Today more Effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

In May 2010 the plans for Malmö?s new Concert Hall, Conference Centre and Hotel were announced publically. The purpose of this thesis was to present strategy for communication in order to gain approval for the new concert and conference center from the inhabitants inMalmö and to incorporate the use of it in their everyday life.Material from the receiver?s as well as the sender?s perspective has been collected from qualitative interviews. Through group interviews we have investigated the general consensus of the inhabitants of Malmö regarding the investment, placing, offered events, expectations as well as how they collected information.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time Effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

The purpose of this study is to investigate and increase the understanding of how the two commercial companies IKEA and SAS and the two aid organizations/nonprofit organizations UNICEF and Save the Children use perceptions of Christmas to produce messages in their Christmas advertising/commercial film. The study also discusses if there may be communicative and pictorial similarities and differences in how these brands constructs messages in commercials, and why it may be that the brands choose to use these messages in commercials based on the recipient possible interpretations. The theories used in this study are promotional culture, framing theory, preferred meaning, semiotics (denotation and connotation), myth and rhetoric (ethos, pathos and logos). The method used to answer the purpose and issues are the qualitative method that uses the theories semiotic and rhetoric to analyze the material. The study's results derived from the qualitative content analyzes of the material (the brands IKEA, SAS, UNICEF and Save the Children Christmas advertising films) show that IKEA message might want to show that they want to help the customer and that they pay attention to the customer needs.

At the end of April 1986 reactor number 4 of the nuclear power plant at Chernobyl explod-ed and large amounts of radioactive particles were then released into the atmosphere due to both the explosion as well as the consecutive fire of the graphite core. A cloud of radioac-tivity was spread over the northern hemisphere, including Sweden, due to the prevailing wind directions. The radioactive particles were washed out from the cloud by rain and snowfall in some areas of Sweden and deposited on the ground. The deposited radionu-clides, primarily cesium and iodine isotopes, were later absorbed into the soil and taken up by the roots of the plants. Some of these radionuclides, like 137Cs, still persist in some of the terrestrial ecosystems at relatively high concentrations which lead to contamination of the meat of moose, roe deer and wild boar even today.The two municipalities Heby and Uppsala, in the eastern part of central Sweden, experi-enced a relatively large deposition of 137Cs which resulted in high levels of 137Cs in moose and other game.

I takt med stigande oljepriser har ett av Sveriges största odlingsföretag Svegro bestämt sig för att byta ut sitt nuvarande värmesystem. Svegro består idag av växthus på ca 50 000 m2 på Thorslunda gård, Färingsö.Uppvärmningen sker idag med hjälp av oljeeldning samt den värmeenergi som omvandlas från växthuslampor. Det nya värmesystemet kommer att använda sig av ett annat förbränningsalternativ än mineralolja. Detta kommer göra det möjligt för Svegro att sänka sina energikostnader och minska miljöpåverkan genom reducerat koldioxidutsläpp. Kraven som ställs är att det nya värmesystemet ska kunna integreras med det befintliga värmesystemet och samtidigt leva upp till dagens ekologiska krav.

Introduction: Pregnancy, obesity, aging and certain diseases are examples of conditions thataffect the body, its constitution and composition. Simpler methods to estimate bodycomposition are needed to complement more advanced traditional methods to better identifythe health status without sacrificing accuracy and precision.Objective: To validate the results of body composition from bioelectrical impedancespectroscopy (BIS) against results from the study reference method, dual energy X-rayabsorption (DXA), in overweight and obese lactating women after childbirth.Method: The design of the LEVA-study (Lifestyle for Effective Weight loss during lactation)consisted both intervention and longitudinal follow-up, which gave the opportunity tovalidate the absolute values (accuracy) and the ability to detect changes (precision). Themean difference between methods was tested statistically by paired t-test. Bland-Altman plotsused to examine the degree of agreement between BIS and DXA, but also distribution andany systematic differences. Association between methods was measured by using Pearson´scorrelation coefficient.Results: Between BIS and DXA, absolute measurements of the variables fat-free mass (FFM)and fat mass (FM) showed a statistically significant difference (p < 0.001).

