The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

Many companies do not register all the stops that occur in a production plant, it often takes longer to report than to fix the problem. If no problems are registered, you cannot trace where the problems arise.This master thesis was performed at AcobiaFLUX and they have noticed an increased demand from their customers to trace problems raised in their processes. The aim of the thesis was to find out how a tool to monitor a process best could be developed. Then the most essential from the theoretical base was developed into a useful tool for operators. For the operators to know if the process utilizes the full capacity of a process, the tool presents a measure of the Overall Equipment Efficiency, OEE.

It is not uncommon for math difficulties and reading difficulties to occur simultaneously. Despite this, math and reading difficulties are thought to have different cognitive profiles where math difficulties are linked to number sense; an innate ability to understand, approximate and manipulate both quantities and numerical information, whereas reading difficulties are linked to phonological ability; an innate ability to understand, create representations of and manipulate phonological information. A possible link between the difficulties is that phonological abilities also could affect mathematical ability. Support for this comes from studies where comorbid math and reading difficulties are associated with more severe difficulties in arithmetic ability compared to those with isolated math difficulties. The purpose of this study is to examine whether isolated math difficulties, isolated reading difficulties and comorbid math and reading difficulties can be linked to deficits in number sense, phonological ability or both of these, and whether comorbid math and reading difficulties differ in performance in mathematical tasks compared to isolated math difficulties for children in second grade.

Objectives. The aim of the present study was to examine the relationship between the personality variables Multidimensional Health Locus of Control (MHLC), Negativ affect and Social inhibition (the D-personality), and health behavior and attitudes toward keep-fit measures.Methods. The participants in this study were 170 embloyees at a regional social insurance office in a midsize town in the south of Sweden. Scales concerning health behavior and attitudes toward keep-fit measures were constructed and the participants completed these scales as well as those of MHLC and D-personality.Results. Participants with strong beliefs that other people, such as doctors or family-members, are responsible for their health, showed a more positive attitude as to keep-fit measures than those with a belief that health is controlled by themselves.

Theory of mind involves the ability to take another person?s perspective in thought, emotions and intentions.  There is today a lack of instruments to assess children?s development of Theory of Mind (ToM) in Swedish. ToM is considered by many scientists to be the basis for development of pragmatic competence. The relationship between these two abilities is complex and not fully resolved. Both abilities are important components for the development of social skills.    The purpose of this study was to compare 4 and 5-year olds ToM-ability measured with a Swedish version of Wellman and Liu?s ToM-scale, Sally Anne and Social Emotional Test with estimated pragmatic competence measured with the Children?s Communication Checklist (CCC).

This study regards the Care of Young Persons Act, LVU, and the 2 § that focus on parent inability to care for their children. The assessment of parent ability to care for their children is performed by social workers in different municipalities. The law leaves room for interpretation concerning how to assess parent ability and therefore we found it interesting to study how social workers interpret 2 § LVU. The study?s aim was also to seek an understanding of how different categories, like gender, race, class and physical and psychical ability of the parents affect the assessment of their parenting ability, with a intersectional perspective.

The purpose of this study was to examine what social workers include in the term "parenting ability". More specifically the purpose was to investigate how social workers view the parenting ability among parents with an intellectual disability. Furthermore the aim was to examine what difficulties social workers come across in their work with families where one of the parents are intellectually disabled. The study was based on six interviews with social workers that specifically work with children under the age of 18, and occasionally come across parents with this type of disability. The interviews were analysed using Donald Winnicott's terms "good-enough-parenting", "holding" and "the holding environment".

Every year new premises are built in Sweden, and even if they are made as energy efficient as possible, this will not reduce the energy demands, but the rate of the increase of the energy use will be reduced. One type of facility in Sweden that is a major energy user is public baths, and this makes public baths an interesting facility to study more closely. There are around 500 public baths in Sweden and about 75 % of those can be seen as older baths with large need of renovation, and they all require a high level of energy efficiency measures. To show how the energy demand increase or decrease depending on the changes chosen to be made, the simulation application IDA Indoor Climate and Energy was used. Simulations were made and compared for several cases, with two extreme cases as starting points.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The purpose of this thesis is to identify the factors that drive efficiency and effectiveness in technical development projects performed at A?F?s department of product development. In addition to identifying and analyzing these factors, the thesis also analyzes what needs to be taken in to account in order to implement a measurement system that is able to both monitor and control the identified factors.The thesis has been performed in a qualitative manner. It is based on interviews with people from several different technological companies, within different lines of business, all of which are customers to A?F?s department of product development.The results show that there are seven critical factors for project efficiency and effectiveness.

The characteristics of free movement is the elimination of obstacles to trade between Member States and thus by such, create free movement within the entire union. Therefore art 34 in the Treaty of Lisabon (FEUF) states that all quantative restrictions on imports and measures of equivalent effect are prohibited. The legal approach to measures having equivalent effect is still unclear and the purpose of this paper is therefore to propose a solution to that particular problem. What can be said when it comes to this rule is that the EU-Court has gone from applying a discrimination test to a market access doctrine.According to the Court´s case law, measures having equivalent effects to quantative restrictions are ?All trading rules enacted by Member States which are capable of hindering, directly or indirectly, actually or potentially, intra-community trade?.  The question of how to apply the test when it comes to a potential hinder to intra-community trade is still unclear.

AbstractThe market?s demand to purchase more cost effective products is continuously increasing. The producers are forced to become more efficient and flexible with resources to produce high quality products at a low cost in order to maintain or increase market shares. With this in mind Isaberg Rapid AB is requesting a project to increase efficiency in the assembly cell of hammertackers. The company has found in Kaizen-events that there is a potential of efficiency improvements in the assembly group that has not been achieved.The objective with this paper is to identify the major factors that influence the efficiency in the assembly cell for hammertackers.

PurposeThe purpose of this study has been to investigate the documentation process following the guiding principles of the Quality Norms for Fall Prevention concerning fall risk assessment, risk identification, fall preventive measures, information and the making of an individual care plan.MethodThis study is a quantitative, descriptive and retrospective journal review study. There were 100 journals examine the existing documentation concerning fall risk assessment of patients who received treatment in geriatric patient care. The sample was consecutively.ResultsThe results showed that fall risk assessment was documented in 79 of 100 examined journals. 56 (71 %) of the fall risk assessments were made within 24 hours. In 59 of 100 journals the patient, relatives or former caretakers was asked whether the patient had had a fall within the last year, and in 61 of 100 journals it was documented that the nursing staff had made an assessment that the patient was going to have a fall during his or her length of stay if no preventive measures were set in.The majority of fall risk factors and fall preventive measures were documented within the areas of walking and transfer. It was documented that the patient was informed of fall risk, fall risk factors and fall preventive measures in 15 of 100 journals.

Energy efficiency is today more important than ever, mainly due to the high energy prices and the approaching climate changes. Heating of buildings is an essential area within energy efficiency. Many buildings are old and were built at a time when the energy prices were low and the term ?energy efficiency? was unheard of. By applying today?s broad range of energy saving actions on these old, and thereby often, heating ineffective buildings, this area has a large potential in reducing energy consumption and costs.Churches and chapels are generally old buildings with, in many cases, ineffective heating systems and therefore consume much more energy than needed.