In the production of pulp, paper and cardboard, a large amount of water is used daily. The water has to be purified in the internal purifying plant before it reaches the receiving body of water. In the biological purifying stage at the Stora Enso Skoghall mill, an aerated basin is used where the microorganisms, using oxygen, oxidize the organic material to carbon dioxide. The air is pumped from the bottom of the basin and the oxygen can then be transported from the air bubbles to the water through diffusion. The problem with aeration of waste water from the forest industry is that wood residues, such as fatty acids, are making the transport of oxygen in water more difficult.

Bakgrund: Det senaste decenniet har allt fler stormarknader och lågprisbutiker öppnat vilket har lett till att de mindre livsmedelsbutikerna blivit utsatta för större konkurrens. Parallellt med att stormarknaderna tagit marknadsandelar i dagligvarubranschen har även större fokus riktats mot ökat samarbete och informationsdelning i försörjningskedjan, så kallat Supply Chain Management (SCM). Inom dagligvarubranschen har Efficient Consumer Response (ECR) utvecklas ur samma idéer som SCM men med fokus på livsmedel och dess försörjningskedjor. I grund och botten handlar ECR om företagens gemensamma arbete för att integrera verksamheter, minska kostnader samt producera största möjliga nytta för slutkonsumenten. Med tanke på den ökade konkurrensen i dagligvaruhandeln samt det faktum att det finns ont om tidigare forskning om små och medelstora företag (SME:s) relaterat till SCM/ECR, är det intressant att undersöka hur dessa företag påverkas av samarbetet.

Companies worldwide strive to reduce costs and capital tied up in stock. At the same time, the need for short delivery times requires efficient logistic flows. In order to meet customer demands an efficient warehouse activity is required.The purpose of this study is to develop a model for designing a warehouse system regarding to working environment and safety. The model is primarily designed and based on literature reviews of scientific articles and books, own knowledge and the authors previous work experience in the industry.The thesis has been done at Sandvik AB, the department Precision strip in Sandviken. Sandvik is a high-technology engineering group with advanced products and a world-leading positions within selected areas.

Simulations of simulink models using Kalman filters are often very time-consuming. This problem depends mainly on the fact that the Kalman correction has to be performed at each sample instance through the whole simulation. The goal for this thesis work is to reduce that time-consumption for the filtering part (the integration partis treated in a complementary report) of a simulation. Furthermore a Matlab routine to perform parameter tuning and finally a graphical user interface is developed.The filtering part of the simulation in this thesis is based on an Extended Kalman Filter (EKF). The time optimization of this filter considers searching for the possibility to replace the today?s existing Matlab functions that is used to perform the filtering calculations.

Theability to beat the market is one of the most discussed topics in finance. Thereare very few investors that manage to accomplish this over longer periods oftime. Most of the financial research claims that this is impossible unless theinvestor increase the risk in the portfolio. However numerous of researchershave shown that it exist anomalies on the stock market which either indicatesthat the Capital Asset Pricing Modell (CAPM) or Fama and French three-factormodel fails to explain stock returns or that the market is not fully efficient.One investor that has claimed that the stock market is not fully efficient andthat it is possible to generate abnormal return is Benjamin Graham. Graham isone of the legends on Wall Street and he has shown that by using few variablesbased on public information, one can manage to beat the market over longer timeperiods.There arejust a few studies that have tested Graham?s criteria?s, however all of themindicates that they work but that the standard deviation might be higher forthe portfolios.

This paper treats the question about how the internationally established company, Apple, is affected by intern or extern events when it comes to the trade market. The purpose of the study is to investigate if chosen events create abnormal return on Apples stock market. The chosen research area is Steve Jobs three sick-listings, It-bubble and the purchase of the search engine company Siri. The reason of writing about this is the big interest for the stock market and its function.This study methodological starting position is quantitative done by an event study, with qualitative feature done by an interview with an expertise within this area. When analyzing the empirics, we have used the efficient market theory that says that information should not affect the stock market in the degree that abnormal return creates.

The increasing road traffic in Sweden will require investments in the infrastructure that the tax withdrawal of today will not allow according to a new government report, SOU 2006:33. An existing willingness to pay for those investments has therefore become an alternative to increases in taxation to be able to cover the costs. A proposal to let the willingness to pay, alternatively increases in taxation that act proportional, decide how a cost is distributed can be said to be related, but not fully correspond, with different theories of justice described by Robert Nozick and John Rawls. It can therefore be interesting to see how the two different theories of justice are edified and how they distribute a joint cost. The aim of the first part of the thesis is to present and criticize Rawls' and Nozick's theories of justice in a common formulated economic model.