In connection with Henriksdals wastewater treatment plant (WWTP) a smaller plant is situated called Sjöstadsverket where new methods for wastewater treatment are tested and evaluated in different process lines. On one of the lines experiments with enhanced biological phosphorous removal (EBPR), have been carried out to evaluate if it is a good alternative to traditional chemical phosphorus removal. This thesis evaluates the results from the experiments conducted during fall 2005.The incoming water from Hammarby Sjöstad consists of only household wastewater, which gives a wastewater with high concentrations of nutrients and organic carbon. This is partly positive, because one of the limiting factors for Effective biological phosphorus removal is the lack of easily biodegradable organic carbon. The high concentrations of ammonium and phosphorus demand a high reduction to achieve the requirements of outgoing concentration.To optimize the process experiments with different recirculations and different aeration techniques have been made.

The purpose of this thesis is to analyze the regulatory power, efficiency and impact of export control on Swedish arms export from the 1980s onwards, linked to the delegation of authority of permit license to the Inspectorate of Strategic Products in 1997. An increase in the administrative sector, based on a collective decision making process and established criteria and guidelines, aimed to strengthen the control of arms export to non-democratic and problematic states. In short, the aim of the study is to investigate and analyze whether there was a decrease in the arms export to problematic states or not. On one hand, it is reasonable to assume that the introduction of the new regulation entailed a more strict arms export policy. However, previous research has showed that regulations are sometimes not Effective since incentives to breach these may be present.The study begins by examining the Swedish case and situation in terms of arms manufacturing and export, as well as the delegation of authority and legislation applied to the field over time.

The subject of sms-loans is examined by using primary and secondary sources?. This form of credit is formally independent from other obligations with a very short credit period and the amount of the loan is low. This form of credits is applied by mobile phones and on the internet by several companies, some of them are presented in this essay. These type of creditors do not come under any sanctions from the Swedish Financial Supervisory Authority as is customary for other creditors, they only need to register.

This study is part of a project to evaluate and develop metods to control the semen quality in stallions. The study was carried out in cooperation between SLU and Flyinge AB. The objective of the study was to analyse -if there are individual differences in sperm chromatin integrety between different stallions -if there is a correlation between subjectively evaluated sperm motility and sperm chromatin integrity -if sperm chromatin integrity is changed after selection of the semen with a centrifugation method through the silica-spheres, gradient or a single-layer, i.e to use the chromatin integrity analysis as a method to evaluate the selection method. The use of chilled transported semen has increased a lot during the last 10 years, especially among the Swedish warmblood breed. Because the foaling percentage has decreased with the increased use of chilled transported semen, there is a need to develop methods to control the sperm quality. Evaluation of the chromatin integrity could be one way to evaluate the quality of the semen. Chromatin is the DNA in the nucleus of the sperm.

The aim of this thesis is to explore the institutional design of Participatory Budgeting (PB) in Sweden and how the design may contribute to realize central democratic goods. The study records the different PB experiences in Sweden and focuses on one particular case, which is the only case that successfully qualifies as a genuine PB-process according to international standards and definitions. To examine this, the following questions are asked: which municipalities in Sweden have implemented Participatory Budgeting? How can the institutional design of Participatory Budgeting be described and to what extent does it enable the realization of central democratic goods? To what extent does the institutional design enable the realization of the democratic goods inclusion, popular control, considered judgment and transparency? To what extent does the institutional design enable the realization of the institutional goods of efficiency and transferability?The study is based on an institutional theory of democracy. The method used is a mixed method ideal type analysis that combines document analysis, surveys and interviews.

Husaberg Scandinavia AB is a company producing and developing a range of motorcycles for both on- and off-road use. Husaberg provided the project group with a task of developing an entirely new way of operating the sequential transmission that can be found in today?s motorcycles. The target was to bring the product from idea to a functional prototype ready for further tests. Operation of the motorcycles transmission is today made by a foot pedal placed on the left hand side of the bike.

Today more Effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more Effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.