The current demanding business environment requires corporations to act fast in finding effective solutions to problems given the myriad of challenges they face (Dyllick & Hockerts, 2001). The challenges include the impact of climate change on business practices, natural resource consumption, chemical pollution, technological change etc. Moreover, the forces of globalization, heightened concerns about the deteriorating quality of the physical environment and increased stakeholder power are also increasingly having a real influence on business practices (Rainey, 2008). Since 1992, the World Business Council for Sustainable Development (WBCSD) has encouraged the adoption of the concept of ecological efficiency (eco-efficiency) to support business efforts aimed at addressing some of these challenges. The aim of eco-efficiency is to reduce the amount of energy and materials used in production processes to achieve economic and environmental benefits (WBCSD, 2000).

Most of today?s concrete structures that are built on site are mainly constructed in a traditional fashion with a lot of artisanal operations. One step towards industrializing the in-situ construction of concrete is to use prefabricated reinforcement. Through this method there can be a lot of savings when each bar doesn?t have to be placed and fixed separately on site.

To meet the needs and demands of the costumer, accurate information about how much is available in stock is necessary. When the information in the system does not match the physical inventory, inventory inaccuracy occurs. Inventory inaccuracy is common among companies and may contribute to increased labor cost, excess inventory, production disruptions, waste of time, late deliveries, poor service and lost customers.The purpose of this study is to identify contributing factors to inventory inaccuracy for business with outdoor storage. The study also aims to investigate how efficiency factors can reduce the inventory inaccuracy for business with outdoor storage.A case study was conducted to answer the purpose. A company in the steel industry was chosen to examine inventory inaccuracy on business with outdoor storage.

Our purpose was to examine why and how to start a ?bridge building enterprise? between qualified Chinese human capital and Swedish structure capital. The theoretical framework consists of literature from well renowned authors and is divided into four different parts: Intellectual Capital, Knowledge Management, China & Intercultural understanding. The empirical foundation has been gathered from a great variety of different sources in an attempt to cover the many complex angels in which this subject can be looked upon. Chinese students, managers in international companies with experience from China, Chinese employees in Swedish companies and different people with good knowledge of different areas of China are all among our respondents.In our conclusion we have reached the three following conclusions for why one should start a ?bridge building? enterprise in between qualified Chinese human capital and Swedish structure capital:-To fill future shortage of qualified human capital in Sweden.-To improve communication between Swedish companies and the Chinese market.-To develop qualified Chinese human capital with western standards..

This report presents the results of a thesis in which the department PL Hus at Grontmij AB isstudied. The study has been done in order to locate problem areas in order to streamline andimprove the quality of working. The study was done by an engineering student from theDepartment of Industrial Management at KTH on behalf of Grontmij AB. The project extendedover a period of 20 weeks during spring 2011.In addition to the Department itself has two project managers in two different projects beenfollowed. The method used has been participant observation and was used to be able to comeclose to reality and thus find problem areas where there are opportunities for development.Validation was made through comments and opinions from workers at Grontmij AB, afterreading the reports analysis.Based on a system and holistic approach has parallels been drawn to the production systems suchas TPS (Toyota Production System) and lean production.

The demand for biogas as vehicle fuel has risen sharply and there is a great need for increased production. A possible addition of vehicle gas can be produced by upgrading landfill gas which is formed by degradation of organic waste. This thesis investigates the potential of producing vehicle fuel from landfill gas in the region of Biogas Öst.In 2008, an amount of 32 million Nm3 landfill gas was extracted in the region. This level can be maintained for another ten years if the efficiency of gas extraction is improved. The annual production will decrease with time since landfills aren?t allowed to receive more organic waste.

AbstractManagement is a field that started getting attention in the beginning of the 20th century by Frederick Taylor. His publication is called the Principles of Scientific Management and is based on the principles of using scientific methods to find the best way of conducting each operation within a production facility. Many of Taylor?s principles may appear obsolete today but the matter of an effective material flow is still highly current. Efficiency is the relationship between the input into an operation and its result.