This two years master's thesis in Library and Information science, examines how the implementation of new technical equipment can affect how staff in public libraries organize their work and activities in the library. One Swedish public library in specific is the subject of research in this thesis, which has been anonymized as Kvarntuna city library. The study takes place in the beginning of the implementation of RFID-technology in the library. RFID, which stands for Radio Frequency Identification, is supposed to make the handling with different types of media in the library more efficient and in connection with the implementation one wants to reorganize work and activities in the library to make it even more efficient and also create a modern library.The thesis' method is qualitative interviews with six members of the staff. The theoretical framework of the thesis is a sociocultural perspective, especially inspiered by Roger Säljö, a Swedish professor in pedagogical psychology.

The aim with my master thesis is to develop and test the applicability of methods to quantify and map solute advective travel times and pollutant transport at the catchment scale. Such quantification and mapping can increase the understanding of catchment-scale pollutant transport in general and contribute to the identification of the main sources of water pollution and the most efficient measures to reduce such pollution. The study area is the catchment of Oxundaån, about 20 km north of Stockholm. For detailed GIS modeling of water flow and catchment-scale contaminant transport in water, I´ve used new high-resolution elevation maps, land cover maps and soil maps combined with other available relevant data..

Today´s roofing of dwelling houses is a very time consuming procedure, which includes a lot of different steps on the construction site. Not only does it cost a lot of money, but often do problems with rot and mold occur in the attics of houses today. The use of prefabricated modules has seen a great breakthrough in the field of construction of dwelling houses; at least when it comes to foundations and walls, where this type of approach makes the construction process way more efficient. What no one previous has succeeded to develop is a corresponding system for roofs that meets the demands of a dwelling house. Accordingly the goal of PlusTak has been to come up with a proper module system for roofing of dwelling houses, where the roofing is completed to meet the demands of the Scandinavian market. During the project a lot of effort has been put into customer contacts and the usability of the product, as well in the manufacturing process as on the construction site. This development has gone hand in hand with several practical tests and tryouts.

Stockholms vattenskärning AB in Kungsängen has through the acquisition of a company begun to design and produce aircraft heaters whose origin is early 1970s which follows a high inefficiency in terms of energy consumption and size.The aircraft heater, which is sold worldwide, serves its purpose for customer satisfaction and has done so ever since it was developed in the 70s.Stockholms vattenskärning AB is now investigating the possibility in making the aircraft heaters more efficient, both in terms of energy consumption but also on a more efficient design with the belief that it would lead them to an edge in the market. The aircraft heater consists of several main components whose function altogether is to keep passenger aircrafts warm while they are on the ground.This project has been limited to the further development of the heat exchanger package which accounts for the conversion of the hot medium to the fresh air being carried in to the aircraft cabin. Work has been divided into different phases in order to create a better understanding of the project range and to make it easier to divide the various elements in the time available, 10 weeks. These phases are literature review, situation analysis, concept generation, CAD, concept comparison and writing reports.After the initial literature review was made, a fundamental theory was written which is essential in understanding the remaining parts of the project.With the theoretical part as support, measurements and calculations were made on the current heat exchange package in a situation analysis to ensure its operation and efficiency.In the concept generation phase, the collected facts from the literature review was used as the basis for creating a matrix. The purpose of the matrix was to indicate the two most suitable types of heat exchangers to develop four new concepts out of.In the CAD phase the four concepts was drawn up and then described with text and images.The last phase is the concept comparison where a concept selection matrix is used to function as a decision basis for further production at Stockholms vattenskärning AB. The four concepts have been developed based on the current heat exchanger and is gradually changed into a design of a cross-flow heat exchanger constructed out of stainless sections. The purpose of this is to have gradual upgrading of the heat exchanger as an option, in order not to saturate the market..

In today?s IT-community, consumers use the internet in a increasing rate to find information or to purchase products and services. This has led to a growth in the market, but also a greater competition between e-stores and web shops. To separate yourself from the masses has become more important, the question is; what strategy should the IT-salesman use? The meaning of this scientific study is to find and focus on witch the primary factors/aspects are, that controls and is the very foundation for the consumer making a purchase, by using the internet.

The thesis discusses new social movements and how they act on the conditions of the late capitalistic society. The purpose is to examine a new social movement trough its own members. What is their view of the movement?s aims and visions? How do they look upon the strategies to achieve these goals? The study is based on eight qualitative interviews with members of Attac Sweden. The results show that the members are highly aware of the movements avowed aims and strategies.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

This essay brings up how experienced texture artists in game development can get comfortable in their workflow and therefore not spend time on learning new techniques that in the end could be more efficient. We base this on theories that people often choose the path of least resistance, which in the case of an experienced texture artist would be the path they have learned and are comfortable with. We also talk about the popularity of Photoshop and that many of today?s texture artists in the game industry are using it and that this could be because Photoshop was one of the first programs that could be used well for texturing. Because of this many learned to use it and stuck by it and then taught Photoshop to new texture artists because that is the program that they know.