Title: The development of Free BassIn this work I will explain how the accordion with free bass was developed in Sweden. I will also describe how the people, teachers and musicians, did respond when it was introduced. In this study I investigate Swedish freebass teachers' reflections upon their educational issues. I want to look deeper at how they are reflecting over these two systems, and how they are using them in their daily work. By reading some accordion magazines from the era as a method, I did researching and then I analyzed the articles written about the subject.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

                                  The study aimed to explore how patients with ICDs experience their quality of life with a focus on everyday life, electric shocks, and how support from the health service is perceived. The studydesign is descriptive with a qualitative approach. Semi-structured interviews were conducted with seven patients. Data collection lasted for three weeks and interviews were conducted in the participant´s homes, at the participants? workplaces or over the phone.The study shows that most participants have learned to live with the ICD.

Student recruitment? - Three teachers? thoughts concerning children's first experiences in municipal arts and music schools. The aim of this thesis is to explore three teacher' experiences of recruitment of students to arts and music schools. The thesis includes thoughts about how teachers can inspire students and why the orchestral string bass is an infrequent choice of instrument to study. I have examined the issues through a qualitative study where I have interviewed three licensed string bass teachers of different ages and backgrounds.

Design of a house requires knowledge of both technology and economics. Heating and ventilation shall be designed, costs are calculated and estimated and requirements must be fulfilled. Which heating system is to be elected is also a difficult choice, especially with rising energy prices as a factor.The choice of energy system is not always given, because it depends on several factors. Below is a comparison between district heating, geothermal heat pump and electric boiler from an economic standpoint. In a previous report appears district heating and geothermal heat pump as the best options.

This thesis is about practising on a different level to get an insight to what techniques might work for me as a double bass player. It is about discovering how to use your brain into playing at your best level. I practised both talking and singing to myself and read a lot about thinking and hearing not only the music but every note before playing. The thesis idea came from not having a technique that worked for me while practising alone. I wondered why it is such a difference between what we do at the lessons and what I do when practising by myself..

Syftet med studien är att i relation till musik- och kulturskolornas verksamhetsidéer/planer få insikt i elbaslärares förhållningssätt till vad som är viktigt för nybörjarelever att lära sig. Utifrån detta syfte är avsikten att försöka förstå vilka lektionsmoment elbaslärare prioriterar i sin undervisning av nybörjarelever, varför de valt att fokusera på just dessa och deras syn på eventuella styrdokument för respektive arbetsplats. Jag har i min undersökning genomfört kvalitativa intervjuer med fyra elbaslärare från olika musik- och kulturskolor. Arbetets har sin utgångspunkt i historiska perspektiv på musikkulturskolornas framväxt och de pedagogiska traditioner som format dem samt det sociokulturella perspektivet på lärande. I resultatet framkommer att det viktigaste för informanterna är att eleven får komma igång och spela så snabbt som möjligt och att den huvudsakliga drivkraften i nybörjarundervisning för elbaselever är lust, glädje och upplevelser ? vilket går helt i linje med mycket av de tendenser som behandlas i forskning rörande musik- och kulturskolan samt dess verksamhetsplaner under senare år. Under diskussionsrubriken diskuteras informanternas syn på vad de tycker är viktigt för nybörjarelever att lära sig i relation till de traditioner, idéer och värderingar som enligt det sociokulturella perspektivet styr hur undervisningen formas.

This thesis is a feasibility study for a future product development project. The purpose ofthis project is to evaluate the possibilities and difficulties associated with the design of anelectric power assist servo for all terrain vehicles (ATVs). The project has been carriedout in collaboration with Nira Control AB. Nira designs and manufactures electric andelectro mechanic products mainly for the motor sport market segment.Nira Control AB is developing a fuel injection system for a new line of large ATVs oncommission. To be able to compete with manufacturers like Yamaha and Honda thecommissioner should be able to offer optional power assist steering.

Tumble dryers and drying cabinets have to a large extent replaced the traditional way of drying clothes outdoors. They are faster, more convenient, require less space and can be operated regardless of weather conditions. This replacement has significantly increased residential energy consumption, due to the fact that tumbles dryers consume large amounts of electrical energy. In the USA 9 % of the households electric energy is consumed when drying clothes. Over 4 million tumble dryers are sold in Europe each year and 20 % of the residential electricity consumption in Sweden is used drying and washing clothes.

The project Easy Battery Handling - EBH has been carried out in our auspicial and completedfor Devantini Corporation, a development company in Halmstad with its main concern inenvironmental friendly innovations.EBH has solved one of many technical challenges in one of Devantini corporation?s largerprojects. This main project involves the development of an electric powered formula racingcar. The part of this car that involved EBH was the battery handling to guarantee safe andquick battery exchanges during pit-stops.The solution became an entire battery module, hanging on the side of the car on two spearspointing out from the car. The batteries are exchanged by a specially designed trolley that isinserted under the battery module.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

Studien undersöker hur man på ett praktiskt sätt kan knyta samman musikteori-, gehörs- och ensembleundervisningen. Syftet är att undersöka möjligheten att i jazzsammanhang träna sitt gehör i grupp vid sina instrument. Jag har utvecklat tre gehörsövningar som undersöks i den här studien. Övningarna är konstruerade så att exempelvis pianisten skall övas i att höra basgångar, medan basisten övas i att höra ackordläggningar. En av ensembledeltagarna (piano, gitarr, sång, blås eller bas) styr övningen och väljer hur ackordföljden ska fortsätta genom att följa vissa regler (exempelvis upplöses dominanter alltid ren kvart upp/ren kvint ner).

In Uppsala CHP Plant, there are six pressure reducing valves to reduce the pressure from 15 to 3 bars, before six absorption heat pumps. During the process the energy is conserved but losses occur in form of exergy. The aim of this thesis is to reduce the losses of exergy. This can be done by letting turbines replace the pressure reducing valves.In this thesis an investigation has been done of the conditions today, the conditions after the change from pressure reducing valves to turbines and a comparison of three different types of turbine solutions. The three examined solutions are one turbine, several helical screw expanders and several small turbines in parallel with asynchronous generators.The six absorption heat pumps have been divided into two groups; one group of four and one group of two absorption heat pumps.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.