The following essay aims to determine what textbooks and teaching media educators in the county of Västerbotten use when teaching the relation between religion and science. Based on educational science theory and through analyzes of factual texts, the teaching materials was examined to determine how much focus they put on the thematic of religion and science. The result shows how the different teaching materials affect this thematic differently. The main conclusion is therefore that students in Sweden could, depending on the teaching materials used in their education, be taught by different standards to reach the same requirements..

Utvecklingen på den teknologiska marknaden har kommit att påverka företag i en allt större utsträckning då marknadsföring på Internet blivit allt viktigare. Den ökade använd-ningen av smartphones har bidragit till att fler och fler människor ständigt är uppkopp-lade vilket i sin tur har öppnat upp för nya sätt för företag att skapa relationer och att inte-ragera med sina kunder. En bidragande faktor är sociala medier som har öppnat upp för interaktion där företag och kunder kan kommunicera med varandra. De har även öppnat upp för kommunikation kunder emellan, vilket både skapar positiv och negativ word of mouth. I takt med utvecklingen av den nya telefonin, har mobilapplikationer kommit att få en allt större betydelse som marknadsföringskanal.

With help from Hälsoteknikcentrum the need for storage of medical items in the home care section has come to our attention by an investigation that Hälsoteknikcentrum did. Facilea and the nursing stuff at Eketånga home care have developed a product specified to improve the work situation for both the nursing staffs and the patients.The trolley is equipped with a special module to make the trolley more adjustable for the recipients and the nursing staffs needs and desires. The product also collect all the care items in one place. Which gives the care patient and its relatives a possibility to gather all the medical items in one place and don?t have to put these in bookshelves etcetera.After surveys, interviews and home visits a prototype was built.

This paper is a study of 18 extant pieces of panegyrical music for the Swedish king Karl XI (1655?1697). The compositions are preserved in two forms. There are a few contemporary prints, but the largest amount of music is preserved as manuscripts in the Düben­collection (Uppsala University Library). The paper focuses on four different aspects of the production of these 18 compositions.

The objective of this thesis was to get more knowledge before an alternation of generations. In theses I have chose to make two drawings, one for dairy cows and one for cattle rearing. The drawings are made for a future alternation of generations at my parental home in the province Dalarna. The results are made out of educational visits at different farms and literature investigations. Those dairy farms who I visited had different milking system at each farm and the cattle farm I visited had beef production. The farms are placed in the middle and south of Sweden. At 1998 the Swedish Board of Agriculture decided to change the stall breadth and stall length and the result of this is that many farmers had to rebuild their cattle- and dairy buildings or end farming..

This is a thesis performed at GEMS PET Systems AB in Uppsala. GEMS PET Systems AB is a company within GE Healthcare. GEMS PET Systems develops and manufactures equipment for manufacturing of radioactive isotopes for PET which is a scanner used in medical applications. The systems includes an accelerator of cyclotron type and other support equipment. One system is shipped in two or three containers depending on order configuration.

This bachelors thesis was made forWallenius Water AB to develop a basisfor an Airpurifier prototype. Wallenius Water isone of the world's leading environmentaltechnology companies engaged inchemical-free water treatment based onUV-radiation. The thesis aim was toproduce a basis for a prototype that canbe used in three applications:Standalone, RAS systems and ventilationsystems. The work includes anintroductory description of the theorybehind AOP technology based on aliterature review on the subject. Asurvey of products currently on themarket and a product specification hasbeen used as the basis for thepreparation of a number of concepts inthis report.

Syftet med denna undersökning har varit att ta reda på vilket sätt förskollärare använder dans som ett pedagogiskt verktyg med barn i åldern 1-3år. Jag använde mig av en kvalitativ metod och undersökningen genomfördes med hjälp av intervjuer av fyra förskollärare som var slumpmässigt utvalda. Därefter drogs det paralleller mellan intervjuernas svar och den valda litteraturen.Resultatet visade att samtliga förskollärare ansåg att dans var mycket viktigt för barnens utveckling. De använde sig av dans på något sätt i sin verksamhet men det var inte alla som ansåg att de använde dansen som ett pedagogiskt verktyg..

