Glulam is a product that was engineered to make use of timber in a more efficient way. Bychoosing timber of similar quality and discarding natural defects during production, thedevelopment of a stronger cross-section is achieved.Carbon fiber is a relatively new material with a high tension capacity. This feature is used toexamine how the bending capacity of the beams improve by adhering carbon fiber laminateson the lower edge of the beamsThe strength of the material is tested with three experiments: carbon fiber on the bottom of thebeam (a), carbon fiber attached to the lower sides of the beam (b) and carbon fiber in thebeam, covered with a layer of wood (c)The results show that the first case, where the carbon fiber is attached to the bottom of thebeam, gave the best result with an increase in capacity of 59 % compared to the nonreinforcedcontrol. The other two cases also show an improvement in capacity, beam-type 3had a capacity increase of 47% and beam-type 4 increased with 25 %Tests were also made with glulam beams reinforced with fiberglass, but these tests were notanalyzed in depth because the purpose was to compare the capacity to carbon fiber. Thisbeam improved its capacity by 40.3%.The tests show that carbon fiber as a reinforcement material for glulam is a good choice whenthere is a requirement for stronger cross-sections in both new production and renovation ofold buildings.

Background: In today's Swedish health care, it is required that the various professionals must work together in teams to safer care. Several professionals with various skills expected working together in the traumateam at the care of the traumapatient. At the same time, research shows that substandard teamwork leads to avoidable errors in care. One way to improve teamwork is to practice. Purpose: The purpose of this study is to shed light on the experiences of the traumateam exercises that exercise participants feel has been favorable for the patient at the initial care of trauma patients.

The objective of this study is to examine the sustainability of recovering industrial wasteheat from several heat sources in a foundry constructed in a plant belonging to ITT Waterand Wastewater in Emmaboda, Sweden. A triple bottom line perspective will be appliedto achieve this objective. The triple bottom line approach takes into account ecologicaland social performance in addition to financial performance. The technology forrecovering the waste heat is a Borehole Thermal Energy Storage (BTES) which is aconstruction consisting of 140 vertical boreholes, 150 meters deep with an internal spaceof four meters.The calculated amount of energy for storage is approximately 3800 MWh annually. Ofthis amount 2500 MWh are expected to be utilized, while storage losses accounts for theremaining part.

The projects objective is to find an alternative method of heating (the current method being via electric heating) the sewage treatment plant on the island Utö in Stockholm?s archipelago in order to reduce the energy consumption and ultimately the cost for heating the plant. The project is given by ?Skärgårdsstiftelsen? (The Archipelago Foundation) and is a part of the larger EU-project ?Green Islands?.A model for the plants total heating demand is established in order to get a good perception of how much money can be saved using alternative heating methods. The heating demand model gives an annual heating demand of approximately 32 500 kWh and a maximum heating power demand of around 24,7 kW.

The structure and performance of grocery distribution in Sweden has changed profoundly since the second world war. Increasing access and usage of the private car, in combination with an accommodating town planning has enhanced the exploitation of scale economies within distribution firms. There is, however, some ambiguity concerning the overall efficiency of the distribution system when the costs associated with travelling and purchasing performed by households are treated as an integrated part of the total distribution cost function. The purpose of this master thesis is to develop the foundation of a spatial optimisation model, which defines the most efficient distribution system. The underlying idea is that the optimal localisation and size of grocery stores is a function of economies of scale within the firms weighed against distributions costs within the households, such as transportation costs.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

Our curiosity was awakened when we became aware that many social workers use "mindfulness" methods in their profession. In this study, we used qualitative methodology in our desire to examine and understand why the mindfulness approach, with its roots in eastern philosophy, is becoming established in society at large and, simultaneously, being used in the social work field. We were interested in when and why social workers choose to use mindfulness with their clients. Our prior research has revolved around development and use of methods in social work, and on the human reaction to stress.We conducted seven semi-structured interviews, which incorporated four comprehensive questions:1. Why has the mindfulness method become established in the social work field and in the culture in general?2.

In cooperation with the Gislaved company Lerocon AB [1], a separation module wasdesigned as a further supplement to the Module System. The aim of theprojectimplementation was that the separation module could be flexible enough to feed themetal pieces, screws, nuts and other items with large variations of size, appearance andmaterial composition. The module should also be cost effective to manufacture.A separation module is a design which is ment to streamline the work in industries withautomation of the lineoperations. The module feeds the details such as screws, nuts, washersand pieces of metal in a continuous flow in which traps separate the details from each other.Traps may vary depending on the purpose and of the details that are fed. Perhaps it isimportant for the user that the detail-orientation is right after the separation module, whichmeans that all the pieces witch aren´t are fed back in return.For companies and industries in lineoperations that can be made more efficient withautomation, are production flow an important watchword.

