The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

This graduate thesis is engaged with perceived safety and "safe making" design in public places. Despite the fact that we have never been as safe, questions of safety get more attention than ever in today?s society. Public demands for safer and more secure environments and low levels of experienced feelings of safety indicate problems in society that can shrink people's usage of public places as well as their quality of life. Through methodical exaggeration of danger and legislation of laws, the state creates a situation that in different respect work to overprotect the citizens, who are not unlikely to experience feelings of being unsafe at the same time that the actual safety is to big. An expansion of protection against fear can unlike what was first intended decrease the experience of safety.

The purpose of this study was to investigate the reason behind thedecision by a company regarding the desire to use mobile access to theirERP-system and to discover whether this will involve any loss offunctionally in comparison to using the ERP-system on a computer atthe office. In addition, the pros and cons involved in using mobiledevices for accessing the ERP-system will also be examined. Semistructured telephone interviews were conducted with companies whicheither used or did not use mobile devices in relation to their work. Atelephone interview was also conducted with a consultant who isworking with the implementation of ERP-systems and mobile solutions.The survey showed that companies with staff working in the field assellers, service personnel and construction workers want to gain directaccess to their ERP-system so as to be able to act directly and takedecisions, to have the ability to provide more efficient order processingand to send out invoices more quickly. Those companies which have notopted to use mobile devices at work within this field are those whichare unsure of the connection to the Internet and the capacities availablewithin cellphones.

The Swedish Textile industry has since the beginning of the 70-ties moved their production to countries with cheap labour further and further away. The production in the Baltic countries and Asia has become reality for many Swedish manufacturing companies. With today?s technology the communication with remote countries has ceased to be a problem. The difficulties have instead turned out to be more focused on transportation of goods and just in time deliveries to Sweden.

The different aspects of each individual construction project such as the general conditions, design and economic restrictions as well as many more factors mean it is difficult to standardize building processes or plan in detail based on past experiences. As a result operational efficiency is often reduced, and unnecessary waste is generated. To make an organization more efficient and therefore reduce waste production everybody involved needs to appreciate and understand the improvements that can increase the organization?s efficiency. To investigate these improvements a time study was performed on two different construction sites, both of which involved buildings being constructed of prefabricated steel and concrete elements.

In the last few years people have become more and more aware of how humanity is affecting the climate. In the direction of reducing the greenhouse gases is to design engines with higher tensile properties and reduced weight, in order to achieve lower fuel consumption and cleaner fuel incineration in today's truck engines.In order to achieve these requirements it?s necessary to increase the combustion pressure in the engine. This requires higher tensile properties and high thermal conductivity of the engine material. The department of Component Technology at the University of Jönköping in collaboration with Volvo Powertrain AB, Scania CV AB and DAROS Piston Rings AB has been commissioned to develop this material and to find knowledge of material properties used in truck engines and piston rings used for marine applications.The purpose with this work is to analyze the tensile properties of a series of cast iron, cast under different metallurgical conditions.Four different series of cast irons have been analyzed from four points of view, carbon concentration, nodularity, amount inoculation and cooling rate.After the tensile test all specimen data was analyzed in a mathematic calculation program called Matlab 2006a.

I decennier har problematiken kring förvaltning belysts och i mångt och mycket har motpolerna aktiv- och passiv förvaltning jämförts. Tidigare forskning har påvisat att passiv förvaltning är att föredra framför aktiv förvaltning, bland annat på grund av de dyra förvaltningsavgifterna samt att förespråkarna antar en effektiv marknad. Ämnesområdet är ett väl utforskat område dock i högsta grad aktuellt. Tidigare forskning har inte belyst aktivitetsgraden i aktivt förvaltade fonder och därmed gavs implikation till fortsatt analysområde för den här studien.Syftet med uppsatsen är att analysera om aktivitetsgraden i aktivt förvaltade fonder kan förklara den riskjusterade avkastningen med hänsyn tagen till förvaltningsavgiften. En deduktiv ansats kommer tillämpas för utveckling av existerande teori.

