At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

The study is based on a new approach on how Swedish healthcare is supposed to be controlled and organized. There is a renowned administration problem within Swedish healthcare, which seems to be an obstacle to exploit the resources to the fullest. The latest venture within the healthcare system is patient involvement, where the patients become co-producers of their own care, which aims to both improve and make healthcare more efficient. A few wards in Sweden have implemented this new approach whereupon the study intends to discuss the effectiveness and efficiency in some of these.The study is restricted to three wards, whereof two of these are inpatient wards and the other one is an outpatient ward, within the medical clinic in Jönköping County Council, which has implemented the patient involvement approach in their daily work. The methodology for this study is qualitative in its nature where a time study of personnel time allocation and supplementary interviews with managing nurses on the wards have been conducted.

The effects of the climate changes are expected to generate several substantial direct and indirect consequences on both ecosystems and societies. It is the extent of the negative consequences that determents the vulnerability of the things or the ones exposed. The knowledge of the effects and consequences by a changing climate provides an opportunity to take measures to reduce the vulnerability.Our society?s vulnerability depends on how we choose to act out of the existing knowledge and what measures we choose to take. Karlstad municipality has good knowledge and perception of the increased flood risks the climate changes will generate and the probable consequences that most likely will follow. How the municipality decides to manage the flooding issue is not just affected by the will to mitigate the vulnerability but also by the vision to increase the number of citizens.

This master?s thesis deals with integrating simulations using Agilents Electronic Design Automation tool ADS with customized Matlab scripts, for solving complex analog and digital radio architectures. In particular, it addresses predistortion, realized in the digital domain, of power amplifiers, modeled in the analog domain. The former is implemented in Matlab while the latter is implemented in ADS. Two versions of integrating the two systems have been tested: 1) Iterative approach on sample basis and 2) Scheduled batch solution by matrix inversion.

To meet the needs and demands of the costumer, accurate information about how much is available in stock is necessary. When the information in the system does not match the physical inventory, inventory inaccuracy occurs. Inventory inaccuracy is common among companies and may contribute to increased labor cost, excess inventory, production disruptions, waste of time, late deliveries, poor service and lost customers.The purpose of this study is to identify contributing factors to inventory inaccuracy for business with outdoor storage. The study also aims to investigate how efficiency factors can reduce the inventory inaccuracy for business with outdoor storage.A case study was conducted to answer the purpose. A company in the steel industry was chosen to examine inventory inaccuracy on business with outdoor storage.

Increased competition in the IT industry has sparked a need for developing faster innovation processes with more predictable output. One of the biggest issues when it comes to achieving a faster flow through the innovation process lies in managing its high degree of variation. Proposing a solution to this problem, Lean Software Development (LSD), was developed to provide a framework for how IT companies should organize its software development process to achieve increased speed and quality. This study examines to which extent LSD, as a set of values, principles, methods and tools, can be used to improve flow efficiency in the innovation process. A case study of a multinational IT company was made by conducting ten semi-structured interviews with current employees.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

Background: There are many possible reasons why a patient gets a stoma and in every case it?s of importance for the nurse to adjust nursing care, information and patient education from individual presuppositions. Problem: Patient education regarding stoma self-care is an important part of the nurse?s work within stoma care. The patient is depending on the guidance of the nurse and therefore it is relevant to illuminate the importance of education regarding gaining ability to perform self-care.

This Master thesis is performed at the request of the forest company Mellanskog and the local municipality of Borlänge in Sweden and aims to establish recreational adjusted forest management plan for the areas of Mellsta and Skräddarbacken in Borlänge. In all types of urban forestry it is very important that the management plan are accepted by the general public. To make sure that also these plans of future measures, pass in the public, interview studies have been performed in which the public wishes and interests have been examined and applied in the management plan. To make sure that future measures in the forest may be accepted by the public when the forest harvester enters the woods, it is very important that a well functional work of information has been made. The people living close by the forest shall have been informed a couple of weeks before the time of measures and it must also be good information available that explains what is to be done and why.

I am a practising classical soprano. After more than 20 years of professional singing, I re-trained my voice according to principles of the old Italian school of singing. In this essay, I examine the origins and priciples of bel canto, with special focus on appoggio and chiaroscuro, two key ingredients in the bel cantao tradition. I explore the relationship between science and the craft of singing, and what modern voice science has to say about the efficiency and health aspects of this technique, I also describe the profound effect it has had on me as an artist..

This study is about how to develop younger teens problem solving ability and their social competence. The study carried through by using a qualitative method, two observations and ten interviews. The observations where preparatory for the structured interviews. The respondents where pupils in a class were it is an ongoing project which purpose is to develop childrens problem solving ability and social skills with cognitive training and an empowerment based reasoning model that is called rahyab. Rahyab is a Persian word and it means path- finding.

The purpose was to examine relations between motivation and goal orientation, perceived ability and perceived motivational climate among persons working out in gym. Another purpose was to study differences in motivation, perceived ability and motivational climate among men and women. The final purpose was to study interactional effects on the dependent variable motivation. The participants were 59 men and 69 women. The instruments used were Task and Ego Goal Orientation in Sport Questionnaire (TEOSQ), Harter´s Competence scale and part of Mahoneys R-5 test.

This study is about how to develop younger teens problem solving ability and their social competence. The study carried through by using a qualitative method, two observations and ten interviews. The observations where preparatory for the structured interviews. The respondents where pupils in a class were it is an ongoing project which purpose is to develop childrens problem solving ability and social skills with cognitive training and an empowerment based reasoning model that is called rahyab. Rahyab is a Persian word and it means path- finding.

The examination has been performed at Bjerking AB, which is an architectural and engineering company. Bjerking AB has the ambition to be a member of Green Building.The Green Building program developed in year 2005 by The European Commission, the program is an environmental system with the aim to improving energy efficiency within the sectors of non-residential buildings. The minimum requirements to participate the program are following: in new-built buildings the calculated energy consumption must be 25 % lower than the requirements in the BBR (Building regulations) and in refurbishment the reduction must be 25 % lower than before the optimization.The aim of this study has been to examine and review the company Bjerking AB's energy efficiency work in the project of building the school/kindergarten S:ta Maria Alsike, where the goal is to get this building Green Building classed. A description of requirements to become a member of the Green Building has also accomplished in the thesis.The methods performed in this study are literature review, searches on the Internet, studies on the project database for facts/values, calculation of energy consumption and interviews of members of the Green Building. The following issues have been dealt with in the report;-          Did the building in the project manage the requirement to achieve an   energy consumption that is 25% lower than the requirements in BBR?-          What technical measures/system was selected in the building?-          What kind of cooperation was the project based on?-          What is required for consultancy companies and real estate owners to become members of the Green Building?The study of the project and calculation of estimated energy consumption in the building, give the result 47 kWh/m2, year.

This master thesis was performed as a mission from Holmen Skog with the purpose to investigate to which extent their own machine teams and engaged contractors were exposed to theft and vandalism, and most common preventive measures used. With the help of collected data the study should lead to proposals of preventive measures that can help the machine teams in their struggle to minimise theft and vandalism. Theft and vandalism are a big problem for Swedish forest contractors. In a scarce economic situation thefts and vandalism rapidly decrease the profit for the contractors. However, the last years have resulted in a positive awareness of thefts, and more and better preventive measures have been developed. With the initiative of this master thesis, Holmen Skog show that they are aware of the situation and that they wish to take control of the problem. A total amount of 108 questionnaires was sent out to Holmen?s own machine teams and engaged contractors.