The natural sciences and the humanities are associated with differentpublishing patterns. Open Access publishing are mainly associated withthe publishing patterns of the natural sciences. Many Swedishuniversities and research funders are proponents of Open Accesspublishing, what will that trend mean to the scholars with a publishingpattern not corresponding to Open Access? In this paper literary scholarsare interviewed for the purpose of learning the motives and strategieswhich form their publishing pattern, and how they relate to Open Accesspublishing. The results show that literary scholars are less competitiveand hold a more gentle knowledge-sharing ideal, than natural scientists.The drive to gain acknowledgment and the recognition of colleagues inorder to collect academic capital as Bourdieu describes the academicfield is still present though.

Energy Director is a control and measuring system for energy consumption and is part of the product portfolio of E.ON AG for more efficient use of energy, offered to business customers. As of today, the system has only one parameter of control, namely power, and the objective of this essay has been to investigate whether other ones could be added. The emphasis is on the environmental perspective, which is why carbon dioxide has served as an example for this parameter in question.Parallel with the study of Energy Director electricity on the margin, calculations of carbon dioxide equivalents and also the Swedish trade of electricity have all been highlighted. Results indicate that when reductions in energy are made it is endorsed to omit from electricity on the margin rather than some mean distributed electricity, under certain conditions, and in addition the calculations of the reductions should be modified regarding the efficiency of the power stations fuelled by lignite and bituminous coal. Sweden practices trade with the Nordic countries as well as Poland and Germany.

Akademiska hus is a real estate company that specializes in providing Swedish universities with housing facilities for educational and research purposes. The company strives to reduce its use of energy by 40% between the years 2000 and 2025. The aim of this thesis is to determine which measures can be taken to reduce the need of purchased energy in a building that is used by theSwedishUniversityof Agricultural Sciences inUppsala.In order to determine the results of various changes to the building envelope and ventilation system, the building was modelled in the computer simulation program VIP-Energy. Other proposed changes to make the use of energy more efficient concerned water use and lighting. The need of purchased energy can also be reduced by producing electricity or heat on site, using solar energy.Results show that economically viable measures include upgrading windows and faucets, adjusting control systems for ventilation and lighting, and installing roof mounted solar panels for power production.

Bakgrund: Finns det verkligen en investeringsstrategi som ger en garanterad överavkastning och som skulle kunna innebära att efterfrågan på de tjänster som professionella kapitalförvaltare tillhandahåller försvinner?Syfte: Syftet med vår uppsats är att undersöka huruvida det går att generera överavkastning på Stockholmsbörsen genom att investera i en portfölj enbart innehållande aktier med låga P/Etal. Frågan är alltså om det existerar det någon så kallad P/E-talseffekt?Genomförande: P/E-talseffekten testades genom att vi för var och en av våra 28 perioder fr.o.m. 1991 t.o.m.2004 skapade två portföljer där den ena innehöll aktier med de femton lägsta P/E-talen på Stockholmsbörsen och den andra innehöll aktier med höga P/E-tal.

The aim of this study is to review the commercial quail production for eggs and meat in the world. Another aim is to review the potential for increased production. Globally the quail production is very small, except in China where it is the second largest poultry industry. The production globally is small despite the quail's rapid growth, early sexual maturity and its high feed efficiency. The quail is also used as a laboratory animal and can be reared to be released in hunting areas.

The purpose of this thesis is to investigate if vacuum insulation panels are a competitive alternative to traditional insulation.Vacuum insulation has been used as insulation in buildings in Germany and Switzerland for a few years. In Sweden the high-performance insulation material is mainly used in refrigerators, freezers and vacuum thermoses. The development is proceeding well and vacuum insulation is becoming more common in the construction industry. Since it is a relatively unexplored material on the market there are many flaws and problems with the material.The questions we have chosen to answer in this report include an increased knowledge of vacuum insulation, various problems that may arise when handling/installation and the pros and cons of vacuum insulation compared to standard traditional insulation.The methods we have chosen to use in this report is a literature study, interviews with various suppliers and manufactures and calculations to show the differences between traditional and vacuum insulation. Vacuum insulation is 5-10 times better insulation than standard traditional mineral wool insulation, mainly at the beginning of its lifetime.Vacuum insulation panels (VIP) have a service life of approximately 50 years, whereas traditional insulation has a service life of approximately 100 years.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.