The requirements for wastewater treatment plants (WWTP) are gradually increasing, partly because of higher incoming loads, which in turn require a more efficient treatment process. In parallel with environmental and economic goals there are also desires to lower energy consumption without compromising the wastewater treatment. Furthermore, there is a demand on WWTP´s to alter eutrophication in aquatic systems through better nitrogen and phosphorus removal. An increasing number of WWTP´s have acquired biological nitrogen and phos-phorus removal. A by-product of this type of biological treatment is the formation of nitrous oxide, which is a potent greenhouse gas.

This study highlights the importance of computer technology and its impact on elder care staff's skills development in the public sector. The government presents the digital agenda within which information and communication technology today is considered to have a potential for sustainability, growth and development. According to the EU Commission, there are several important elements that should be improved to digitize the workplace. Among these are digital literacy, collaboration between agencies and increased investments in research, education and innovation. New technology can be understood in different ways by individuals, some see the computer as something positive and exciting, while others may find it hard to see the opportunities for learning and development.

Four different kinds of filter-materials with reactive surfaces have been studied concerning their capacity to absorb heavy metals in leachate from a municipal waste deposit. The heavy metals studied were: lead, cadmium, copper, mercury, chromium, nickel and zinc. The leachate contains high levels of dissolved organic carbon (DOC) and has a high pH-value along with a high buffer capacity. These characteristics of the leachate make it difficult to remove pollutants and require efficient filters. The filters that were examined in the report are blast-furnace slag with CaO, sand covered with iron oxides, olivine and nepheline.

A high quality is highly requested in today?s thinnings, since these are the base for continued value development of the forests. Thinning quality often means a minimization of damages on soil, stems and roots during the cutting. One way to reach a high quality is to set up goals that will be followed up after the cutting is made. Self-checking gives information of the machine drivers work and guarantees the customers a good quality of work.

The importance of energy- and environmental issues has increased, and the work towards reducing carbon dioxide emissions plays a major part. The European Union has set up goals for the membership countries to work towards this to happen. The carbon dioxide emissions in Sweden have been reduced the last few years, but there is still a lot to do. About 30 per cent of Sweden?s carbon dioxide emissions generate from energy usage related to housing, this is why the housing sector is of interest to examine.

The aim of this study is to investigate which communication strategies and channels the mu- nicipal company Falu Energi & Vatten should use in order to become more efficient in com- municating with citizens between 18 to 29 years old. The company is owned by the munici- pality of Falun and manages community services in electricity, district heating, fresh water, sewerage, metropolitan area network and waste disposal. The following theories have been used in the study: convergence culture, digital natives, information overload, communication strategies and uses & gratifications theory. The methods used in the study are 4 focus group interviews and one informant interview. The members of the focus groups where within the age range 18-29 years and lived in the city of Falun.

The world is changing and the business context is no exception. One of the clearest tendencies is a tougher business climate with harder competition due to increased international trade and the expansion of the e-business. At the same time the customers are becoming more sophisticated and demanding. The last decades have also meant that tougher and more frequent demands are being aimed at the businesses from a wider variety of stakeholders; demands regarding how environmental issues, social responsibilities and business ethics should be dealt with. All of the above have driven companies towards implementation of different management systems to be able to cope with the demands as well as to ensure that these issues are being dealt with in an efficient and effective manner.

In the world we live in today the environmental issues has become increasingly important, and we have begun to realize that we can not continue to use fossil fuels at the rate we do. When it comes to generating electricity we are constantly trying to come up with cleaner and more efficient solutions. The fuel celltechnology is one such alternative and has been around for over 100 years. Yet, it is not until now that the world has started to notice this great technology. The fuel cell has been developed in several areas and can today be used for handheld electronics, vehicles and small settlements.