that there is an increased demand of heat exchanger in the future. This increased demand is not something that existing lines will manage. To build new lines cost a lot of money and take time so it is essential that new lines are correct from the start and not need to be rebuilt or a lot of time spent to trim it.GoalThe goal is to achieve 100% theoretical utilization of the press (the press shall press the amount of plates it is designed for).

The purpose of this project was to study how the interference between two antennas in a MIMO system affects the linearity of the power amplifiers powering the antennas. For the MIMO system, two power amplifiers and twoantennas were constructed and designed using the software ADS and a software defined radio was constructed using the platform USRP and the software LabVIEW. The result was that the interference between the antennas affectsthe linearity of the power amplifiers powering the antennas adversely and a reasonable theory was that the interaction decreases inversely proportional tothe square of the distance..

Linux is a growing operating system in embedded systems. Today, Linux is not only in heavy servers but also in cell phones, PDAs, cameras and other devices running on battery power. While current technology is more energy efficient, more and more technologies are implemented into a single unit resulting in an overall increase of power consumption.Low power consumption is an increasingly important feature of a system today. Lower power consumption means lower costs, less environmental impact, and longer life for applications that runs on batteries.This work compiles methods to reduce power consumption of Linux systems. The work includes examining whether the available opportunities are platform-specific or of a more general nature.