This thesis examines the relationship between OECD-DAC and Civil Society Organizations (CSOs) within an aid efficiency context. The ability for these two actors to cooperate is highly important and determines the outcome for a major part of the development aid in the new millennium. The development agenda for the new millennium emphasizes aid efficiency as a key to a more successful aid, and this requires increased cooperation between all actors. The analysis made is a discourse analysis. The discourse of aid efficiency is analyzed, both its preconditions and results.The analyze finds out that there is a gap between OECD-DAC and CSOs in terms of how to handle aid efficiency.

Lean Production is used by many manufacturing companies. Companies in process industries do not use Lean Production to the same extent today. This is part of the report's issue to explore how Lean Production can be applied to a company in the process industries.The investigated company is a processing company that manufactures various types of foil. The company wishes to streamline its production and has therefore asked the authors to examine if Lean Production can offer the company improvements in their production. Lean Production value stream mapping tool has been selected to identify and analyze the current state of two of its products in production.

In connection with riding and handling of horses, many accidents that can cause severe injuries to both horses and humans are existent. The cause is in most cases that the horse is frightened. The horse's fear also affects its usefulness and it has been shown to have adverse effects on the horse's welfare. To increase safety and improve the welfare of both humans and horses, it is important to find appropriate training methods to reduce the fear of horses in frightening situations. This experimental study compares handled habituation to free habituation.

AbstractThe Swedish Road Administration in the region of Mälardalen has since 2004 worked to in¬crease the efficiency of the maintance of bridges based on limited functional requirements and time demanded action.The maintenance of the bridges is contracted in the county of Uppsala since 2004, and Örebro since 2007. The county of Nyköping and Västerås is contracted by the traditional system. The contractor will perform a regular maintenance on all bridges. The bridges are inspected by the contractor at least once every year.The contractor registers the result of the inspection in a database called BaTMan. BaTMan is a Bridge and Tunnel Management system and is a strictly web solution were the user logs in via the internet.The Swedish Road Administration also inspects the bridges to se that the demands on the bridges are followed.My work is to compare these different inspections and to see any development..

The aim of this thesis is benchmarking of the program, based on dynamic programming, that earlier was written to imitate the production planning at TSS.This thesis starts with a chapter about the construction of the DP-program, a shorter description of one and each of the program parts and also a list over the in- and output data in each program part. The DP-program consists of six linked MATLAB-files that together produce an optimized production plan for the different planning groups at TSS. The program reads in and reformat the given data and optimize the production of the articles in one group. Finally it compounds all article production plans and give us a production alternative.After running the program with new data the result shows, resembling with previous results, that TSS could be able to make some distinct cost-savings. According to the program, a 50 % decrease of TSS production costs is possible. .

Energy supply in Sweden year 2011 amounted to 577 TWh. The final energy consumption for industrial, residential and service was 379 TWh. Sweden has energy policy goals to reduce energy use in buildings. One of these goals is to reduce the energy use by 20 % in 2020 compared to the year 1995. An important step to achieve this goal is to target energy efficiency measures in existing buildings.

Rising energy prices and higher energy demands have led to an increased focus on energy efficiency, in particular in the real estate business, where high potential for energy savings exists. Within the next few years, buildings that were constructed in the sixties and seventies will be in need of renovation. One of the challenges of these renovations will be to improve energy efficiency. A real estate company that is facing this challenge is Uppsalahem AB, based in the city of Uppsala, Sweden. This study focused on analyzing energy efficiency measures when renovating old buildings.

This report is a study made at Pallco AB. Pallco is a subcontractor that is specialized on steel and aluminium components.The aim of the report is to show an improvement proposal that leads to a reduction of the storage and improve the flow through the production of one item that is a part of a product that Pallco manufactures.With the increasing competition from other countries who can manufacture with lower costs must Swedish companies try to make theirs manufacturing as efficient as possible and remove all waste. By using the tools of Lean Production it is possible to reduce the costs and increase the efficiency.The method we used is value stream mapping. A map of the present condition has been made and then different improvement proposal were discussed. A map of a future condition has also been designed..