This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

The ferry traffic to Gotland is essential for the island?s ability to live and develop. Yearly, it transports 1,6 million passengers, 500 000 personal vehicles and 750 000 lane meters of freight with four Ro-Pax ferries. The traffic is controlled and subsidized by the Swedish government since 1971 in order to guarantee the inhabitants and industry of Gotland a satisfactory transportation service. As a consequence of the past decades increased traffic quality, mainly due to a decrease in crossing times, the traffic?s environmental impact and costs has also increased.The Master Thesis proposes a new energy efficient traffic arrangement that satisfies the users? preferences in the same extent as today.

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

ASSA develops locks and integrated security systems for doors. ASSA is Sweden?s leadingsupplier of locks and security systems. ASSA AB worked during the master thesis withimplementing a common development process for all companies within the group. Ideageneration was one relative unexplored area for the group and the interest of finding effectivemethods was required, the company understood what an effective handling of ideas couldcontribute in the pursuit of more and pleased customers.The purpose of the master thesis has been to study and to map which methods are used inorder to carry out idea generation.

The project has been done in cooperation with Schenker Åkeri AB in Sweden, Halmstad. Theproject is based on an inspection made by Arbetsmiljöverket, where they found minorshortcomings with distribution of goods for the employees. The project is an investigation ofthe drivers? working environment.Schenker Logistics is one of the world's leading providers of integrated logistics services.Schenker Åkeri AB is a subsidiary to Schenker Logistics and transports 2.4 million tons ofgoods yearly.The project started with a background study to evaluate drivers working environment. Wehave studied goods receptions, the working environment, strain injury and injury mechanisms.Methods used was observations, tests, questionnaire surveys and ergonomic andbiomechanical calculations.One result of the study is a working model, which gives recommendations for the maximumweight a driver should push and pull.

An evaluation: how have the goals of ?Vårdkedjeprojektet? been implemented at the treatment centre of RällsögårdenThis evaluation was commissioned on behalf of the treatment centre of Rällsögården. The aim of this study is to evaluate how the goals of ?Vårdkedjeprojektet? (VKP) have been implemented in the institutional care at the treatment centre of Rällsögården. This study was focused on the following questions: a) how is the function ?internal coordinator? experienced by staff at Rällsögården, b) in the function of internal coordinator what aspects are thought of as effective/non-effective concerning the cooperation with ?external coordinators? and contact with clients and staff, c) how is Vårdkedjeprojektet and its treatment approach ?Community Reinforcement Approach? (CRA) experienced by coordinators, clients and staff and d) how well is the aftercare functioning for clients who have finished their treatment at Rällsögården, and still participate in VKP?The choice of research method was triangulation; a combination of qualitative and quantitative methods.

This study aims to evaluate the waste management in Norrbottens municipalities in key areas such as possibilities to reach the two national waste goals, information to the public, the effect of legislation, future of waste management and differences in geographic- and demographic areas. The Waste Framework Directive (WFD) issued by the EU and incorporated into Swedish law plays a major part in waste management by defining a hierarchy in five steps how waste should be treated. Interviews conducted with each of the fourteen municipalities aimed to find out what step in the hierarchy they are at and what effect the implementation of EU-legislature into Swedish law has had. Based on the interviews a diverse range of answers was found in relation to the questions asked, generally the more populated municipalities saw a more positive future of waste management, mainly because more developed infrastructure to handle waste is already in place. However the smaller the municipality is the harder it is to allocate resources for waste management and problems arise in the form of expensive transports of waste.

The term "Project" have become a growing work model that exist in almost all bransches. A project is a work effort made over a finite period of time with a start and a finish to create a unique product, service, or result. Science shows that time limitation has an impact on humans to perform under pressure, which challanges the contributor to deliver. This report contains an examination about project management, both coming from scientific results and an external business. The point of this study is to bring ideas of improvement, which can make the work method more effective in this company..

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Ocean Thermal Energy Conversion, OTEC, a technology using the temperature difference between cold deep seawater and warm surface water, can extract the work in the form of electricity. OTEC gives also synergies of drinkable fresh water. The temperature difference has an impact on the efficiency of the technology, which means that the feasibility of OTEC is geographically limited. The project intends to explore the possibility of replacing the atoll Tarawa?s present electricity generation with an OTEC plant and to explore synergies. In the present situation all of Tarawa?s electricity is generated by fossil fuels.

Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.

Skillingaryds stålrörsindustri AB handles different kinds of steel pipes and got theirmarket mainly in the furniture industry and in department stores. At the momentthe company find themselves in a strong up going course. In a few years thecompany?s turnover has increased with over 10 million SEK. This has led to ademand for structure changes and reorganizing through the company.

The objective of this study is to examine how Lean can make the utilization of inventory more effective and, from a Lean perspective, examine how the value-adding activities related to inventory can increase. To examine this, a case study was perfomed at Svenska Fönster. The conclusions of this study are that Lean can advantageously be applied on inventory to increase the efficiency. .

Since the 19th century the concentration of CO2 in the atmosphere hasincreased by 40 percent as an effect of the use of fossil energy sources.Increased concentration of CO2 will likely lead to increased temperature,changes in precipitation, rising sea level and increased frequency of extremeweather like storm events. A step to reduce emissions of CO2 and mitigateclimate change, for the property of Tagel, can be to adopt new silviculturalstrategies and analyse which is the most effective. As a result of that, threescenarios was produced, business-as-usual (BAU), increased set aside landand energy. An introduction of windpower at Tagels estate (property) andeffects on carbon balance was also examined. By using the Heureka systemand LCA-analysis in this study, it showed that the scenario of increased setaside land was the most efficient way to reduce carbon dioxide (CO2)emissions for the analysed period of 100 years.

The landscape with its associated historical tracks and remains are an important part of our cultural heritage that we consider important to conserve. The stone walls are an example of historical remains that helps to build up this cultural heritage. It is a landscape element that today usually is being associated with the old cultivated landscape, where they mainly functioned as boundary markings and fences. Today, the stone wall is a valuable element in the landscape with ecological, culture-historical and aesthetic values. Since the stone walls arose as elements in the landscape a lot has been changed within the agriculture.