To meet the growing amount of waste from electronic and electrical equipment (WEEE) EU developed, year 2002, a directive (2002/96/EG) with the objective to govern the management and reduce the amount of WEEE. The directive is based on producer responsibility which makes the producer responsible for collection and dispose of WEEE. In 2012 a new revised directive (2012/19/EU), with tougher collection targets, was developed. Both the old and the new directive states that the approach to tackle WEEE should be prioritized in order of prevention, reuse and then recycling. Hitherto the amounts of WEEE has increased every year, making it relevant to examine which type of preventive measures the directive contains and how Effective they are.

AbstractThe banking industry has during later years gone through several technological changes (Svenska Bankföreningen 2014). These big changes have led to several advantages seen both from a customer ? and corporate point of view. Advantages in easier usage, increased availability and more competition have made the banks more cost Effective at the same time as the customer is being offered better prices. Even though the advantages seem to weigh over the disadvantages there are still those who thinks that things where ?better in the past?.

Due to recent legal enactments regarding carbon dioxide emissions, the car industry is facing higher demands. An Effective way of reducing these emissions is to minimize the weight of the vehicle. This thesis constitutes a feasibility study on whether or not it is applicable for the car industry to utilize an inner floor structure comprising composite materials. The principal was the projectSåNätt, in which the main participant was Volvo Cars Corp. In consultation with a reference group, consisting of delegates from the industry and KTH, a specification of requirements was produced.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new Effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

In healthcare there is a rapid development towards introducing and implementing a wide range of information technology (IT) to aim for higher quality and more Effective care. A common health information system (Cambio Cosmic) has been implemented in Landstinget Kronoberg. Clinical microsystems are the frontline units where staff and pa-tient meet. When the conditions in the microsystems are changed, it is interesting to de-scribe and analyse the consequences.The purpose of this study is to describe how health care staff uses a health information sys-tem and how they experience its functionality in their patient work. Initially, a literature re-view about the use of health information system was undertaken, followed by a qualitative case study based on interviews about how healthcare staff describes their reality.

Today more Effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Open ecosystems, such as grasslands and pastures, have naturally been shaped by disturbances like fire and grazing. These processes play a crucial role in creating habitats with high biological diversity, particularly favourable for a wide range of herbaceous plant species. In recent years, many of these disturbances have ceased, leading to encroachment, fragmentation and habitat loss. The aim of this study was to examine and compare the effects of fire, herbivory and a combination of fire and herbivory on the emergence of herbaceous plants. The study was conducted at the Ecopark at Nordens Ark.

Introduction: Parents have been shown to be of great importance in preventing cannabis use among adolescents. Parenting practices such as control, open communication and good relations within the family have shown to be protective factors, whereas lack of communication and weak social and emotional support have been associated with an increased risk for cannabis use among adolescents. Aim: The aim of the study has been to explore parents? perceptions about their own importance in preventing cannabis use among adolescents. Method: A qualitative method consisting of focus group interviews has been used to fulfill the aim.

The castration of piglets is performed routinely all around the world. Most castrations are done without anaesthesia and analgesia, despite the fact that this procedure has been proved to induce acute pain and stress for the piglets. The procedure regarding castration of piglets is currently a hot topic of debate and an important political issue. The underlying issue is the boar taint which are highlighted in the heating of the meat after slaughter, which in turn can lead to reduced meat sales as it can be perceived as unpleasant for many consumers. The purpose of this study is to examine alternative drugs which may be selected in order to replace the practice of castration of piglets without anaesthesia, in light of improved animal welfare.

The Bovine respiratory syncytial virus (BRSV) causes bronchiolitis and interstitial pneumonia, predominantly in calves, and is a major cause of bovine respiratory disease worldwide. In humans, BRSV is paralleled by the closely related Human respiratory syncytial virus (HRSV), an important cause of respiratory disease, most severe in infants.The clinical signs and pathology during RSV infection is caused, not only by the direct effects of viral replication, but also by the response of the host immune system. The immunopathology of RSV has long obfuscated our understanding of the disease, and development of Effective treatment and vaccines will be very difficult until greater knowledge is gained.One of the components of the immune system that has come into focus in RSV research the last few years, is the Toll-like receptor 4 (TLR4). The TLR4 receptor is well known as the receptor that binds lipopolysaccaride (LPS), and initiates the host response to bacterial infection. Recently, it has been shown that the fusion protein of RSV also interacts with, and up-regulates the expression of, the TLR4 receptor.

Today more Effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

Today more Effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.

In the low-income countries of the world, rapid urbanization and decaying infrastructure results in an increasingly unsustainable situation when it comes to solid waste management. Often, the solution tends to focus on introducing technical advanced interventions based on the conditions of the high-income world. However, this thesis aims to ?nd site-speci?c solutions on solid waste management at a local scale. By taking in consideration of local conditions a customized approach is possible where the solution is not dependent on expensive structural changes.

There is a need for examining the accessibility of public web sites and for several reasons. First, public organizations possess considerable amounts information of interest to its citizens and which ought to be easily accessible. Secondly, international and national guidelines for web publishing support the different types of requirements experienced by web users and, in particular, with regard to accessibility for people with disabilities. The thesis examines the design of public web sites from two different aspects. Web sites can be built up and structured from the management view of the public organization, or, they can be constructed with a view to user needs and requirements.

Today more Effective computer programs are in use, regarding design of geotechnicalconstructions. There is a risk that the theoretical background of the computerprograms, its limitations and the signification of the choice of soil parameter isforgotten when the computer programs become more user-friendly.This Master thesis deals with simulation and analysis regarding three computerprograms, FEM-design, with the addition Raft, Plaxis and BE-slab. Comparisons aremade for settlement and maximum moment in a concrete-plate. FEM-design is a threedimensional FEM-program, foremost created for design engineers. Plaxis is a twodimensional FEM-program, intended for geotechnical engineers while BE-Slab is aBoundary elements program in two dimensions that is mainly used by designengineers.