This paper discusses the advantages and disadvantages of using different benchmarking models to measure and compare the efficiency of Swedish gas distributors. It also discusses to which extent the results of a benchmarking study should influence the revenue-cap which will be implemented in the gas distribution sector in Sweden from year 2011. The discussion is based on arguments from both theory and practical applications of benchmarking. The results suggest that benchmarking Swedish gas distributors against distributors in another country using a parametric model is most favorable, but the reliability will be increased if non-parametric models are used also. Partial and total productivity measures could be used to confirm results of other benchmarking analyses.

When developing software that is meant to be distributed over several different computers and several different networks while still working together against a common goal there is a challenge in testing how updates within a single component will affect the system as a whole. Even if the performance of that specific component increases that is no guarantee for the increased performance of the entire system. Traditional methods of testing software becomes both hard and tedious when several different machines has to be involved for a single test and all of those machines has to be synchronized as well.This thesis has resulted in an exemplary application suite for testing distributed software. The thesis describes the method used for implementation as well as a description of the actual application suite that was developed. During the development several important factors and improvements for such a system was identified, which are described at the end of the thesis even though some of them never made it into the actual implementation.

Denna uppsats är skriven med syftet att belysa elevers åsikter inom området pedagogiskt ledarskap i klassrummet. Detta undersöks genom en kvantitativ enkätundersökning besvarad av 107 elever i årskurs 6 i Malmö. Frågeställningen som gav upphov till undersökningen är: Vilken typ av ledarstil föredrar elever och vad påverkar deras motivation i skolarbetet? Vi presenterar vårt resultat i deskriptiv statistik och använder oss av behavioristisk samt humanistisk teori för att analysera våra resultat. Resultatet och slutsatsen visar att eleverna trivs bäst med en humanistisk ledare men finner motivation i de typiska behavioristiska förstärkningarna så som beröm och till viss del bestraffning..

The purpose with this essay is to illustrate what divides and unites three educationalists approach on ?children in need of special support? within the first years of school. Three educationalists with significant positions within the school system have been chosen for interviews. On basis of the results of the interviews three themes has been selected and divided into the conceptions; ?children in need of special support?, ?resource? and ?a school for everyone?.

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

In this project we have explored digital tools for service management on the bicycle paths of Malmö. This was done through the participation of citizens in order to attempt to discern how such interactions can be eased using a mobile app, as well as how this app can be designed in order to appear trustworthy with user friendly interactions. We have explored this field by using goal-oriented design through interviews, prototyping and user tests. We have created a digital prototype as a possible solution for how the interactions can be done. Throughout the process interviews were held and user tests with selected members of the user group. To explore the concepts we have used paper prototypes in order to establish the design and then defining the interactions with the help of a digital prototype. Finally we have concluded that a general app for bikers in the city would be functional and that a longer study in the effects of such an app would be interesting as a continuation of this work..

IntroduktionMedicinsk vetenskap och sjukvårdens möjligheter att hjälpa utvecklas ständigt. Sjukvården idag kan i många fall ställa rätt diagnos och ge en effektiv behandling för att bota den som drabbats av ohälsa. Radiologiska undersökningar är ett viktigt hjälpmedel men innebär också risker i form av strålning samt felaktigt resursanvändande.SyfteSyftet med förbättringsarbetet var att skapa en bättre användning av radiologi och följsamhet till medicinska riktlinjer så att patienten får rätt undersökning utifrån sitt behov samt att resur-ser nyttjas mer optimalt. Målsättningen var att öka andelen berättigade undersökningar.Syftet med studien av förbättringsarbetet var att få en förståelse förvilka faktorer som påverkar remittentens val av radiologisk undersökning och därmed berättigandegradenvilka aktiviteter i förbättringsarbetet påverkar berättigandegraden och på vilket sättMetodInterventioner i form av utbildning och mätningar användes för att höja berättigandegraden. Bedömning av berättigandegraden gjordes av en ST-läkare.En fallstudie med kvalitativ ansats genomfördes och fokusgruppintervju användes för att stu-dera förbättringsarbetet.ResultatStudien visar att berättigandegraden ökar något som ett resultat av de valda interventionerna.